How to Fix It: Lava Blaze 2 5G Won’t Turn On

Did your Lava Blaze 2 5G decide to go on vacation and refuses to turn on? If your Lava Blaze 2 5G won’t turn on for no apparent reason, finding why it failed to power on and the solution for it is not a fun process.

Here, we hope we are able to give you a checklist of reasons behind this issue and the possible steps you can take to rectify it.

Part 1: Common Reasons That Your Lava Blaze 2 5G Won’t Turn On

If you cannot find any reason why your Lava Blaze 2 5G will not switch on, here are some possible reasons:

1. Your Android phone is simply frozen in power-off or sleep mode. In which case, it fails to switch itself on or wake itself up when you initiate it.
2. Your phone’s battery may be out of charge.
3. The operating system or installed software is corrupted. The tell-tale sign if this is that if you manage to switch on your Lava Blaze 2 5G, it freezes or crash soon after.
4. Your device is clogged up with dust and lint causing the hardware to not work properly.
5. Your power button is broken , which caused it to not be able to trigger the necessary action needed to power up the Android phone. Check to also see if your connectors have no carbon build-up which will cause your phone to not be charged properly.

Part 2: Rescue Data on Android Phone That Will Not Turn On

If you need some help rescuing data from an Android phone that will not turn on, the Dr.Fone - Data Recovery (Android) will be your best friend in your data recovery attempt. With the help of this data recovery solution, you will be able to intuitively recover lost, deleted or corrupted data on any Android devices. Its flexibility and efficiency in rescuing data make it one of the best software out there.

Note: For now, the tool can rescue data from broken Android only if your phone is earlier than Android 8.0, or rooted.

Dr.Fone - Data Recovery (Android)

World’s 1st data retrieval software for broken Android devices.

• It can also be used to recover data from broken devices or devices that are damaged in any other way such as those stuck in a reboot loop.
• Highest retrieval rate in the industry.
• Recover photos, videos, contacts, messages, call logs, and more.
• Compatible with Lava Blaze 2 5G devices.

3981454 people have downloaded it

If your Lava Blaze 2 5G won’t turn on, here is how you can use the software to recover data:

Step 1: Launch Wondershare Dr.Fone

On your desktop computer or laptop, open Wondershare Dr.Fone. Click on Data Recovery on the left column. Connect your Lava Blaze 2 5G to the computer using a USB cable.

Step 2: Decide which file types to recover

On the next window, you will need to check the boxes corresponding to the type of files you can recover from a list. You can get back Contacts, Messages, Call History, WhatsApp messages & attachments, Photos, Audio and more.

Step 3: Select the problem with your phone

Opt for “Touch screen not responsive or cannot access the phone” or “Black/broken screen”. Click Next to continue.

Look up for your device – pick the Lava Blaze 2 5G device Name and Device Model. Advance by clicking on the Next button.

Step 4: Go into your Lava Blaze 2 5G’s Download Mode.

The data recovery tool will guide you on how you can go into your Lava Blaze 2 5G’s Download Mode. You should be getting a step-by-step guide on your computer.

Step 5: Scan the Android Phone.

Using the provided USB cable, attach your Lava Blaze 2 5G to your computer – the data recovery tool should be able to discover your device automatically and scan it for recoverable data.

Step 6: Review and Retrieve the Data from Broken Android Phone.

Wait for the program to finish scanning the phone – once completed, you will be able to get a list of recoverable files. You can have a preview of the file by highlighting them. Tick the box next to the file name and click on Recover to start retrieving the files and save them in the destination of your choosing.

Part 3: Android Phone Won’t Turn On: One Click Fix

After repeated attempts, when your Android mobile/tablet stops buzzing, what options do you have to revive it?

Well, we would recommend picking Dr.Fone - System Repair (Android) to fix an Android phone will not switch problem. This one-click Android system repair tool resolves every Android system issue without any fuss including Android Phone won’t turn on issue.

