How to Exit Android Factory Mode On Xiaomi Redmi Note 12T Pro?

You’ve often heard that recovery mode will solve just about any problem your Xiaomi Redmi Note 12T Pro is experiencing. This is mostly true and one of the components of Android’s recovery mode, factory mode or factory reset is one of the most efficient ways to solve various problems on your device. While factory mode is often a good thing, there are times when your device can enter factory mode on its own. Other times, you can safely enter factory mode but not know how to get out.

Fortunately for you, this article will explain all aspects of factory mode and especially how to safely exit factory mode.

Part 1. What is Android Factory Mode?

Factory mode or what is commonly known as factory reset is one of the options available for you when your Xiaomi Redmi Note 12T Pro is in recovery mode. Several options are available for you once you enter Recovery mode on your device but few are as effective as the wipe data/ factory reset option. This option is useful in solving a whole host of problems that your device could be experiencing.

If you have been using your Xiaomi Redmi Note 12T Pro for a while now and its performance to be less than ideal, a factory reset might be a good solution. That is however not the only problem a factory reset or factory mode can solve. It will also work for a number or Android errors that you may experience, problems caused by faulty firmware updates and also tweaks made on your device that may not have worked as expected.

It is however important to note that a factory reset or factory mode does often result in the loss of all your data. Therefore a backup is necessary to protect against this data loss risk.

Part 2. Backup your Android Device First

Before we can see how to safely enter and exit factory mode, it is important to have a full backup of your device. We mentioned that a factory mode will likely erase all the data on your device. A backup will ensure that you can get your phone back to its original state before the factory mode.

In order to do a full and complete backup of your device you need to have a tool that will not only ensure that you backup everything on your device but one that makes it easy for you to accomplish this. One of the best tools in the market is Dr.Fone - Backup & Resotre (Android) . This software is designed to enable you to create a full backup of your device.

Dr.Fone - Backup & Restore (Android)

Flexibly Backup and Restore Android Data

Selectively backup Android data to computer with one click.
Preview and restore backup to any Android devices.
Supports 8000+ Android devices.
There is no data lost during backup, export or restore.

3,428,803 people have downloaded it

Follow these very simple steps to use this MobileTrans Phone Transfer software to create a full backup of your device.

Step 1. Launch Dr.Fone on your computer and choose “Backup & Restore”

Run the software on your computer and you can see all features displayed in the primary window. Choose this one: Backup & Restore. It allows you to get your device backed up entirely with one click.

Step 2. Plug in with your device

Then plug in with your device to the computer. When your devic is detected, click on Backup.

Step 3. Select the file types to backup

The program will display all the file types it can support to backup. Just select the ones you would like to backup and hit Backup.

Step 4. Start backing up your device to the computer

After choosing the file’s type for backup, click “Backup” to begin backing up your device to your computer. It will take you a few minutes, depending on the storage of the data.

Note: You can use the feature of “Restore From Backup” to restore the backup file to your device, when you have the need later.

Part 3: One Click Solution to fix Android stuck in factory mode

From the above parts, you are well aware about what is factory mode. As we discussed, this mode fixes most troubles with Android devices.

But for situations when your Xiaomi Redmi Note 12T Pro gets stuck in this very same factory mode, the most feasible solution for you is Dr.Fone - System Repair (Android) . This tool fixes all Android system issues including unresponsive or bricked device, stuck on Xiaomi Redmi Note 12T Pro logo or factory mode or blue screen of death with a single click.

Dr.Fone - System Repair (Android)

One click fix to Android stuck in factory mode

You can easily fix your Android stuck in factory mode with this tool.
The one-click solution’s ease of operation is appreciable.
It has carved a niche being the first Android repair tool in the market.
You don’t need to be a pro in technology to use this program.
It is compatible with all latest Xiaomi Redmi Note 12T Pro devices like Galaxy S9.

3,645,867 people have downloaded it

In this part we will explain how to exit Android recovery mode using Dr.Fone - System Repair (Android) . Prior to proceeding, you got to remember that device backup is paramount to keep your data safe. This process might erase your Xiaomi Redmi Note 12T Pro data.

Phase 1: Ready your device and connect it

Step 1: Installation completion needs to be followed by running Dr.Fone on your system. Over the program window, tap ‘Repair’ afterwards and get the Android device connected.

Step 2: Select the ‘Android Repair’ option from the list to fix Android stuck in factory modeissue. Hit the ‘Start’ button soon after.

