Reasons why Pokémon GPS does not Work On Vivo Y100A?

There are several reasons for which Pokémon GPS does not work. Whether you are an android or iPhone user the issue remains and this means that you need to take precautionary steps. Some reasons for the issue are as follows:

1. The GPS radio of your android or iOS device is not working or has malfunctioned. These radios have been improved over time but there is still a long way to go.
2. The location of the player also matters a lot. If you are indoors then there is a possibility that you are getting into issues and not receiving GPS signals in full and this is all because of the poor connectivity and signal strength.

Part 1: 3 Ways to fix Pokémon GPS not working on iOS devices

For iOS devices, many issues can be faced by users. This is because the GPS signals might not work perfectly with the iOS device as well. There are several ways to fix the issue and this section will deal with all of these ways to make the process easy for you.

Fixture 1: Turning on Wi-Fi

There is a possibility that the Wi-Fi is not working and this is the main reason that Pokémon Go gets you in trouble. To get the issue resolved it is advised to swipe down the command center and tap on the Wi-Fi signal icon to make sure that it is highlighted. Swipe up to check the game again.

Fixture 2: Reload the game

This is another important aspect that should be taken care of if the Pokémon Go GPS not working. Reloading the game makes sure that it is refreshed and this also leads to issue fixture when it comes to GPS signals. Do this by simply pressing the home button and returning to the home screen. Open a new application or do something else for the moment. Enter the multitasking screen by double-pressing the home screen button. Swipe to the Pokémon Go card and reenter the game.

Fixture 3: Restart the Phone

Press and hold the volume button and the side button. The power off slider appears, just wait for 30 seconds for the Vivo Y100A device to restart. In most cases restarting the Vivo Y100A device will get the issue of GPS not working Pokémon go iPhone resolved.

Part 2: The best GPS Spoofer to be used

Dr. Fone Virtual location is the best and the most used GPS spoofer that will make your life easy when it comes to Pokémon Go. The program is the best and it also makes sure that the GPS related issues are resolved with care and perfection. With the best technology and professional development, this program has been at the forefront of GPS spoofing. If the GPS signal not working then it is advised to make sure that Dr. Fone is used to get the work done with ease. There are several features of the program that will make sure that you get a step ahead of your Pokémon Go competitors.

Power Tools add-on for Google Sheets, Lifetime subscription

How to use Dr. Fone Virtual Location

The process that you need to follow is mentioned as follows.

Step 1: Install the Program

Download the exe file and install the program, to begin with, the process.

vMix 4K - Software based live production. vMix 4K includes everything in vMix HD plus 4K support, PTZ control, External/Fullscreen output, 4 Virtual Outputs, 1 Replay, 4 vMix Call, and 2 Recorders.
This bundle includes Studio 200 for vMix from Virtualsetworks, HTTP Matrix 1.0 automation scheduler, and 4 introductory training videos from the Udemy vMix Basic to Amazing course.

Step 2: Virtual Location Enablement

Connect the iPhone with the system and click on the button that states get started to enable the virtual location.

Step 3: Device Location

The center on button is there on the program. Press it and the program will detect the location on your device.

Step 4: Changing Location

For teleportation press the third button on the upper right corner. Also, type the name of the location where you want to teleport in the bar.

Step 5: Movement to the teleport

Press the move here button to move to the teleported location that has been selected.

Step 6: Validate the Location

The location will be locked on the iPhone and it will display the same location as on the program. This also completes the process in full.

Part 3: 3 Ways to fix Pokémon GPS not working on Android devices

The android devices might also get into an issue that is under discussion. To make sure that the problem is fixed it is advised to follow the 3 most important ways that are discussed in this section.

Method 1: Turn on Location Services

Swipe down to access the notification panel of the program. Make sure that the location button is click. This is to be done if the location is not highlighted already. The GPS satellite will be able to detect the pinpoint location of the player and this will resolve the problem.

Method 2: Restart the Vivo Y100A device

This is another important way to get the GPS signal as it will refresh the phone. Just long-press the power button and select the option of restart from the screen that appears.