Dr.Fone - System Repair (Android)

The real fix to issues like “Android phone will not switch on”

• This tool is aptly effective for all the latest Lava Blaze 2 5G devices.
• With a high success rate for fixing Android devices, Dr.Fone - System Repair (Android) ranks at the top.
• This is a single click application to fix all Android system issues effortlessly.
• It is the first tool to repair all Android system issues in the industry.
• It is intuitive and requires no tech expertise to work with.

3981454 people have downloaded it

Prior to fixing the Android phone will not switch and getting things back in action. You need to make sure that you have backed up the Android device . It is recommended that rescuing data from an Android phone by backing up is better than recovering it post the process.

Phase 1: Get the Lava Blaze 2 5G device ready and connect it

Step 1: Run Dr.Fone on your computer once the installation is complete and tap the ‘Repair’ option form the interface. Now, connect your Android mobile with the computer.

Step 2: You will find a range of options, tap on the ‘Android Repair’ one. Hit the ‘Start’ button so that you can proceed to fix Android Phone won’t turn on hassle.

Step 3: Now, over the Lava Blaze 2 5G device information window, ensure to feed your exact device details. Press the ‘Next’ button then on.

Click here

Phase 2: Enter ‘Download’ mode for fixing your Lava Blaze 2 5G

Step 1: You need to put your Lava Blaze 2 5G in Download mode for resolving the Android phone will not switch on.

• For the Lava Blaze 2 5G device having ‘Home’ button, you got to switch it off and press ‘Volume Down’, ‘Home’, and ‘Power’ keys for 5-10 seconds at once. Let them go and click on the ‘Volume Up’ button to put your phone in ‘Download’ mode.

• For ‘Home’ button-less device, turn the phone/tablet down first. For 5 – 10 seconds, hold down the ‘Volume Down’, ‘Bixby’, and ‘Power’ buttons. Tap on the ‘Volume Up’ button to get into the ‘Download’ mode, after releasing the 3 buttons.

Step 2: Hitting the ‘Next’ key will allow you to download firmware and proceed with the next step.

Step 3: Dr.Fone - System Repair (Android) would verify your firmware download and then take a while to rectify and resolve Android Phone won’t turn on issue.

Part 4: Android Phone Won’t Turn On: Common Fix

To try fixing an Android Phone that won’t turn on, follow these steps:

1. For any Android devices, remove the battery (considering the battery of your Lava Blaze 2 5G can be removed) and leave it out for at least 30 minutes. Put back the battery in and try to turn it on.
2. Press and hold down the Power and Volume Down buttons at the same time for 15-30 minutes to reboot the Lava Blaze 2 5G device.
3. Should the first two steps do not work, charge your Lava Blaze 2 5G to get it out of the start-up loop. You can also opt to use a different battery, just in case your current battery is the source of the problem.
4. If there are any connected hardware e.g. SD card, remove them from the Lava Blaze 2 5G device.
5. Start your Lava Blaze 2 5G in Safe Mode by pressing and holding down the Menu or Volume Down button on your device.
6. Should the first five steps do not work for you, perform a hard reset. Do take note that each device will have a different way to do so and that data that is stored locally on the phone will be deleted.
7. Send your Lava Blaze 2 5G to the repair shop should none of these steps work.

Part 5: Useful Tips to Protect Your Lava Blaze 2 5G

There are several reasons as to why your Lava Blaze 2 5G won’t turn on. The problem could be a hardware or software issue which could be prevented. Here are some useful tips to protect your Lava Blaze 2 5G.

I. Hardware

• Remember that the components that make your Lava Blaze 2 5G is sensitive. To protect these components from being damaged, use a good guard casing.
• Take apart your Lava Blaze 2 5G and clean it routinely to avoid dust and lint from clogging the phone and overheating it.

II. Software

• It is recommended to download apps from Google Play Store. This way, you can be sure that your app comes from a trusted source.
• Read the app’s permission to see which part of the operating system and your personal information that you are giving access to.
• Install reliable anti-virus and anti-malware software to safeguard your Lava Blaze 2 5G from malicious attacks.
• Make sure you update your operating system, software and apps to make sure you have the latest version – the developer may have fixed the bugs that have caused problems on Android phones.

It is important to note that your phone contains some important data. Therefore, when your Lava Blaze 2 5G won’t turn on do not just give up - there are plenty of tools at your disposal to recover back your files and phone.

How to Fix Unfortunately, Contacts Has Stopped Error on Lava Blaze 2 5G

Have you recently noticed a message stating “Contacts has stopped”? This is enough to take away all your peace. As, our native contacts app stashes all our useful contacts which are time and again needed by a user. It’s malfunctioning is enough to give us chills. But, why the Lava Blaze 2 5G or any other Android device incurs such problems?

It can occur while you launch the app or while you’re in the app already finding the required contact or when any other application is trying to gain access to it. So, to rage a battle with this issue, you need to seek help of some powerful methods in killing down the issue of contacts app crashes. And, the best part is that you’ve secured yourself by reaching the right place. We will be taking an in-depth discussion on several methods that may prove to be helpful. Let’s read them up here now.

Part 1: Get Android system fixed in one click

We’re always in search of a method that provides handy solution in a quite speedy and hassle-free manner. There are hundreds of tips and tricks for the same. You never know the possibility of firmware being the major drawback. No amount of manual methods can beat the performance of Dr.Fone - System Repair (Android).It is capable of providing 100% solution to any kind of issues, your phone gets troubled with. It is designed with the technology of combating the problem of black screen of death, app crashes and several other issues. In just a single-click, ward off the issue and free your device with errors

Dr.Fone - System Repair (Android)

Fix Contacts app crashing on Android in one click

• Incorporates with 1-click technology to resolve any issues occurring in your Lava Blaze 2 5G. Black screen of death, app crash, system crash, faulty issues etc.
• fone – Repair (Android) interface is extremely simple for users and lays functionalities aptly.
• One of its kind software with highest success rate in the market.
• Fully compatible with all kinds of Android phones, models, as well as the popular carrier.
• It provides users with 24 hours customer care service to resolve queries.

3,016,434 people have downloaded it

In this tutorial, we will learn the methodology of addressing the contacts keep stopping problem and gain triumph over it.

Step 1: Load program and draw connection of device

Download Dr.Fone - System Repair (Android) on PC. While program installs, use USB cable to connect device with system. From interface, tap on “System Repair” main window.

Step 2: Opt for Android Repair option

You’ll be directed to the “System Repair” screen where you have to opt for “Android Repair” options appearing over the left panel of the program. After that, do not forget to press “Start”.

Step 3: Key in device information

From following screen, fill the fields of “Brand”, “Name”, “Model”, “Country” and several other parameters. Then, tap on “Next” option to proceed further.

Step 4: Download Firmware package

Just follow the on-screen steps for booting your Lava Blaze 2 5G into download mode. Then, hit the “Next” button to proceed with downloading the most suitable firmware package for your Lava Blaze 2 5G.

Step 5: Repair Android phone

Once the software downloads, the program will automatically repair any issues irking over your phone. Now, your phone is all free from contacts error.

Part 2: 9 Common ways to fix “Unfortunately, Contacts Has Stopped”

2.1 Restart Android system

Our response to any minuscule issue is straightaway restarting phone. This helps in clearing out any problem that might have disrupt the functioning of phone. So, to fix the problem of “Contacts app won’t open”, you too can try out your hand in this method.

1. Get hold of your Android system and long press the power button.
2. This will fadeout the main screen and showcase several options from where you’ve to tap on “Reboot/Restart” mode.

Now, your device will quickly reboot the Lava Blaze 2 5G device. Once, the Lava Blaze 2 5G device regains its normal state, check whether the issue is coming again or not.

2.2 Clear cache and data of Contacts app

The cache memory basically stashes the copies of the concerned application. It is indeed a streak of copies of the desired app storing information and incurring additional space on the storage. This might be the reason why the contact app crashes rapidly on your Lava Blaze 2 5G. Hence, it can prove to be a good remedy for this problem. Just follow down the steps mentioned below-

1. First of all, go to “Settings” application from the app drawer or from the notification panel.
2. Now, surf and select for “Applications” or “Apps & notifications”.
3. Here, you need to browse for “Contacts” app and open it.
4. On “Contacts” app, just tap on “CLEAR CACHE” and “CLEAR DATA” button. This will prompt the cache memory to be cleared.

