Reasons why Pokémon GPS does not Work On Vivo Y78+?

There are several reasons for which Pokémon GPS does not work. Whether you are an android or iPhone user the issue remains and this means that you need to take precautionary steps. Some reasons for the issue are as follows:

1. The GPS radio of your android or iOS device is not working or has malfunctioned. These radios have been improved over time but there is still a long way to go.
2. The location of the player also matters a lot. If you are indoors then there is a possibility that you are getting into issues and not receiving GPS signals in full and this is all because of the poor connectivity and signal strength.

Part 1: 3 Ways to fix Pokémon GPS not working on iOS devices

For iOS devices, many issues can be faced by users. This is because the GPS signals might not work perfectly with the iOS device as well. There are several ways to fix the issue and this section will deal with all of these ways to make the process easy for you.

Fixture 1: Turning on Wi-Fi

There is a possibility that the Wi-Fi is not working and this is the main reason that Pokémon Go gets you in trouble. To get the issue resolved it is advised to swipe down the command center and tap on the Wi-Fi signal icon to make sure that it is highlighted. Swipe up to check the game again.

Fixture 2: Reload the game

This is another important aspect that should be taken care of if the Pokémon Go GPS not working. Reloading the game makes sure that it is refreshed and this also leads to issue fixture when it comes to GPS signals. Do this by simply pressing the home button and returning to the home screen. Open a new application or do something else for the moment. Enter the multitasking screen by double-pressing the home screen button. Swipe to the Pokémon Go card and reenter the game.

Fixture 3: Restart the Phone

Press and hold the volume button and the side button. The power off slider appears, just wait for 30 seconds for the Vivo Y78+ device to restart. In most cases restarting the Vivo Y78+ device will get the issue of GPS not working Pokémon go iPhone resolved.

Part 2: The best GPS Spoofer to be used

Dr. Fone Virtual location is the best and the most used GPS spoofer that will make your life easy when it comes to Pokémon Go. The program is the best and it also makes sure that the GPS related issues are resolved with care and perfection. With the best technology and professional development, this program has been at the forefront of GPS spoofing. If the GPS signal not working then it is advised to make sure that Dr. Fone is used to get the work done with ease. There are several features of the program that will make sure that you get a step ahead of your Pokémon Go competitors.

How to use Dr. Fone Virtual Location

The process that you need to follow is mentioned as follows.

Step 1: Install the Program

Download the exe file and install the program, to begin with, the process.

Step 2: Virtual Location Enablement

Connect the iPhone with the system and click on the button that states get started to enable the virtual location.

Step 3: Device Location

The center on button is there on the program. Press it and the program will detect the location on your device.

Step 4: Changing Location

For teleportation press the third button on the upper right corner. Also, type the name of the location where you want to teleport in the bar.

Step 5: Movement to the teleport

Press the move here button to move to the teleported location that has been selected.

Step 6: Validate the Location

The location will be locked on the iPhone and it will display the same location as on the program. This also completes the process in full.

Part 3: 3 Ways to fix Pokémon GPS not working on Android devices

The android devices might also get into an issue that is under discussion. To make sure that the problem is fixed it is advised to follow the 3 most important ways that are discussed in this section.

Method 1: Turn on Location Services

Swipe down to access the notification panel of the program. Make sure that the location button is click. This is to be done if the location is not highlighted already. The GPS satellite will be able to detect the pinpoint location of the player and this will resolve the problem.

Method 2: Restart the Vivo Y78+ device

This is another important way to get the GPS signal as it will refresh the phone. Just long-press the power button and select the option of restart from the screen that appears.

Method 3: Update the Application

This is another important aspect. There are auto-updates disabled by some users and this can lead to a problem if the application is not updated. To avoid this scenario it is advised not to update just the Pokémon Go app but every application to overcome the issue in full. Just visit Play store > my apps and games > update all.

Conclusion

The Dr. Fone Virtual location is the best and the most advanced program that can be used to make sure that location spoofing is made easy. The program is not only easy to use but it has been developed to get the players the best location services that they want. For all the location and AR-based games, it is advised to use this program as it will overcome all sorts of issues. With Dr. Fone’s virtual location it is easy to make sure that the location is spoofed for iOS that does not let it do otherwise. Dr. Fone will not only get you the lifetime of updates but will also ensure that you get the best results with respect to location.

How and Where to Find a Shiny Stone Pokémon For Vivo Y78+?

Shiny Stone Pokémon is an important evolution item in Pokémon Sword and Shield. If you are a Pokémon player, you understand how great it is to capture a Shiny Stone. However, the Shiny Stone is a rare item, and you will have to put more work to grab one. In this article, we will to explain to you everything you ought to know about Shiny Stone Pokémon, including how to get them with less effort. Let’s get started.

Part 1. Shiny Stone Pokémon

What is Shiny Stone Evolution?