Step 3: Select Android device details on the Xiaomi Redmi Note 12T Pro device information window, followed by tapping the ‘Next’ button.

Step 4: Enter ‘000000’ for confirmation then proceed.

Phase 2: Get in ‘Download’ mode for repairing the Android device

Step 1: It’s important to put the Android device in ‘Download’ mode, here are the steps to do so –

On a ‘Home’ button-less device – turn off the Xiaomi Redmi Note 12T Pro device and push down the ‘Volume Down’, ‘Power’ and ‘Bixby’ buttons for about 10 seconds and un-hold. Now, hit the ‘Volume Up’ button to get into ‘Download’ mode.

For a device with ‘Home’ button – switch it off and hold down the ‘Power’, ‘Volume Down’ and ‘Home’ buttons together for 10 seconds and release. Click the ‘Volume Up’ button for entering ‘Download’ mode.

Step 2: Press ‘Next’ for initiating firmware downloading.

Step 3: Dr.Fone –Repair (Android) starts Android repair as soon as download and verification of firmware is done. All Android issues along with Android stuck in factory mode will be fixed now.

Part 4. Common Solutions to Exit Factory Mode on Android

Having a backup of all your data will eliminate the risk of losing any of your data. You can now safely exit factory mode using one of the 2 methods below. These two methods will work on a rooted device.

Method 1: Using “ES File Explorer”

To use this method, you will need to have installed file explorer on your device.

Step 1: Open “ES File Explorer” and then press the icon on the top left corner

Step 2: Next, go to “Tools” and then turn on “Root Explorer”

Step 3: Go to Local> Device> efs> Factory App and then open factorymode as text in the “ES Note Editor” Turn it ON

Step 4: Open keystr as text in the “ES Note Editor” and change it to ON. Save it.

Step 5: Reboot the Xiaomi Redmi Note 12T Pro device

Method 2: Using Terminal Emulator

Step 1: Install Terminal emulator

Step 2: Type “su”

Step 3: Then Type the following;

rm /efs/FactoryApp/keystr

rm /efs / FactoryApp/ Factorymode

Echo –n ON >> / efs/ FactoryApp/ keystr

Echo –n ON >> / efs/ FactoryApp/ factorymode

chown 1000.1000/ efs/FactoryApp/keystr

chown 1000.1000/ efs/FactoryApp/ factorymode

chmod 0744 / efs/FactoryApp/keystr

chmod 0744 / efs/ FactoryApp/ factorymode

reboot

You can also exit factory mode on unrooted device by going to Settings> Application manager> All and the search for Factory Test and “Clear Data”, “Clear Cache”

As much as factory mode can be a useful solution to a number of problems, it can be quite annoying when it pops up unexpectedly. Now you are equipped with 2 effective solutions to help you safely exit factory mode if ever you find yourself in this situation.

9 Quick Fixes to Unfortunately TouchWiz has stopped Of Xiaomi Redmi Note 12T Pro

“Unfortunately TouchWiz home has stopped” is the talk of the town due to annoying TouchWiz UI, a front-end user interface developed by Xiaomi Redmi Note 12T Pro. Not to mention, the Xiaomi Redmi Note 12T Pro has borne a whole lot of heat from its agitated users over the years and the reason is pretty much obvious due to the pre-installed bloatware apps and the theme launch “TouchWiz home”. That not just brutally annoys users and eats up a heck of internal storage space but lags up too often due to low speed and stability. As a result users end up with “Unfortunately TouchWiz home has stopped” and “Unfortunately, TouchWiz has stopped”. Apparently, there are several flaws in the design and functioning of this launcher and hence, Touchwiz keeps stopping or becomes unresponsive.

Part 1: Common scenarios when TouchWiz keeps stopping

Here in this section, we will introduce some scenarios that can be blamed for why TouchWiz is not working. Check out the following points:

More often than not, the TouchWiz keeps stopping after an Android update. When we update our Xiaomi Redmi Note 12T Pro device, the old data and cache usually conflicts with TouchWIz thereby cropping up this mess.
When you disable some built-in apps, you might get in trouble with TouchWiz. Doing this sometimes can hamper the TouchWiz operation and raise the “**unfortunately TouchWiz home has stopped**” error message.
Many times installing some third-party apps and widgets can cause this problem. The apps like launchers can be conflicting with TouchWiz home launcher and therefore cease it to work. Also, a glitched widget is responsible for the same i.e. forces stop the TouchWiz.

