How to Fix Android App Not Installed Error on Tecno Spark 10 4G Quickly?

App not installed on Android is no more an unknown Error Code during Application installation as many people experience it on a day-to-day basis. An “Application not installed” error message usually pops up when you are trying to download and install an App with a .apk file extension from somewhere other than the Google Play Store. The error is very confusing at first but makes sense when you realize that this unknown Error Code during Application installation is neither a software issue nor a hardware problem. It is a direct outcome of what you do with your device. Yes, you heard that right. Your faulty actions can cause Android App not installed error.

What to do when trying to install the Android APK it says “app not installed”? It is terrible that you can’t install App on your device. But in this article, you will know more about the causes behind this error and the best ways to fix it, read on, here is all you need to know.

Part 1: Common reasons for the “Android App not installed” error

You may ask: Why can’t I download apps on my Tecno Spark 10 4G? Understanding the underlying causes of the “Android App Not Installed” error is crucial for resolving the issue effectively. So, what are the reasons for Android App not installed error? Given below are a few reasons:

1. Insufficient storage

Android software and if data such as photos, videos, music, messages, apps, contacts, emails, etc are stored in the internal memory there is not adequate storage left for another App, leading to Android App not installed error.

2. Corrupted/Contaminated App file

When you do not download Apps from the Play Store and choose another platform to do so, App files are usually corrupted and hence cannot be installed on your device smoothly. You should be doubly sure of the source from where you download an App, check its extension name, and make an effort not to install contained files.

3. SD Card not mounted in the Tecno Spark 10 4G device

At times your phone could be connected to your PC or another electronic device that can access the SD Card from your device. In such situations when you install an App and choose to save it to your SD Card, you will see Android App not installed error because the App cannot find the SD card as it is not mounted in your device.

4. Storage location

You must be aware that certain Apps work their best when stored in the Tecno Spark 10 4G device’s internal memory, whereas others need to be located on an SD Card. If you do not save the App in an appropriate location, you will find that the App isn’t installed because of an unknown Error Code.

5. Corrupt storage

Corrupted storage, especially a corrupted SD Card, is known to cause the Android App isn’t installed error. Even the internal storage can get clogged due to unnecessary and unwanted data, some of which might contain an element that disturbs the storage location. Take this issue seriously as a corrupted SD Card and even clogged up internal memory can put your device in danger.

6. Application Permission

Software operations running in the background and App Permission are not new concepts. Such errors can also cause the Unknown Error Code during App installation.

7. Incorrect file

If you already have an App installed but download another variant of it having a distinct signed or unsigned certificate can also make the Android App not installed error pop-up. This sounds technical, but this and all the other reasons listed above can be tackled by you.

The Unknown Error Code during Application installation can occur due to any one or more of the reasons stated above. So read them carefully and understand them well to avoid such glitches in the future.

Part 2: One-click to fix App not installed on Android error

So App not installed on your Tecno Spark 10 4G or tablet? The most horrible part is that this issue may come out of the corruption in the system files. In this situation, Android apps won’t be installed no matter what measures you take. Android system repair is the only effective solution to deal with this issue.

Android system repair used to require high technical skills. But most of the users know little about technical things. Well, worry not! Dr.Fone - System Repair (Android) allows you to repair Android easily, that is, complete the fix with just one click.

Dr.Fone - System Repair (Android)

A powerful tool to fix the “Android App not installed” error in one click

Fix all Android system issues like Android App not being installed, the system UI not working, etc.
One-click to fix Android App not installed. No technical skills are required.
Support all the new Tecno Spark 10 4G devices, etc.
On-screen instructions are provided to prevent any misoperation.

3981454 people have downloaded it

Note: Getting your Android system repaired may erase the existing device data. It is recommended that you should back up your Android data before starting the Android repair.

The following steps illustrate how to fix the “Android App not installed” error in one click:

Install Dr.Fone on your Windows. After that, launch it, and click “System Repair”. Connect your Android to the computer.

Select the “Android” option and click “Start”.

Select device information, such as brand, name, model, country, etc., from each field, and type “Next”.

Follow the on-screen instructions to boot your Android in download mode, and allow the tool to download the firmware to your device.

After the firmware is downloaded, the tool will start to repair your Android, hereby fixing the “Android App not installed” error.

safe & secure

Part 3: How to fix App not installed error on Android

We understand that it can be a tricky situation to be in when Android App not installed error pops up, but what if we tell you can get rid of it in easy and simple steps? Yes, there is!