A Shiny Stone is an item in Pokémon Go that is used to evolve certain Pokémon. Shiny Stone was introduced in Generation IV and is no different from other evolution stones such as dusk stones, dawn stone, and ice stone, to mention but a few. The major differences could be their location as well as the type of Pokémon they help to evolve. You can identify this peculiar stone by its dazzling, shining light.

How and where to find a Shiny Stone evolution

In Pokémon Sword and Shield, the easiest way to get any evolution stone, including Shiny Stone, is by completing poke jobs. When you earn a water badge and then the gym badge, you can access the third tier poke jobs. Everything further will depend on whether your Pokémon perform great in their assigned jobs. If it performs great, you will be rewarded with an evolution stone that could be a Shiny Stone. If you want your Pokémon to do a great job, make sure you meticulously read through the summary of every given poke job. This is vital because it provides you a clue of what Pokémon you should pick.

Shiny Stone Evolution

In Pokémon Go, Shiny Stone is used to evolve certain Pokémon species. The following are some of the Pokémon that evolve using Shiny Stone. Evolving them is pretty simple. Just launch the menu and navigate to the bag. Select the “Other items” tab and use it to evolve any of the Pokémon listed below.

1. Roselia

Roselia is small, light green in color grass and poison type Pokémon. It has stats of 50 hp, 60 attacks, 65 speed, and 45 defense. This Pokémon was introduced in Generation III and had three thorns on its head and black eyes with long eyelashes. It holds a rose on the one hand and a red one on the other hand. Its aroma draws serenity, but the thorns on its head contain poison. The healthier it is, the stronger its aroma is. This Pokémon evolves from Budew through friendship level up in the day. When it is subjected to a Shiny Stone, it evolves into Roserade.

2. Minccino

This is a normal type of Pokémon that was introduced in Generation 5. It is also referred to as Chinchilla Pokémon. Its abilities include cute charm, technician, and skill link. Its stats are hp-55, attack-50, defence-40, speed-75, and total combat points-75. A Minccino evolves into a Cincino using a Shiny Stone. In Pokémon Sword and Shield, Minccino is located in rolling fields, East Lake Axewell, Route 5, and Giant’s cap.

3. Togetic

Togetic is a fairy and flying type of Pokémon that has ten hatch cycles. Its abilities include hustle, serene grace, and super luck. Togetic itself evolves from Togepi with leveled up friendship through camp play and cooking curry. It can float in midair without having to flip it wings. It appears and showers happiness to kindhearted and caring people. It, however, becomes dispirited if it encounters people who aren’t kind. Togetic is located in Stony Wilderness and from an evolving Togepi. Togetic evolves to Togekiss with the help of a Shiny Stone.

Part 2. Tricks and Hacks to Find Shiny Stone Pokémon

Finding a Shiny Stone in Pokémon Sword and Shield is challenging because it is a rare item. Nevertheless, some hacks and tricks can reduce your curve of finding a Shiny Stone, as explained below.

1. Use the iOS spoofing tool-Dr. Fone Virtual Location

Since the game of Pokémon is location-based, you can fake your GPS location by simply teleporting to an appropriate Shiny Stone location while you are seated at your home. This is achievable with the help of Dr. Fone Virtual Location . The program is powerful, simple, and easy to use. You can teleport to whatever place you want, simulate movements along a route set by two or multiple points. To teleport to the location where it is easier to grab a Shiny Stone using Dr. Fone Virtual Location, follow the steps below.

Step 1. Download and install Dr. Fone Virtual Location on your computer. Now run it and click on the “Virtual Location” tab.

Step 2. After that, connect your iOS to the PC and click the “Get Started” button.

Step 3. On the next page, click the third icon on the top-right to provide the teleport mode. Choose the location you want to teleport to within the filed at the top and press “Go.”

Step 4. Click “Move Here” on the dialog box that pops up once the program finds the location.

2. Use Android spoofing tool- Pgsharp

Pgsharp i8s an Android application that enables users to be fake their GPS location and fools location-based apps like Pokémon Go to enter a territory that is easy to grab a Shiny Stone or Pokémon. It has a joystick feature for easy and smooth movement, coordinates to move to specific locations, auto walkthrough several pokestops, and saves your last location, among others.

3. Use a Drone

Some YouTube channels teach you how to use drones to cheat in Pokémon Go. A good example of a drone is DJI PantomDrone. When this drone is integrated with some smart software, you can easily control a phone that is attached to the drone. This way, you can sit at home while visiting gyms and pokestops.

How to get the dragon scale and evolution-enabled pokemon On Vivo Y78+?

The Dragon Scale is a special item in Pokémon Go that is used to evolve Seadra into Kingdra. To get a Dragon Scale in the game, you need to complete the 7-day Research Breakthrough. This means that you need to complete a Field Research task every day for 7 days to get the Dragon Scale. Once you have the Dragon Scale, you can use it to evolve Seadra into Kingdra.