Part 2: 9 Fixes to “Unfortunately TouchWiz has stopped”

Fix “TouchWiz keeps stopping” by repairing Android system

When your TouchWiz keeps stopping and you aren’t able to proceed further, the best way to handle the situation is to repair the Android system. And the best that can help you to serve the purpose is Dr.Fone - System Repair (Android). It has the ability to fix any sort of Android system issue without any complications. To fix this issue, the tool only takes few minutes of yours and performs smoothly. Moreover, you don’t have to worry if you aren’t tech pro. This tool requires no special technical know-how. Here are the advantages you get with this tool.

Dr.Fone - System Repair (Android)

One click tool to fix “Unfortunately TouchWiz has stopped”

A very easy tool that fixes problems in just one click
Provides full support all day all night as well as offers 7 day money back challenge
Enjoys higher success rate and considered as first tool carrying such amazing functionalities
Able to fix wide variety of Android issues including app crashing, black/white screen of death
Fully secured and no harm regarding any virus infection

3,211,972 people have downloaded it

Step 1: Download the Program

The one-click repairing process begins with downloading Dr.Fone from its official website. When it is downloaded, follow the installation steps. Upon successful installation, launch the tool on your PC.

Step 2: Connect your Xiaomi Redmi Note 12T Pro Device

After you open the software, hit on the “System Repair” button from the main interface. With the help of a genuine USB cable, get your Xiaomi Redmi Note 12T Pro phone and connect it with the computer.

Step 3: Choose the Tab

Now, from the next screen, you are supposed to choose “Android Repair” tab. It is given on the left panel.

Step 4: Enter Right Information

Please keep your mobile details handy as you will need them in the next window. You will need to enter the correct brand, model, and country name etc. for better detection of your device.

Step 5: Confirm Actions

This process may result in removing your data hence we strongly recommend you to keep a backup of your data.

Tip: You can use Dr.Fone – Phone Backup (Android) to backup your Xiaomi Redmi Note 12T Pro device in case you’re wondering how.

Step 6: Take your Device in Download mode

You will get some instructions on your screen to keep your device in Download mode. Follow them according to the Xiaomi Redmi Note 12T Pro device you own and hit “Next”. When you do this, the program will detect your device and let you download the latest firmware.

Step 7: Repair Device

Now, when the firmware is downloaded, the program will itself begin to repair your device. Wait and keep the Xiaomi Redmi Note 12T Pro device connected until you get the notification for process completion.

Clear the cache data the TouchWiz

Maximum Android devices are designed to deleted cache data upon getting updated to the newest Android system. However, Xiaomi Redmi Note 12T Pro stands as an exception in such case. And therefore, many times TouchWiz starts stopping right after upgrading. Thus, due to the collection of cache data, TouchWiz can display error. This calls for removing the cache from TouchWiz and run things smoothly. Here is how to do this:

Tap on “Apps” from the Home screen firstly.
Launch “Settings” afterwards
Look for “Applications” and tap on it followed by “Application Manager”.
When Application Manager gets opened, swipe towards right to get into the “All” screen.
Now, choose “TouchWiz” and tap “Clear Cache”.
Now, tap “Clear Data” followed by “OK”.
Now restart your device.

Please note that this will delete all your Home screens post this method.

Disable Motion & gesture settings

The functions regarding Motions and Gestures can be responsible for why TouchWiz home has stopped in your device. Usually the Xiaomi Redmi Note 12T Pro devices running on Android version less than Marshmallow are prone to encountering this issue. Or the Xiaomi Redmi Note 12T Pro devices having modest specs often fall prey to the issue. When you disable these settings, you might get out of the problem.

Change the Animation Scale

When you use TouchWiz, it may consume higher memory usage for high amount of graphic maintenance. As a result, the “**unfortunately TouchWiz home has stopped**” error might crop up. Taking this into consideration, you should try reconfiguring the animation scale and get rid of the error. Here’s how:

Clear Cache Partition

In case the above steps didn’t figure out the problem, here is the next tip. This method can be counted as one of the most effective one. Because it is able to fix minor issues in Android devices, we recommend you for “**TouchWiz home has stopped**” issue too. Let us know how you can do it:

Turn off your Xiaomi Redmi Note 12T Pro device.
Start pressing and holding “Volume Up” and “Power” buttons simultaneously.
Keep doing this until you see the Android screen. This will take your device into recovery mode.
You will observe some options on the screen. Take help of Volume buttons, scroll down to choose “Wipe Cache Partition”. Press Power button to confirm and the Xiaomi Redmi Note 12T Pro device will be rebooted.