#1. Delete unnecessary files/Apps

Insufficient storage can prevent the app from being installed. Make some storage space on your device by cleaning unwanted data and deleting extra media and other files. You can also get rid of heavy Apps by:

Visiting “Settings” on your device. Then select “Manage apps”, “Application Manager” or “Apps” (varies based on device model or version) from the list of options before you.

EaseText Audio to Text Converter for Windows (Personal Edition) - An intelligent tool to transcribe & convert audio to text freely

Now select the App you wish to uninstall and wait for the App Info screen to open, then click on “Uninstall” as shown in the screenshot.

You can also uninstall the unnecessary application on the home screen, just long-press the app you want to uninstall until you see the “uninstall” icon. Click “Uninstall”, then, you need to click “OK” to confirm the uninstall process.

#2. Use only Google Play Store

As you are all aware, the Play Store is specially designed for Android software and contains only trusted and safe Apps. It is often known as the “Android Market” because it is loaded with different types of Apps to stiffly all your needs so that you don’t have to rely on other third-party sources to purchase/install Apps.

#3. Mount your SD Card

Another remedy for Android App not installed error is to make sure that the SD card inserted in your device is not inaccessible.

To check the same:

First, disconnect your Tecno Spark 10 4G from your PC and then visit “Settings” on your Android and select “Storage” from the options that appear. Finally, click on “Mount SD Card” at the Storage Info screen.

You can now restart your device and try to install the app now, it should work!

#4. Choose App location wisely

It is advisable to not tamper with the App’s location and let the software decide where it needs to be placed. As far as possible, let the Apps be in your device’s internal memory.

#5. Format SD Card

The chances of your SD Card being corrupted are very high. You can format it either while it is in your device or externally.

Now to Clean up your SD Card, simply visit “Settings” and select “Storage” and tap on “Format SD Card” and mount it once again to use it smoothly.

#6. App Permissions

You can reset App permissions to combat the Android App not installed error by Visiting “Settings” and then selecting “Apps”. Now access the Apps menu and hit “Reset App Preferences” or “Reset application permissions”. This will allow third-party apps to get installed on your device.

#7. Choose the correct App file

Make sure to always download an App file only from a trusted and safe source to avoid any errors during installation.

#8. Reboot your device

Finally, if nothing else works, restart your device to end all operations which could be causing the said error. To reboot, just press the power button till you see a pop-up. Select “Restart” and wait for your device to reboot.

Conclusion

Encountering the “App Not Installed” error on Android can be frustrating, but by understanding the causes and implementing the appropriate solutions, you can overcome this issue. We saw that Android App not installed error can be fixed quickly if you keep in mind the tips given in this article. However, please ensure that you follow each instruction carefully to avoid any further goof up.

safe & secure

PCDJ Karaoki is the complete professional karaoke software designed for KJs and karaoke venues. Karaoki includes an advanced automatic singer rotation list with singer history, key control, news ticker, next singers screen, a song book exporter and printer, a jukebox background music player and many other features designed so you can host karaoke shows faster and easier!
PCDJ Karaoki (WINDOWS ONLY Professional Karaoke Software - 3 Activations)

How to Fix It: Tecno Spark 10 4G Won’t Turn On

Did your Tecno Spark 10 4G decide to go on vacation and refuses to turn on? If your Tecno Spark 10 4G won’t turn on for no apparent reason, finding why it failed to power on and the solution for it is not a fun process.

Here, we hope we are able to give you a checklist of reasons behind this issue and the possible steps you can take to rectify it.

Part 1: Common Reasons That Your Tecno Spark 10 4G Won’t Turn On

If you cannot find any reason why your Tecno Spark 10 4G will not switch on, here are some possible reasons:

Your Android phone is simply frozen in power-off or sleep mode. In which case, it fails to switch itself on or wake itself up when you initiate it.
Your phone’s battery may be out of charge.
The operating system or installed software is corrupted. The tell-tale sign if this is that if you manage to switch on your Tecno Spark 10 4G, it freezes or crash soon after.
Your device is clogged up with dust and lint causing the hardware to not work properly.
Your power button is broken , which caused it to not be able to trigger the necessary action needed to power up the Android phone. Check to also see if your connectors have no carbon build-up which will cause your phone to not be charged properly.