Dragon scales in Pokémon GO are extremely exceptional and are utterly crucial in evolving pokemon. Pokemon go dragon scale evolutions can be as easy as utilizing the necessary amount of candy, but frequently scarce evolutions will call for an evolution object. These are usable that not only let you fill in your Pokedex but also gain access to many impactful beasts. There are several different ways to get a Dragon Scale, but none of them is guaranteed. This implies that you will have to accomplish as many of these tasks that are feasible – peculiarly because you can make use of them only once. Perhaps the simplest way of gaining a Dragon Scale is spinning Pokestops wherever likely. Each Pokestop comes up with a 1% probability of an evolution object, encompassing a Dragon Scale.

Following are the additional evolution items observed in Pokémon Go:

• King’s Rock
• Metal Coat
• Sinnoh Stone
• Sun Stone
• Unova Stone
• Upgrade

Part 1：What Pokémon can I evolve with a dragon scale on Pokémon Go?

The pokemon go dragon scale is one of the new evolution objects that can be employed in association with Pokemon Candy to evolve some of the generation 1 Pokemon to new generation 2 evolutions. The dragon scale is extremely strong and rigid. We can only make use of our Dragon Scale on a specific Pokemon. Dragon scale pokemon go evolutions contain the alteration of Seadra into Kingdra by combining the dragon scale along with 100 Horsea candies - making Kingdra a sturdy pocket monster ideal for raids and taking charge over the gyms.

Once receiving a Dragon Scale, a player can only use it to evolve Seadra. Any other Pokemon will not evolve with it or even need it to evolve.

Part 2：Fast way to get the exclusive Pokémon?

You can make use of the artificial locality of Dr. Fone to imitate your position without any motion and acquire exclusive Pokémon. The duplicate point of Dr. Fone lets you phony your orientation and permits your mobile application to presume that you are chosen in the app interface of Dr. Fone without being banned from the game or getting detected by the developers of Pokemon Go. To seize the pokemon, you can trail the instructions below with one click without having to go anywhere else.

Step 1: Replicating Position Fluke:

Pokemon Go can be played without requiring movement, using Dr. Fone’s toolkit. To replicate the position and guarantee that the iOS gadget is associated with the application, open the Virtual Location property using a functioning lightning cable.

You can click the ‘Get Started’ button to initiate the action as soon as your phone gets detected.

Step 2: Mirroring Motion amid steps:

Unfold the top right area of the initial option before reaching Dr. Fone’s GUI, which permits you to imitate maneuver amid the two spots. Pick the positioning pin and click on the ‘transfer here’ button in the search bar.

To begin the replication, you will be required to make a movement and traverse the ‘March’ button to reach it multiple times. By default, the action is set to one but can be outweighed by the user, and the plan will change correspondingly.

The change location will act as genuine for the Pokémon Go application, and it will presume that the player is moving in between the two points you chose on the Dr. Fone GUI screen. At the foot of the screen, the rate of motion can also be modified, making use of the gliding menu. By following these steps, you can use the fake motion of the position of Dr. Virtual Fone without needing to understand it, and your app will not be banned.

Step 3: Movement Simulation between more than two spots:

Dr. Fone’s application also lets you fake your motion joining more than two positions. The attribute is called after the multi-stop path that can be highlighted from the GUI toolbox class situated at the top-right position, which allows you to release several accurate endpoints on the map, and your position will take action correspondingly as managed by the virtual position application of Dr. Fone.

To let the system duplicate flow by choosing the accurate choices, press the ‘March’ button. You will have to do the Pokémon Go walking trick at some point. Dr. Fone’s virtual motion replicator application makes your life a lot easier and lets you do the job without having to worry about travel charges.

Part 3: How to get the dragon scale on Pokémon Go?

Pokemon go dragon scale can be obtained by taking charge of Gyms and spinning, waiting for the Pokestops to give you free dragon scales, but the chances are extremely low. PokeStops are symbolized by little blue box images on the map and usually can be observed in places of recreation such as a train station, a landmark, or even a regional post office. When your avatar is near to entering a PokeStop, the blue box image changes into a disc shape. The next thing you need to do is tap the disc, and it will exhibit a picture of the landmark, which is a chance to get a few free products.

You can get your hands on a dragon scale by spinning a specific Pokestop seven days in a row to get the required streak bonus. This won’t ensure you a dragon scale; however, it will give you the possibility of achieving other evolutionary objects such as the Sun Stone, Upgrade, Sinnoh Stone, Unova Stone, Metal Coat, and King’s Rock.

Conclusion

Specific Pokémon in Pokémon GO now call for rare evolution items such as a steel coat, a sunstone, a king’s rock, a dragon scale, or an upgrade to evolve, all of which are unplanned drops from Pokestops. However, the players can make use of Dr.Fone - Virtual Location application to gain version exclusive Pokemon and evolution items and make advancements in the game.

Also read: