Here are Some Pro Tips for Pokemon Go PvP Battles On Vivo S18 Pro

“How to plan the PvP Pokemon matches and are there some strategies that I need to implement in the PoGo PvP battles?”

Ever since the Pokemon Go PvP mode has been introduced by Nintendo, there has been a lot of confusion among the players. Ideally, you can partake in a Pokemon PvP battle locally or remotely. It is a 3 vs. 3 battle in which you have to select your best Pokemons to fight with other trainers. To help you become a PvP Poke master, I have come up with this detailed guide that will certainly come in handy.

Part 1: Pro Strategies to Follow in PvP Pokemon Go Battles

If you want to be good at the Pokemon Go PvP battles, then you must understand how the game works. Once you are ready, I would recommend some of these Pokemon PvP strategies that are followed by pro players.

SwifDoo PDF 2-Year Plan

Tip 1: Start from the low leagues

As you know, there are three different leagues to participate in Pokemon Go PvP battles. If you are a beginner or don’t have too many Pokemons, then you should start from the lower categories and gradually climb your way up. You can find these three categories in the PoGo PVP mode:

• Great League: Max 1500 CP (per Pokemon)
• Ultra League: Max 2500 CP (per Pokemon)
• Master League: No CP limit

The Master Leagues is mostly reserved for pro players since there is no CP limit for Pokemons. The Great League is the best category to learn and try different Pokemon combinations.

Tip 2: Master all the Battle Moves

Ideally, there are four different moves in any PvP Poke battle that you must master. The more battles you partake in, the better you would become.

• Fast attacks: These are the basic attacks that are done more frequently than others.
• Charge attack: Once your Pokemon has enough energy, you can do a charge attack that would do more damage.
• Shield: This would shield your Pokemon from the enemy attacks. In the starting, you would only get 2 shields per battle.
• Swapping: Since you get 3 Pokemons, don’t forget to swap them during the battle. You can only swap Pokemons once in every 60 seconds.

Tip 3: Check your Opponent’s Pokemons

This has to be the most important thing that you should check before you start any Pokemon Go PvP battle. Right before starting the battle, you can check a list of the prospective opponents in your league. You can have a glimpse of their main Pokemons and pick your Pokemons accordingly so that you can counter their picks.

Tip 4: Know the current Meta

In nutshell, Meta Pokemons are the ones that are considered superior to other picks since they are more powerful. You might already know that some Pokemons are just stronger than others. Since Nintendo keeps balancing Pokemons with constant nerfs and buffs, you should do some research in advance.

There are several sources like the Silph Arena, PvPoke, and Pokebattler that you can check to know the current meta Pokemons.

Tip 5: Shield Baiting Strategy

This is one of the most effective Pokemon Go PvP strategies that you must try. You might already know that there are two kinds of charged attacks a Pokemon can do (mild and strong). During the battle, you need to first poke your enemy and have enough energy for both moves.

Now, instead of going with your ultimate attack, only perform the mild one. Your opponent might assume that you are going for an ultimate and would use their shield instead. Once their shield is used, you can go for a stronger attack to win.

Tip 6: Learn to Counter Fast Moves

To make the most of your shield and energy levels, you should learn how to counter moves. The first way to do this is by picking your Pokemons wisely. Your Pokemon would automatically get less damage if it can counter your opponent’s Pokemon.

During any PvP Poke battle, keep a count of your opponent’s moves to calculate when they would do a charged attack. Since you would only get 2 shields at the starting of the battle, make sure that you only use them at the time of need.

Tip 7: Sacrifice Swap

This might sound surprising, but sometimes we have to sacrifice a Pokemon in a fight to win the battle. For instance, you can consider sacrificing a Pokemon that is at low energy and won’t be of much help later.

In this way, you can swap it in the battle and let it take all the charge attack of your opponent. Once the Pokemon is sacrificed and has drained the opponent’s Pokemon, you can place another Pokemon to claim the victory.

Part 2: What Changes should be implemented in Pokemon Go PvP?

Even after the much-anticipated release of PoGo PvP, a lot of players are not satisfied with it. If Nintendo wants to improve Pokemon PvP and make their players happy, then the following changes should be made.

• The PvP Poke battles are based on the CP level of Pokemons instead of their IV levels, which is something most of the players dislike.
• Nintendo should focus on making the battles smoother as a lot of players encounter unwanted bugs and glitches.
• Apart from that, players also complain about unfair matchmaking in which pro players are often matched against beginners.
• The overall pool of Pokemons is not balanced – if a player has meta Pokemons then they can easily win the game.
• The PoGo PvP battles are more centric on the picks and less on the actual battle. Players would like more strategic moves and in-battle options to help them fight.

Part 3: How to Select the Best Pokemons for PvP Battles?

During any Pokemon PvP battle, the type of Pokemons you pick can either make or break the results. Firstly, consider the following things in mind before you start any PvP Poke battle.

• Team composition

Try to come up with a balanced team that would have both defensive and attacking Pokemons. Also, you should include Pokemons of different types in your team.

• Focus on attacks

Presently, some attacks like thunderbolt are considered extremely strong in PoGo PvP battles. You should get to know about all the major attacks of your Pokemons to pick the best ones.

• Consider Pokemon Stats

Most importantly, you should be aware of the defense, attack, IV, CP, and all the vital stats of your Pokemons to pick the best ones in the league of your choice. Besides that, you should also do some research about the Meta tier in Pokemon PvP to know the best picks of the present time.

Power Tools add-on for Google Sheets, 12-month subscription

Most of the experts consider the following points while picking any Pokemon in PvP battles.

• Lead

Firstly, focus on getting a Pokemon that can help you maintain a lead in the battle right from the start. You can consider getting Altaria, Deoxys, or Mantine as they are the strongest attackers.

• Attacker

If you want to fight more aggressively in the Pokemon PvP battle, then consider getting some attackers like Bastiodon, Medicham, and Whiscash.

• Defender

While making your Pokemon PvP team, make sure that you have at least one strong defender like Froslass, Zweilous, or Swampert.

• Closer

In the end, make sure that you have a perfect Pokemon that can end the battle and secure a win. Pokemons like Azymarill, Umbreon, and Skarmory are some of the best closers.

Part 4: Secrets about the new Mechanics in PvP Pokemon Go Battles

Lastly, if you want to level up in PvP Poke battles, then you should get to know about these three important mechanisms.

• Turns

Make sure that you keep an eye on the DTP and EPT values as they would indicate how much damage and energy is left. In the new mechanism, everything is about taking turns in 0.5 seconds. This will help you not only counter but also implement your moves before your opponent.

• Energy

You might already know that every Pokemon starts with 100-value energy. While switching Pokemons, make sure that you remember their energy value as that would be retained later on. The energy value of every Pokemon will also help you make a charged move in time.

• Switching

Switching is another strategic account in the new mechanism of Pokemon PvP battles in which we enter new Pokemons to the battle. Please note that the switching action has a 60-second cooldown window and you would only get 12 seconds to choose your next Pokemon.

There you go! I’m sure that after reading this post, you would be able to know every important thing about PvP Poke battles. From the meta Pokemons for PvP battles to essential mechanisms, I have listed it all in this guide. Now, it is time for you to implement these tips and become a Pokemon Go PvP champion in no time!

Which Pokémon can Evolve with a Moon Stone For Vivo S18 Pro?

Evolution items play a significant role in evolving certain species in the Pokémon game. Moon Stone is one of these peculiar items that are worth adding to your Pokedex. However, getting Moon Stone Pokémon is a tough assignment and you have to pull your best bells and whistles. However, there are several hacks and tricks that can reduce your hunting pain. In this article, we shall take you through a complete guide on Moon Stone Pokémon and evolutions.

Part 1. Moon Stone Pokémon

What is Moon Stone Pokémon?

Moon Stone is an evolution stone introduced in generation I. This peculiar stone is used to evolve certain species of Pokémon. In terms of appearance, Moon Stone Pokémon is elliptical and black as the night sky.

The simplest way to get a Moon Stone in Pokémon Sword and Shield is to go to Lake of Outrage in the Wild area. You will see a body of water on your left and a watt trader standing near it. To cross this water body, you will have to unlock the Rotom Bike from Route 9. When you manage this, check under the eight stones and you might be lucky that one of them might yield a Moon Stone. Also, you can navigate to the Dusty Bowl in the Wild Area. Here, you will find barren stones between a grassy rock and wheat field.

Pokémon that Evolve with a Moon Stone

Moon Stone makes certain species of Pokémon evolve. To evolve a Pokémon using Moon Stone in Pokémon Sword and Shield, simply open the bag and go to the “Other Items” section. Finally, use Moon Stone in any of the following Pokémon.

1. Nidorina

Nidorina is a poison type Pokémon that was introduced in Generation I. it looks like a rabbit with blue skin and dark spots around the body. Its natural abilities are poison point, rivalry, and hustle. As of level 16, Nidorona evolved from Nidoran. With the use of Moon Stone, Nidorina can evolve into Nidoqueen.

2. Nidorino

Nidorino is a male counterpart of Nidorina. This poison-type Pokémon debuted in Generation I and looks like a rabbit. It has a red-purple color with some dark spots spread across the body. Sharp teeth protrude with large upper jaws and spikes. This Pokémon is quick to anger. Nidorino evolved from Nidoran as of level 16 and can evolve to Nidoking using the Moon Stone.

3. Clefairy

This is a fairy-type Pokémon that was introduced in Generation I. It is a small, round, and star-shaped Pokémon whose abilities include magic guard and cute charm. It is timid and rarely feature near humans. Clefairy evolves from Cleffa when it gets leveled up with high friendship. With the help of Moon Stone, Clefairy evolves into Clefable.

4. Jigglypuff

This is a normal/fairy type of Pokémon that was also introduced in Generation I. Before Generation VI, this Pokémon was entirely a normal-type Pokémon. Jigglypuff itself is an evolution of Igglybuff and can evolve into Wigglytuff with the help of Moon Stone.

5. Skitty

This is a normal type Pokémon that was introduced in Generation II. This Pokémon is pink and looks like a cat with a cute charm ability. Skitty can evolve to Delcatty using the Moon Stone.

6. Munna

Munna is a psychic-type Pokémon that was introduced in Generation V. It is a small Pokémon with a pink round body having purple flower painting on its back. With the use of Moon Stone, Munna evolves into a Musharna.

PCDJ DEX 3 for Windows & MAC is the total entertainment DJ software solution, offering audio, video, and karaoke mixing ability. Automatic beat-sync, smart looping, 4 decks, DJ MIDI controller support, Karaoke Streaming and much more.
DEX 3 meets the demands of today’s versatile DJ, without compromise!
DEX 3 (Audio, Video and Karaoke Mixing Software for Windows/MAC | 3 Activations and Free Updates)

Part 2. Tricks and Hacks to Get Moon Stone Pokémon

As you have seen above, getting a Moon Stone is not an easy ride. It involves lots of trials and there is no guarantee to get it. But what tricks and hacks can you incorporate to make your hunt seamless? The following are some of the plausible tricks that you can use to easily grab a Moon Stone and add it to your Pokedex.

1. Use Dr. Fone Virtual iOS Location

It goes without question that Dr. Fone Virtual Location is the best location spoofer tool. Remember Pokémon game is location-based and if you can play around with your location then you are at an upper hand of grabbing a rare Pokémon or an evolution item like Moon Stone. Dr. Fone Virtual Location makes it seamless to teleport to any location across the globe while you are seated comfortably at home. Besides, you can simulate movements between two or more points and make GPS control more flexible with the help of a joystick.

How to Teleport with Dr. Fone Virtual Location

Step 1. After installing Dr. Fone Virtual Location, launch it, and select “Virtual Location.” Now connect your iPhone to the computer.

Step 2. Click the “Get Started” on the subsequent page to access the teleport options.

Step 3. The program will display a new page with three icons at the top-right. Click the third icon to take you to the teleport mode. Again enter the place you want to teleport to in the text field at the top-left of this same window and then hit “Go.”

Step 4. Click “Move Here” from the pop-up that follows to teleport to the location you provided.