Method 3: Update the Application

This is another important aspect. There are auto-updates disabled by some users and this can lead to a problem if the application is not updated. To avoid this scenario it is advised not to update just the Pokémon Go app but every application to overcome the issue in full. Just visit Play store > my apps and games > update all.

SwifDoo PDF 2-Year Plan

Conclusion

The Dr. Fone Virtual location is the best and the most advanced program that can be used to make sure that location spoofing is made easy. The program is not only easy to use but it has been developed to get the players the best location services that they want. For all the location and AR-based games, it is advised to use this program as it will overcome all sorts of issues. With Dr. Fone’s virtual location it is easy to make sure that the location is spoofed for iOS that does not let it do otherwise. Dr. Fone will not only get you the lifetime of updates but will also ensure that you get the best results with respect to location.

The Ultimate Guide to Get the Rare Candy on Pokemon Go Fire Red On Vivo Y100A

In all Pokemon Go versions, a Rare Candy will automatically uplift you to the next level. These cadies are powerful and come with a lot of extra rewards. That said they are also very difficult to find, especially in Pokemon Fire Red. This article will show you some of the ways in which you can find Rare Cady, and level up quickly to improve your status in the game.

Part 1: What is the rare candy in Pokémon Go Fire Red?

All Pokemon Go game variations have Rare Candy, and they are mainly used to upgrade the level of any Pokemon by 1. If you were at level 9, you automatically go up to level 10, etc. This will save you from having to engage in battles to raise your level. You may also earn the level attacks that you would have earned at that level, even without having to fight.

There are a limited number of Rare Candy in Pokemon Go Fire Red. However, you can get unlimited Rare Candies by using Pokemon Go Fire Red Rare Candy cheat codes through GameShark or Action Replay. You may also get them through cloning your existing Rare Cady.

When you use a Rare Candy, you get enough Exp. Points to move to the next level. This means that it is best to use them for getting to the next level, especially when it becomes too challenging. Although you get to the next level, you will not earn any Effort Value Points, which will make your Pokemon weaker than it would have been if you had leveled up through training.

Part 2: How to get rare candy in Pokemon Go Fire Red?

There are three main ways in which you can get Rare Candy in Pokemon Go Fire Red. The first one is using a location spoofer to catch rare candy without moving. The second one involves going to areas where you can find the Rare Cady and the last one involves using a Fire Red Rare Candy Code.

Getting Pokémon GO Fire Red Rare Candy without Walking/Moving

Searching for the simplest way to collect rare candies in Pokémon GO? If your answer is affirmative, there is good news: We have the perfect tool for you. Wondershare Dr.Fone - Virtual Location allows you to play Pokémon GO from the comfort of your house. You no longer need to walk miles to visit gyms and PokéStops or hatch eggs.

All of this can be done without even moving from your bed. Dr.Fone – Virtual Location facilitates you in mimicking realistic movements of the map to play Pokémon GO. To make this process easier for you, there is also a joystick included in the tool to help you simulate movement. Furthermore, it comes with pre-built functions such as a one-stop route and muti-stop route to further help you.

Notable Characteristics of Dr.Fone - Virtual Location

1. Not only can you follow the routes on the map, but you can also import and export route files.
2. There is no need to jailbreak your iOS device to spoof location when using Dr.Fone - Virtual Location.
3. When spoofing your location on iOS devices, Dr.Fone supports up to 5 devices from a single Mac or PC.

Instructions for Getting Pokémon GO Fire Red Rare Candy Without Walking/Moving

Dr.Fone - Virtual Location offers a simple and easy-to-understand way to spoof your location when playing Pokémon GO. The following are the steps you need to follow for location spoofing:

Step 1: Connect to Dr.Fone - Virtual Location and Set Target Location

With Dr.Fone - Virtual Location launched on your computer, connect your smartphone. Once on the map screen, click the “Teleport Mode” icon, the first one, from the toolbar near the top-right corner. Now tap the search bar on the top left corner, enter the targeted location, and press “Enter.”

Step 2: Teleport to Targeted Location

The cursor on the map screen will move to the location you have entered on the map. If you want to move there when spoofing your location, click “Move Here.” It will change the location on the map screen and on your device to the location you entered. You can confirm it by accessing your smartphone and opening a map application.

Step 3: Simulate Movement and Configure Route

To simulate movement when spoofing your location, you can select either “One-Stop Route” or “Multi-Stop Route.” Both are the third and fourth options, respectively, on the toolbar near the top right corner. Now, choose the stop points, type of trip, walking speed, and other parameters. Once you are done, tap “Move Here” or “Start Moving” to initiate the movement.

Getting Pokemon Go Fire Red Rare Candy Normally

You would have to visit certain locations in order to get Pokemon Go Rare Candy in the normal way. The locations which have been found to give most Rare Candy are:

• Take a look behind the house in Cerulean City
• Go to Mount Moon and get one
• Check at the Rocket Game corner
• Take a journey to the Ghost Tower
• When you get to the Safari Zone Warden’s House, check behind the boulder.
• You may also use Meowth or any other Pokemon that has Pickup abilities and try your luck.

Getting Pokémon Go Fire Red Rare Candy with cheat codes

The best way to go about this is to use a Pokemon Go Fire Red emulator on your computer and then use the fire red chat code shown below and follow the simple instructions.

Look for the Pokemon Go Fire Red codes posted on various user sites.

Use GameShark or My Boy game emulator to install the codes and then get the Rare Candy that you need.

The cheat code for Pokemon Go Fire Red Candy is:

Part 3: How do you get unlimited rare candies in Pokemon Red?

Sometimes, you don’t want to keep adding Pokémon Go Fire Red Rare candy codes one at a time. You simply want to Master Code that will help you get the Rare Candy whenever you need them.

This is how you go about getting unlimited Rare Candy on Pokemon Go Fire Red.

82025840 0044

It can be used to get a single Rare Candy or to unlimited Rare Candy as shown below:

Pokemon Go Cheat Code for Unlimited Rare Candies

82025840 0044

How to use the code:

Step 1 – Turn off or delete any other code that you may have stored.

Step 2 – go to a Pokéstop and then save your game.

Step 3 – create a new cheat as follows;

• Code Name: Rare Candy
• Code Type: CodeBreaker
• Code: 820258400044

Wait for it to be activated and then save it.

Step 4 – Enter the Pokéstop and deactivate the cheat code.

Step 5 – Go to your computer and type in “PC > Item Storage”.

Step 6 – Withdraw a SINGLE Rare Candy

Step 7 – check if you have double Rare Candy entries in your storage. If they are not duplicated, then the cheat has worked as it should. If they are duplicated, then you have to close the game and redo all the steps above.

Step 8 – Now exit and then go back to your Item Storage, where you can withdraw as many Pokemon Go Fire Red Rare Candies as you would want. Simply pick a number between 001 and 999, but never use the down arrow.

In conclusion

Getting Rare Candy in Pokemon Go Fire Red is a difficult task. These cadies are not easy to find and they may not be in a location that you can access easily. The article shows you the locations at which you can collect Pokemon Go Fire Red Candy using the normal gameplay. You may also use Pokemon Go GameShark cheat codes and get unlimited Rare Candy to use whenever you need them.

What Pokémon Evolve with A Dawn Stone For Vivo Y100A?

If you are a diehard Pokémon Go player, you probably know how exciting it is when your Pokémon evolves. Evolutions mean a boost in stats and strength in raids. Plenty of Pokémon users are conversant with the traditional raiding as a way to evolve. However, you can use special items to evolve your Pokémon. One such item is the dawn stone. In this article, we are going to take you through a detailed guide on dawn stone evolutions and how to get it with ease.

Part 1. Dawn Stone Pokémon Evolutions

What is Dawn Stone in Pokémon Sword and Shield?

Like Shiny Stone, dusk stone, Sun Stone, and Moon Stone, Dawn Stone is another peculiar evolution item in Pokémon Sword and Shield. If you combine Dawn Stone with certain Pokémon, they will evolve to another level. This peculiar stone was introduced in Generation IV, and in terms of appearance, Dawn Stone sparkles like a glittering eye.