2.3 Wipe cache partition

As we know the cache memories are the temporary files build by the firmware. These are of little importance as they are bound to become a bit more corrupted in nature. And sometimes, may indirectly become a hurdle for the working of contacts app. It is good if the Lava Blaze 2 5G device is cleared off from the caches. Instead of manually wiping down the cache memory, we will understand how to clear off the cache partition in the following steps.

1. From device, just power off your device. Then, press the “Volume Down + Power” button with “Home” combinations together.
2. In a moment’s time, lose fingers from the “Power” button but do not release fingers from “Volume Down” and “Home” buttons.
3. Once you view the “Android System Recovery” screen, just lose the “Volume Down” and “Home” buttons.
4. Over the options available, just opt for “wipe cache partition” by tapping the “Volume down” button until the desired option is highlighted.
5. Finally, push the “Power” key to give consent to the selection.

7. After, the process is through there will be an option for “Reboot System Now”. Tap on it and restart the Lava Blaze 2 5G device.

2.4 Disable Google+ app

The root cause for detecting any problem is not very easy. You never know the overloading of Google + application might have directly impacted contacts app crashes. To resolve it, disabling it may prove to be a helpful solution. Here is the quick reference for disabling Google+ application.

1. First of all, visit “Settings” from your Lava Blaze 2 5G.
2. In “Settings”, visit the “Application Manager” or “Applications” menu and browse for “Google +” app.
3. From the application main page, you can choose to do either of the methods:

• Either, completely disable the application to work by pressing on “Force stop” or “Disable” feature.
• Or, brush away the unnecessary cache piled up on your storage by using “Clear Cache” functionality.

There will be a prompt stating that the application may misbehave. However, you must disable the feature and check whether it worked out for you or not.

2.5 Update your device software

Many a times, we skip updating our device software thinking it is of less importance. In fact, one must not miss out the updates that occurs in phone. As, without the updates, the scope of some applications are affected to some extent. For its better functioning and avoiding issues like “contacts keep stopping”, here is how you should update device software.

1. First and foremost, head on to “Settings” menu. Over there, click on “About Device”.
2. There, you need to tap over “Software Update”.

The device will now check whether there are any updates available for your device. If yes, then update application right away.

2.6 Reset App Preferences

As stated, the malfunctioning of contacts can be due to be any unexpected reason. Hence, users can opt for resetting app preferences. This may prove to be helpful in brushing away the issue of “Contacts app won’t open”.

• Launch “Settings” app and surf for “Apps” or “Applications” option on your Lava Blaze 2 5G.
• Just, tap over the three dots appearing at the upper right section and then tap on “Reset app preferences”.
• At last, just select “Reset default apps”.

2.7 Delete voicemail

Do you happen to exchange voicemails quite often? It can trigger to be the reason for contact app crashes. If your device happens to have a bulk of voicemails, you must get rid of them sooner or later. As, these might standout to be the prime reason for contacts stopping on Lava Blaze 2 5G. If you’re unaware about the procedure of removing all kinds of voicemails, you can proceed to make use of the following steps.

1. Start with, launching the “Google Voice” app.
2. From there, duly opt for “Voicemail”.
3. Just click on the press menu option and at last select “Delete” option.

2.8 Uninstall the downloaded apps

Some applications contain some unwanted advertisements and some elements of malware. This can be enough for disrupting the functionality of the built-in contact app won’t open. It is crucial for your phone to be detoxed from such elements. You need to manually scrap off such applications. Do, ensure to download the application from the genuine source for future use.

• On your Lava Blaze 2 5G, just go to “Home” screen and tap on “Apps” icon.
• Then, tap on “Settings” icon followed by going to “Applications” or “Apps & Preferences” menu.
• After that, tap on “Menu icon” which will showcase the apps installed on device.
• Simply, open the app and hit the “Uninstall” button to brush away that app. Repeat the same with other application(s).

Now, check whether you’ve fought the battle with the problem or not.

2.9 Reset to Factory Settings

Last but not least, if all the methods falls flat to resolve the issue of contacts app won’t open. Then, it might be your device has some internal problem. This can be any software crash which might not be fixing with the aforementioned steps. That is where reset to factory settings may prove to be a good option. With this method, your phone will be cleared of all the components, settings and everything present in it. Here are is the comprehensive tutorial for biding bye to the problem of contacts app won’t open.

Note: Do ensure to take a backup of all the data available in your device. As, we don’t want you to regret afterwards.

• Just go to “Settings” and surf and select “Backup & Reset” option.
• You need to toggle on the option for performing the backup on your Google account.
• Then, tap on “Reset” button and then tick mark the option for resetting your phone.

How to Exit Android Factory Mode On Lava Blaze 2 5G?

You’ve often heard that recovery mode will solve just about any problem your Lava Blaze 2 5G is experiencing. This is mostly true and one of the components of Android’s recovery mode, factory mode or factory reset is one of the most efficient ways to solve various problems on your device. While factory mode is often a good thing, there are times when your device can enter factory mode on its own. Other times, you can safely enter factory mode but not know how to get out.

Fortunately for you, this article will explain all aspects of factory mode and especially how to safely exit factory mode.

Part 1. What is Android Factory Mode?

Factory mode or what is commonly known as factory reset is one of the options available for you when your Lava Blaze 2 5G is in recovery mode. Several options are available for you once you enter Recovery mode on your device but few are as effective as the wipe data/ factory reset option. This option is useful in solving a whole host of problems that your device could be experiencing.

If you have been using your Lava Blaze 2 5G for a while now and its performance to be less than ideal, a factory reset might be a good solution. That is however not the only problem a factory reset or factory mode can solve. It will also work for a number or Android errors that you may experience, problems caused by faulty firmware updates and also tweaks made on your device that may not have worked as expected.

It is however important to note that a factory reset or factory mode does often result in the loss of all your data. Therefore a backup is necessary to protect against this data loss risk.

Part 2. Backup your Android Device First

Before we can see how to safely enter and exit factory mode, it is important to have a full backup of your device. We mentioned that a factory mode will likely erase all the data on your device. A backup will ensure that you can get your phone back to its original state before the factory mode.

In order to do a full and complete backup of your device you need to have a tool that will not only ensure that you backup everything on your device but one that makes it easy for you to accomplish this. One of the best tools in the market is Dr.Fone - Backup & Resotre (Android) . This software is designed to enable you to create a full backup of your device.

Dr.Fone - Backup & Restore (Android)

Flexibly Backup and Restore Android Data

• Selectively backup Android data to computer with one click.
• Preview and restore backup to any Android devices.
• Supports 8000+ Android devices.
• There is no data lost during backup, export or restore.

3,428,803 people have downloaded it

Follow these very simple steps to use this MobileTrans Phone Transfer software to create a full backup of your device.

Step 1. Launch Dr.Fone on your computer and choose “Backup & Restore”

Run the software on your computer and you can see all features displayed in the primary window. Choose this one: Backup & Restore. It allows you to get your device backed up entirely with one click.

Step 2. Plug in with your device

Then plug in with your device to the computer. When your devic is detected, click on Backup.

Step 3. Select the file types to backup

The program will display all the file types it can support to backup. Just select the ones you would like to backup and hit Backup.

Step 4. Start backing up your device to the computer

After choosing the file’s type for backup, click “Backup” to begin backing up your device to your computer. It will take you a few minutes, depending on the storage of the data.

Note: You can use the feature of “Restore From Backup” to restore the backup file to your device, when you have the need later.

Part 3: One Click Solution to fix Android stuck in factory mode

From the above parts, you are well aware about what is factory mode. As we discussed, this mode fixes most troubles with Android devices.