Part 2: Rescue Data on Android Phone That Will Not Turn On

If you need some help rescuing data from an Android phone that will not turn on, the Dr.Fone - Data Recovery (Android) will be your best friend in your data recovery attempt. With the help of this data recovery solution, you will be able to intuitively recover lost, deleted or corrupted data on any Android devices. Its flexibility and efficiency in rescuing data make it one of the best software out there.

Note: For now, the tool can rescue data from broken Android only if your phone is earlier than Android 8.0, or rooted.

Dr.Fone - Data Recovery (Android)

World’s 1st data retrieval software for broken Android devices.

It can also be used to recover data from broken devices or devices that are damaged in any other way such as those stuck in a reboot loop.
Highest retrieval rate in the industry.
Recover photos, videos, contacts, messages, call logs, and more.
Compatible with Tecno Spark 10 4G devices.

3981454 people have downloaded it

If your Tecno Spark 10 4G won’t turn on, here is how you can use the software to recover data:

Step 1: Launch Wondershare Dr.Fone

On your desktop computer or laptop, open Wondershare Dr.Fone. Click on Data Recovery on the left column. Connect your Tecno Spark 10 4G to the computer using a USB cable.

Step 2: Decide which file types to recover

On the next window, you will need to check the boxes corresponding to the type of files you can recover from a list. You can get back Contacts, Messages, Call History, WhatsApp messages & attachments, Photos, Audio and more.

Step 3: Select the problem with your phone

Opt for “Touch screen not responsive or cannot access the phone” or “Black/broken screen”. Click Next to continue.

Look up for your device – pick the Tecno Spark 10 4G device Name and Device Model. Advance by clicking on the Next button.

Step 4: Go into your Tecno Spark 10 4G’s Download Mode.

The data recovery tool will guide you on how you can go into your Tecno Spark 10 4G’s Download Mode. You should be getting a step-by-step guide on your computer.

Step 5: Scan the Android Phone.

Using the provided USB cable, attach your Tecno Spark 10 4G to your computer – the data recovery tool should be able to discover your device automatically and scan it for recoverable data.

Step 6: Review and Retrieve the Data from Broken Android Phone.

Wait for the program to finish scanning the phone – once completed, you will be able to get a list of recoverable files. You can have a preview of the file by highlighting them. Tick the box next to the file name and click on Recover to start retrieving the files and save them in the destination of your choosing.

Part 3: Android Phone Won’t Turn On: One Click Fix

After repeated attempts, when your Android mobile/tablet stops buzzing, what options do you have to revive it?

Well, we would recommend picking Dr.Fone - System Repair (Android) to fix an Android phone will not switch problem. This one-click Android system repair tool resolves every Android system issue without any fuss including Android Phone won’t turn on issue.

Dr.Fone - System Repair (Android)

The real fix to issues like “Android phone will not switch on”

This tool is aptly effective for all the latest Tecno Spark 10 4G devices.
With a high success rate for fixing Android devices, Dr.Fone - System Repair (Android) ranks at the top.
This is a single click application to fix all Android system issues effortlessly.
It is the first tool to repair all Android system issues in the industry.
It is intuitive and requires no tech expertise to work with.

3981454 people have downloaded it

Prior to fixing the Android phone will not switch and getting things back in action. You need to make sure that you have backed up the Android device . It is recommended that rescuing data from an Android phone by backing up is better than recovering it post the process.

Phase 1: Get the Tecno Spark 10 4G device ready and connect it

Step 1: Run Dr.Fone on your computer once the installation is complete and tap the ‘Repair’ option form the interface. Now, connect your Android mobile with the computer.

Step 2: You will find a range of options, tap on the ‘Android Repair’ one. Hit the ‘Start’ button so that you can proceed to fix Android Phone won’t turn on hassle.

Step 3: Now, over the Tecno Spark 10 4G device information window, ensure to feed your exact device details. Press the ‘Next’ button then on.

Phase 2: Enter ‘Download’ mode for fixing your Tecno Spark 10 4G

Step 1: You need to put your Tecno Spark 10 4G in Download mode for resolving the Android phone will not switch on.

For the Tecno Spark 10 4G device having ‘Home’ button, you got to switch it off and press ‘Volume Down’, ‘Home’, and ‘Power’ keys for 5-10 seconds at once. Let them go and click on the ‘Volume Up’ button to put your phone in ‘Download’ mode.

For ‘Home’ button-less device, turn the phone/tablet down first. For 5 – 10 seconds, hold down the ‘Volume Down’, ‘Bixby’, and ‘Power’ buttons. Tap on the ‘Volume Up’ button to get into the ‘Download’ mode, after releasing the 3 buttons.

Step 2: Hitting the ‘Next’ key will allow you to download firmware and proceed with the next step.

Step 3: Dr.Fone - System Repair (Android) would verify your firmware download and then take a while to rectify and resolve Android Phone won’t turn on issue.

HD Video Converter Factory Pro

Part 4: Android Phone Won’t Turn On: Common Fix

To try fixing an Android Phone that won’t turn on, follow these steps:

For any Android devices, remove the battery (considering the battery of your Tecno Spark 10 4G can be removed) and leave it out for at least 30 minutes. Put back the battery in and try to turn it on.
Press and hold down the Power and Volume Down buttons at the same time for 15-30 minutes to reboot the Tecno Spark 10 4G device.
Should the first two steps do not work, charge your Tecno Spark 10 4G to get it out of the start-up loop. You can also opt to use a different battery, just in case your current battery is the source of the problem.
If there are any connected hardware e.g. SD card, remove them from the Tecno Spark 10 4G device.
Start your Tecno Spark 10 4G in Safe Mode by pressing and holding down the Menu or Volume Down button on your device.
Should the first five steps do not work for you, perform a hard reset. Do take note that each device will have a different way to do so and that data that is stored locally on the phone will be deleted.
Send your Tecno Spark 10 4G to the repair shop should none of these steps work.

Part 5: Useful Tips to Protect Your Tecno Spark 10 4G

There are several reasons as to why your Tecno Spark 10 4G won’t turn on. The problem could be a hardware or software issue which could be prevented. Here are some useful tips to protect your Tecno Spark 10 4G.

I. Hardware

Remember that the components that make your Tecno Spark 10 4G is sensitive. To protect these components from being damaged, use a good guard casing.
Take apart your Tecno Spark 10 4G and clean it routinely to avoid dust and lint from clogging the phone and overheating it.

II. Software

It is recommended to download apps from Google Play Store. This way, you can be sure that your app comes from a trusted source.
Read the app’s permission to see which part of the operating system and your personal information that you are giving access to.
Install reliable anti-virus and anti-malware software to safeguard your Tecno Spark 10 4G from malicious attacks.
Make sure you update your operating system, software and apps to make sure you have the latest version – the developer may have fixed the bugs that have caused problems on Android phones.

It is important to note that your phone contains some important data. Therefore, when your Tecno Spark 10 4G won’t turn on do not just give up - there are plenty of tools at your disposal to recover back your files and phone.

Gmail Not Working on Tecno Spark 10 4G: 7 Common Problems & Fixes

Ever since Android is introduced, it has almost eliminated the need of computers to work through Gmail. Gmail carries much importance especially when you’re a working person. A lot of work is done through mails on daily basis. But maybe today is not your lucky day. Maybe Gmail is giving you a hard time today. Is it? Is your Gmail not responding or keeps stopping you from going further? Well! There is no need to be bothered anymore. We are discussing some of the general Gmail problems along with their fixes. So, if your Gmail is not working on Android, you can go through this article and find the relevant solution.

Problem 1: Gmail App not responding or keeps crashing

First and foremost, the most common situation people meet with is when there Gmail keeps crashing. Or simply, it doesn’t respond at all. When you open it, it stuck for a few seconds and then you have to close it. It seriously is an annoying issue. If your Gmail is also not responding or crashing and you aren’t able to work properly, following are the solution you can follow.

Clear Cache

The first thing you can do to fix Gmail not responding issue is to clear the cache of Gmail. This has higher chance to get the issue resolved. To do this:

Go to “Settings” and look for “Apps & Notifications”. Please note that the option may vary in some Android phone like it maybe “Application” or “App Manager”. So, don’t panic and look for the option carefully.
Now, from the apps list, search “Gmail” and tap on it.
Go to “Storage” followed by “Clear Cache”.

Restart the Tecno Spark 10 4G device

Restarting the Tecno Spark 10 4G device in the first place simply resolves many problems and so in the instance when Gmail keeps stopping. Simply long press the power button of your device and restart the Tecno Spark 10 4G device. See of the problem gets vanished or not.

Factory Reset the Tecno Spark 10 4G device

The next option that you can try is resetting your device. This will lead to data loss so we suggest you to take backup firstly and then proceed with this method.

Hit on “Settings” and search for “Backup & Reset” option.
Tap on “Reset” or “Erase all data” (the option name again may vary).

If unfortunately the above solutions don’t work, there is a requirement to flash the stock Android ROM again. Before you wonder how, there is a professional one-click tool that can surely be of assistance. It is Dr.Fone - System Repair (Android) . The tool takes special care of the Android phones and fixes almost every system issues with ease. It takes no special technical skills and performs efficiently.

Click here

## Problem 2: Gmail won’t sync between all ends

The next most common problem where people get stuck with is when there Gmail won’t sync. Here are the solutions to this particular problem.

Make Space in the Phone

When Gmail stops syncing, one of the things that can save you is clearing the storage. It is the space that maybe the culprit and therefore the syncing don’t work at all. We would like to suggest you removing the unwanted apps to clear the storage or deleting the downloaded files. You can also transfer the important files to your computer and make the space vacant.

SwifDoo PDF Perpetual (2-PC) Free upgrade. No monthly fees ever.

Check Gmail Sync Settings

When still the Gmail not working issue persists and you can’t sync, make sure to check the Gmal sync settings. For this, follow the steps below:

Launch the Gmail app and tap on the menu icon (three horizontal lines).
Tap “Settings” and choose your account.
Check the box next to “Sync Gmail” if it’s not checked.

PDF application, powered by AI-based OCR, for unified workflows with both digital and scanned documents.

Restart the Tecno Spark 10 4G device

Again, restarting can also be helpful in this situation. When you boot the Tecno Spark 10 4G device again, check if your Gmail can sync or not.

Problem 3: Gmail won’t load

In case you are using the Gmail over your web browser and it has tested your patience in loading, here are the solutions that could prove to be fruitful for you. Please check these out.

Ensure to Use Gmail Supported Browser

First of all, you need to make sure that the browser you are using works with Gmail or not. Gmail can smoothly perform in Google Chrome, Firefox, Safari, Internet Explorer and Microsoft Edge. However, the browsers should be updated. So, please make sure that these browsers are running on the latest versions. Moreover, in case you use Chromebook, don’t forget to update the operating system in order to let it support Gmail.

Clear Cache of web browser

If you tried the above method but to no avail, try to clear the cache and cookies of the web browser. But by doing so, the browser history will be removed. As well as, the records of the websites you previously enjoyed will also be lost.

Check browser extensions or add-ons

If not the above one, try this tip. It encourages you to check your browser extensions. Perhaps these are interfering with the Gmail and due to this conflict, Gmail won’t load. You can either turn off these extensions and plug-ins temporarily or make use of the incognito mode of the browser where there are no such things like extensions and plug-ins.

Problem 4: Gmail can’t send or receive

Gmail also gives you problem in sending or receive mails and messages. And to troubleshoot such issue, following are the solutions mentioned.

Check the Latest Version of Gmail

This issue is likely to emerge when you are using an outdated version of Gmail. And therefore, the first solution says you to check if the Gmail update is available. You can go to the Play Store and from the “My apps & games” option, you can see if Gmail needs to be updated or not.

Verify Internet Connection

Another thing that carries weight while you can send or receive mails is the internet connection. As we all know that Gmail won’t respond if the Tecno Spark 10 4G device is not connected to the internet. Therefore, you are advised to turn off Wi-Fi and then enable it again. Also, please ensure to switch to Wi-Fi if you are using the cellular data. This may hamper the process and stop you from receiving or sending mails.

Remove you Account and Add Again

If still Gmail keeps stopping you to go ahead, make sure to once sign out from it. To do this:

Open your Gmail app and go to “Manage accounts on this device”.
Now, tap on the account you are working with. Tap on “REMOVE ACCOUNT” thereafter. After this, you can again sign in and then check if the problem is gone or not.

Problem 5: Stuck in sending

Now, here is another annoying problem that doesn’t let Gmail working on Android properly. This problem addresses the situation where users send a mail but it gets stuck on sending. If this is the problem that you are going through, the following solutions will help you.