You can get dawn stone from the Digging Duo found near the Wild Area nursery. You will, however, be required to pay them 500 watts before digging random items for you. Remember, this is a trial and error thing, and you might have to spend a lot of watts before finding a dawn stone. Also, you can get any evolutionary stone, including the Dawn Stone in the Lake of Outrage. Here, you will have to first obtain a Rotom Bike on route 9 to move across the water.

Pokémon that Evolve with Dawn Stone

As aforementioned, dawn stone is an evolution item that is used to evolve certain species of Pokémon. To evolve your Pokémon using Dawn Stone in Pokémon Sword and Shield, enter the bag menu and choose the “Other Items” tab. Hover on the Dawn Stone and select the “Use this item” option. Finally, select the Pokémon to evolve. These Pokémon that can be evolved using dawn stone include:

1. Kirlia

Kirlia is a small humanoid Pokémon whose upper body and arms are white while the waist and legs are light green. This makes it appear as though it is wearing tights. Kirlia’s natural abilities include synchronization and trace. It loves dancing on sunny mornings and becomes more beautiful when they sense e positive emotions of trainers. A vast majority of Kirlia live in the cities, although some are still found in the forest. Kirlia evolved from Ralts and has two possible evolutions, namely Gardevoir and Gallade. If it reaches level 30, it evolves to Gardevoir. However, if it is male and given a dawn stone, it will evolve to Gallade.

2. Snorunt

Snorunt is an ice-type Pokémon that was introduced in Generation III. It is also referred to as the “Snow Hat Pokémon.” You can find Snorunt in seafoam café, snow canyon, or even in Mysterious Grotto. Furthermore, you can obtain it by trading or Pokémon Roulette. Snorunt can evolve into Glalie or Froslass. If it reaches level 42, Snorunt evolves to Glalie. For Snorunt to evolve into Froslass, it requires a dawn stone. However, the Snorunt must be a female to evolve to Froslass.

WonderFox DVD Ripper Pro

Part 2. Hacks and Tricks to get Dawn Stone Pokémon

It is every player’s wish to avoid the long hunt for a Dawn Stone into their Podex. This issue has given birth to some of the hacks and tricks to help players cross territory and find the intended evolution item or Pokémon. Some of these tricks include:

1. Use iOS spoofing tool- Dr. Fone Virtual Location

Dr. Fone Virtual Location is an amazing iOS spoofer tool that allows users to fake their actual location. This makes it a good tool for location-based games like Pokémon Go. With Dr. Fone Virtual Location, you can teleport to whichever place across the globe by a click of a button. If you want to simulate movements to confuse the game app, you can simulate two or multiple points. Furthermore, you can leverage the joystick to improve the flexibility of GPS control. To teleport to any place in the world with Dr. Fone Virtual Location’s help, follow the steps below.

Step 1. Download Dr. Fone Virtual Location and install it on your computer. Once installed, launch it and then select the “Virtual Location” tab on the primary window. Also, connect your iOS device to the computer.

Step 2. On the next page, click the “Get Started” button to proceed.

Step 3. You should see three icons on the top-right of the subsequent page. Click the third icon to switch to the teleport mode. At the top-left, enter the location of the place you want to teleport to and click “Go.”

Step 4. When the program has found the location, a dialog box will appear in the background. Click “Move Here” to teleport to this location.

2. Use Pokémon Gotcha

Pokémon Go-tcha makes hunting Pokémon and evolution items much easier. With this tool, you can go for a hunt without looking at your smartphone. When you run Go-tcha Evolve on the Pokémon Go application, you can set color animations and vibrations to alert you about Pokémon and pokestops that are in range. Moreover, you can use the auto-catch feature so that you don’t have to respond to alerts. You can also check on time, your stats, and leverage the new pedometer feature to count your steps. This program comes with various exciting colors for you to choose from and a bunch of other great features.

3. Use iTools

iTools location spoofer is another good GPS mocking tool that is suitable for Pokémon Go games. By faking the GPS location, you can easily access territories where rare Pokémon or evolution items are available while seated at home or in the office. This program supports iOS 12 devices or earlier versions. However, there are scores of people who have complained about several crashes. Nevertheless, you can try it if you have got some penny to spare.