2. Use Android Spoofing Tool- Pgsharp

Pgsharp is a fake GPS location tool for Android devices and is suitable for playing Pokémon from a fake location with no root. It allows users to teleport in real-time while they are just sited at home. It has a downloadable free version. It has a user-friendly interface, and once you have set the fake GPS location on your Vivo S18 Pro, you can catch rare Pokémon and evolution items with ease.

3. Use Go-tcha Evolve

Go-tcha Evolve is an application that allows you to set animations and vibration to alert you in the case of Pokémon or pokestops. You can use its “auto-catch” feature to allow it automatically grab the Pokémon or pokestops without having to respond to alerts.

How to Fix Pokemon Go Route Not Working On Vivo S18 Pro?

Pokemon Go Routes has been here for quite some time now. By far, it’s still the favorite in-game feature of many trainers all around the world. The reason is pretty obvious. You can collect tons of special rewards by doing nothing complicated other than following and completing a Route nearby. On top of that, Pokemon Go Routes can also be of great help if you’re searching for new walking paths around your location. Simply put, this particular addition to the game’s already amazing roster has many real-life and virtual benefits for the players.

However, it’s perhaps safe to say that Pokemon Go Routes is still far from perfect. There have been a few complaints from users about Pokemon Go Route not working. While this issue is fairly common among the players, the root cause differs depending on the given situation. But don’t worry. If you experience similar issues, there are many tutorials you can try to fix Pokemon Go Routes not working.

In this article, we will discuss how Pokemon Go Routes basically work. We will also talk about the main reasons why Pokemon Go Routes is not showing up sometimes. Lastly, we will provide some helpful tips to fix this kind of problem. Continue reading below to learn more.

Part 1. How Do Routes in Pokemon Go Work?

The logic behind the Pokemon Go Routes is very simple. There are only two things you need to remember about it. First, you can record a walking path anywhere and submit it for review. Your Route will immediately appear on the Pokemon Go map once it receives approval from the game developer. Of course, the quality and safety of the Route must be checked thoroughly before it becomes available to the public. Another thing about the Route is that you can use it to discover and explore new walking paths near you. All you need to do is pick your preferred Route and finish the entire trail. Afterward, you can obtain special rewards and extra bonus points upon its completion.

Do you want to try Pokemon Go Routes now? Here’s a quick guide for you on how to access it on your mobile device.

• Step 1: Launch the Pokemon Go application on your smartphone.
• Step 2: On the map view, find and click the Nearby icon at the bottom-right corner of your screen.

• Step 3: Then, click Route.

• Step 4: From there, decide if you wish to discover nearby Routes or create your own.

NOTE: The Create New Route feature is only available to selected Pokemon Go players. If Pokemon Go Routes is not showing up on your end, it’s probably because you’re not yet eligible.

Part 2. Why is Pokemon Go Routes Not Showing Up?

As previously mentioned, the root causes of the Pokemon Go Routes glitch vary from one trainer to another. It’s possible that the Pokemon Go Routes are not showing up because your Trainer Level is not high enough. Yes. This option is only available to players who reach the required level. However, the player’s respective rank is not always the culprit for this issue. There are other factors that might also result in the same problem. Check out the list below to understand it better.

There are no recorded Routes near your location

It’s possible that the Pokemon Routes are not showing up because you’re too far from them. Try to move around and see if the walking paths will finally appear on your radar. In this case, all you need to do is find the perfect spot where Routes are recorded.

The Pokemon Go application has no adequate location access on your smartphone

Is Pokemon Go Route not working on your end? Well, it’s possibly because the application has limited or restricted access to GPS on your smartphone. Don’t worry. It’s nothing serious. You can easily fix this kind of misconfiguration by adjusting your privacy settings.

Your internet connection is unstable while playing Pokemon Go

Pokemon Go Routes and most of the game’s main features require a reliable internet connection. If you’re connected to slow and unstable internet access, the Pokemon Go app will not load up properly. That’s probably the reason why Pokemon Go Routes are not completing or working at all on your end.

You’re using an outdated Pokemon Go app version

vMix Basic HD - Software based live production. vMix Basic HD includes 4 inputs, 3 cameras, streaming, recording, playlist.
This bundle includes Studio 200 for vMix from Virtualsetworks, HTTP Matrix 1.0 automation scheduler, and 4 introductory training videos from the Udemy vMix Basic to Amazing course.