But for situations when your Lava Blaze 2 5G gets stuck in this very same factory mode, the most feasible solution for you is Dr.Fone - System Repair (Android) . This tool fixes all Android system issues including unresponsive or bricked device, stuck on Lava Blaze 2 5G logo or factory mode or blue screen of death with a single click.

Dr.Fone - System Repair (Android)

One click fix to Android stuck in factory mode

• You can easily fix your Android stuck in factory mode with this tool.
• The one-click solution’s ease of operation is appreciable.
• It has carved a niche being the first Android repair tool in the market.
• You don’t need to be a pro in technology to use this program.
• It is compatible with all latest Lava Blaze 2 5G devices like Galaxy S9.

3,645,867 people have downloaded it

In this part we will explain how to exit Android recovery mode using Dr.Fone - System Repair (Android) . Prior to proceeding, you got to remember that device backup is paramount to keep your data safe. This process might erase your Lava Blaze 2 5G data.

Phase 1: Ready your device and connect it

Step 1: Installation completion needs to be followed by running Dr.Fone on your system. Over the program window, tap ‘Repair’ afterwards and get the Android device connected.

Step 2: Select the ‘Android Repair’ option from the list to fix Android stuck in factory modeissue. Hit the ‘Start’ button soon after.

Step 3: Select Android device details on the Lava Blaze 2 5G device information window, followed by tapping the ‘Next’ button.

Step 4: Enter ‘000000’ for confirmation then proceed.

Phase 2: Get in ‘Download’ mode for repairing the Android device

Step 1: It’s important to put the Android device in ‘Download’ mode, here are the steps to do so –

• On a ‘Home’ button-less device – turn off the Lava Blaze 2 5G device and push down the ‘Volume Down’, ‘Power’ and ‘Bixby’ buttons for about 10 seconds and un-hold. Now, hit the ‘Volume Up’ button to get into ‘Download’ mode.

• For a device with ‘Home’ button – switch it off and hold down the ‘Power’, ‘Volume Down’ and ‘Home’ buttons together for 10 seconds and release. Click the ‘Volume Up’ button for entering ‘Download’ mode.

Step 2: Press ‘Next’ for initiating firmware downloading.

Step 3: Dr.Fone –Repair (Android) starts Android repair as soon as download and verification of firmware is done. All Android issues along with Android stuck in factory mode will be fixed now.

Part 4. Common Solutions to Exit Factory Mode on Android

Having a backup of all your data will eliminate the risk of losing any of your data. You can now safely exit factory mode using one of the 2 methods below. These two methods will work on a rooted device.

Method 1: Using “ES File Explorer”

To use this method, you will need to have installed file explorer on your device.

Step 1: Open “ES File Explorer” and then press the icon on the top left corner

Step 2: Next, go to “Tools” and then turn on “Root Explorer”

Step 3: Go to Local> Device> efs> Factory App and then open factorymode as text in the “ES Note Editor” Turn it ON

Step 4: Open keystr as text in the “ES Note Editor” and change it to ON. Save it.

Step 5: Reboot the Lava Blaze 2 5G device

Method 2: Using Terminal Emulator

Step 1: Install Terminal emulator

Step 2: Type “su”

Step 3: Then Type the following;

rm /efs/FactoryApp/keystr

rm /efs / FactoryApp/ Factorymode

Echo –n ON >> / efs/ FactoryApp/ keystr

Echo –n ON >> / efs/ FactoryApp/ factorymode

chown 1000.1000/ efs/FactoryApp/keystr

chown 1000.1000/ efs/FactoryApp/ factorymode

chmod 0744 / efs/FactoryApp/keystr

chmod 0744 / efs/ FactoryApp/ factorymode

reboot

You can also exit factory mode on unrooted device by going to Settings> Application manager> All and the search for Factory Test and “Clear Data”, “Clear Cache”

As much as factory mode can be a useful solution to a number of problems, it can be quite annoying when it pops up unexpectedly. Now you are equipped with 2 effective solutions to help you safely exit factory mode if ever you find yourself in this situation.