KoolReport Pro is an advanced solution for creating data reports and dashboards in PHP. Equipped with all extended packages , KoolReport Pro is able to connect to various datasources, perform advanced data analysis, construct stunning charts and graphs and export your beautiful work to PDF, Excel, JPG or other formats. Plus, it includes powerful built-in reports such as pivot report and drill-down report which will save your time in building ones.

It will help you to write dynamic data reports easily, to construct intuitive dashboards or to build a whole business intelligence cockpit.

KoolReport Pro package goes with Full Source Code, Royal Free, ONE (1) Year Priority Support, ONE (1) Year Free Upgrade and 30-Days Money Back Guarantee.

Developer License allows Single Developer to create Unlimited Reports, deploy on Unlimited Servers and able deliver the work to Unlimited Clients.

Try Alternative Gmail Address

First of all, if Gmail is not working due to stuck in sending issue, we advise you to make use of some other Gmail address to send the mail. If the problem still occurs, jump to the next solution.

Check Network Connection

As already mentioned, be sure of an active internet connection while working with Gmail. When you are not using a stable connection, it may lead to stuck on sending, Gmail crashing and many other issues. You can fix the issue by doing these three things:

Most importantly, use only Wi-Fi rather than cellular data if you want a smoother process.
Turn off Wi-Fi and then turn it on again after nearly 5 seconds. Do the same with the router. Plug it out and the plug in.
Lastly, turn on Airplane mode and after a few seconds, turn it off again.

Now try to send the mail and see if things are still the same or not.

Check Attachments

Large attachments can also be the reason for this issue. We would here like to suggest you to check the attachments you are sending. If these are not so important, you can remove them and send the mail. Or if it is not possible to send the mail without attachments, compressing the files can be a solution.

Problem 6: “Account not synced” issue

Many times, the users get the error that says “Account not synced” while they try to work with Gmail. And this is the 6^th problem we are introducing. The ways mentioned below will assist to get out of the trouble.

Make Space in the Phone

When Gmail stops to further the process by prompting “Accounts not synced” issue, be sure that your Tecno Spark 10 4G has some storage in it. If not, create it straight away. As we also mentioned in one of the above solutions, you can either delete the unnecessary files or transfer the important files to the PC to make the space in the phone. Go along with this tip and see if it works.

Check Gmail Sync Settings

As another solution, check Gmail sync settings to get the issue fixed.

Simply open Gmail and hit the menu icon which is three horizontal lines on the top.
Go to “Settings” and choose your account.
See the tiny box beside “Sync Gmail” and check it if it is not.

Restart the Tecno Spark 10 4G device

If the above method went futile, simply restart your device. Take help of the Power button on your device. Long press it and from the options, restart it. This will hopefully work for you.

Problem 7: Gmail app running slow

The last problem that you may face is the slow-going Gmail app. In simple words, you may experience that Gmail app is operating extremely slowly. To fix this, following solutions will help you.

Restart the Phone

It is a universal method to fix minor Android system issues. And here too, we would like you to restart your Tecno Spark 10 4G in the first place when you find that Gmail is not responding due to the sluggish behavior.

Clear Storage of Device

Usually all the apps start running slow when the Tecno Spark 10 4G device is not having sufficient space. As the apps need space to function quickly and appropriately, having the Tecno Spark 10 4G device on low storage can prove to be a bad luck for Gmail. So, make sure you wipe out the items you no longer needed on your device and create some room so that the Gmail responds nicely and won’t be running slow anymore.

Update Gmail App

As the last tip that will indeed help you is to update the Gmail app. Until you update the app when required, Gmail keeps stopping you from working and you will definitely get frustrated. Therefore, go to Play Store and look for the Gmail update. If it is available, welcome it with smile and bid farewell to the problem of slow running Gmail.

What if your problem still doesn’t get resolved after following these 3 tips? Well! If that is the case, we will again recommend you to make use of an expert one-click tool to flash the stock Android ROM.

Dr.Fone - System Repair (Android) is going to help you serving the purpose. This mighty tool possesses huge success rate and one can rely on it for its simplicity and security. It is designed to work with numerous problem related to Android system. So, no matter if your Gmail keeps crashing or keeps stopping, it has the solution for everything.

Dr.Fone - System Repair

Fix all Gmail issues caused by Android system:

Gmail app corruption or not opening
Gmail app crashing or stopping
Gmail app not responding

Change Location

How to Fix Android App Not Installed Error on Tecno Spark 10 4G Quickly? | Dr.fone