Keep in mind that the Pokemon Go Routes is an additional game feature. That’s why you first need to update your existing Pokemon Go app before you can access it. The Routes is definitely not available to old versions of Pokemon Go mobile software.

The current software version of your smartphone is not compatible with the Pokemon Go Routes feature

Android 6.0 and iOS 14 or higher are the main system requirements of the Pokemon Go application. The Pokemon Go Routes are not working, or perhaps the whole application malfunctions because your software version is too old. Don’t worry. A simple OS update might resolve this problem once and for all.

Part 3. Tips on How to Fix Pokemon Go Routes Not Showing Up

Is Pokemon Go Route not working on your mobile device? Don’t sweat it. There are lots of troubleshooting methods you can try to fix this issue with just the snap of a finger. Check out the list below and find the best solution that works in your current situation.

• Switch to another internet connection that is much stronger and more reliable. You cannot enjoy much of the Pokemon Go Routes features if you’re connected to faulty internet access. If Pokemon Go Routes are not showing up, it probably has something to do with your internet connectivity.
• Don’t hesitate to update your Pokemon Go application regularly. It’s one great way to maintain the functionality of the Routes and other Pokemon Go features.
• Grant the Pokemon Go app all the necessary permission on your smartphone. Make sure it has adequate access to location services and other required mobile functions.
• Try to use a newer mobile device when playing Pokemon Go. It’s possible that the Pokemon Go Route is not working because your old smartphone is not compatible with the feature.
• Visit other locations near you. Who knows? Pokemon Go Routes might finally show up when you travel to a different neighborhood.

Part 4. Wondershare Dr.Fone: The Best Alternative When Pokemon Go DeFit is Not Working

In simple terms, DeFit is a third-party application that allows trainers to play Pokemon Go without moving physically. You can walk the required distance for egg hatching or explore Routes from the comfort of your own home. However, there have been reports recently about Pokemon Go DeFit not working. Is there a substitute for this software? The short answer is absolutely yes. Wondershare Dr.Fone has a powerful Virtual Location feature that works exactly like DeFit. It can also simulate GPD movement to complete Pokemon Go Routes without going outdoors. Do you want to try it? Here’s a short guide for you.

• Step 1: Download Wondershare Dr.Fone from its official website. Right after, install it on your computer.
• Step 2: Open the newly installed software on your desktop. Once it fully loads up, connect your smartphone immediately using a data cable. Follow the on-screen instructions to establish a secure connection between the computer and your device.
• Step 3: Access the left-side panel and then click Toolbox. Navigate to the main dashboard afterward and then click Virtual Location. If it’s your first time using this feature, let Wondershare Dr.Fone download the additional resources needed.
• Step 4: After the successful download, the Virtual Location feature will then appear in a separate window. Head over to the menu bar at the top-right corner of your screen and then click One-Stop Route. The starting point for the simulation will be designated based on your current location. If you wish to change it, go back to the menu bar again and then click Teleport Mode to assign your preferred starting point. As for the destination, you can search for your desired location or tap anywhere around the map.

• Step 5: Calibrate the necessary settings according to your liking. Start by choosing your preferred type and number of trips. Right after, adjust the movement speed by moving the slider from left to write. Then, click Move Here to commence the simulation. If you wish to reset your inputs, click Clear instead.

• Step 6: The simulation will then begin immediately. Refer to the map for the real-time progress. If you wish to halt the movement for a little while, click Pause. On the one hand, click Clear if you want to start all over again.

Conclusion

Pokemon Go players must try the Routes and explore this feature. It’s indeed an incredible development that can certainly take your game experience to a whole new level. Is Pokemon Go Route not working on your end? Don’t worry. It’s not a big problem. Refer to the troubleshooting tips listed above. One of them can surely help you a lot in this regard. If you need a substitute for the Pokemon Go DeFit that’s not working on your smartphone, try Wondershare Dr.Fone. It has a potent Virtual Location feature that is capable of simulating GPS movements needed in Pokemon Go. Download it for free.