Check now if the error is eliminated. If unfortunately not, please try the following solution.

Enable the easy mode

For some users, enabling Easy Mode has been of great assistance. This feature aims to make the user experience more efficient by simply eliminating complex features. The Easy Mode removes those features that confuse the users by messing up the screen. Hence, we suggest you to switch to this mode in order to remove “**TouchWiz not working**” problem. The steps are:

Open “Settings” and go to “Personalization”.
Hit on “Easy Mode” now.

Hope the TouchWiz won’t keep stopping error does not pop up anymore!

Boot your phone to safe mode

Here is the next solution to be followed when TouchWiz keeps stopping. As we already said, third-party apps can cause this issue, booting your device in the Safe mode will disable those apps temporarily. Hence you need to boot your Xiaomi Redmi Note 12T Pro device to Safe mode and check if the reason is any third-party app.

Switch off your device to initiate.
Press “Power” button and keep doing this until device’s logo appears on the screen.
When you see logo appearing, instantly release the button and start holding “Volume Down” button.
Keep holding until rebooting finishes.
You will now witness “Safe mode” on the bottom screen. You can now release the button.

Reset Factory settings

If the above method went futile and you’re still at the same place, then factory reset is the next logical step to be taken. We suggest this method because it will take your device to its factory state. As a result, TouchWiz will probably get normal and work perfectly.

Along with this, we would also suggest you go take backup of your data so that you won’t lose any of the personal information from your device after performing factory reset. For your convenience, we have stated the backup steps too in the following guide. Have a look:

Run “Settings’ in your device and go to “Backup & Reset”.
Notice if “Back up my data” is enabled or not. If not, turn it on and create backup.
Now, scroll for “Factory Data reset” option and confirm it by clicking “Reset Phone”.

Wait a few minutes and your device will reboot.

Install a new launcher to replace TouchWiz

We believe that you will find the above methods helpful. However, if still in case your TouchWiz is not working, we advice you that you should install a new theme launcher in your device. It will be a wise option to ditch TouchWiz in such scenario rather than tolerating the problem. Hope this advice will help you.

How to Fix It: Xiaomi Redmi Note 12T Pro Won’t Turn On

Did your Xiaomi Redmi Note 12T Pro decide to go on vacation and refuses to turn on? If your Xiaomi Redmi Note 12T Pro won’t turn on for no apparent reason, finding why it failed to power on and the solution for it is not a fun process.

Here, we hope we are able to give you a checklist of reasons behind this issue and the possible steps you can take to rectify it.

Part 1: Common Reasons That Your Xiaomi Redmi Note 12T Pro Won’t Turn On

If you cannot find any reason why your Xiaomi Redmi Note 12T Pro will not switch on, here are some possible reasons:

Your Android phone is simply frozen in power-off or sleep mode. In which case, it fails to switch itself on or wake itself up when you initiate it.
Your phone’s battery may be out of charge.
The operating system or installed software is corrupted. The tell-tale sign if this is that if you manage to switch on your Xiaomi Redmi Note 12T Pro, it freezes or crash soon after.
Your device is clogged up with dust and lint causing the hardware to not work properly.
Your power button is broken , which caused it to not be able to trigger the necessary action needed to power up the Android phone. Check to also see if your connectors have no carbon build-up which will cause your phone to not be charged properly.

Part 2: Rescue Data on Android Phone That Will Not Turn On

If you need some help rescuing data from an Android phone that will not turn on, the Dr.Fone - Data Recovery (Android) will be your best friend in your data recovery attempt. With the help of this data recovery solution, you will be able to intuitively recover lost, deleted or corrupted data on any Android devices. Its flexibility and efficiency in rescuing data make it one of the best software out there.

Note: For now, the tool can rescue data from broken Android only if your phone is earlier than Android 8.0, or rooted.

Dr.Fone - Data Recovery (Android)

World’s 1st data retrieval software for broken Android devices.

It can also be used to recover data from broken devices or devices that are damaged in any other way such as those stuck in a reboot loop.
Highest retrieval rate in the industry.
Recover photos, videos, contacts, messages, call logs, and more.
Compatible with Xiaomi Redmi Note 12T Pro devices.

3981454 people have downloaded it

If your Xiaomi Redmi Note 12T Pro won’t turn on, here is how you can use the software to recover data:

Step 1: Launch Wondershare Dr.Fone

On your desktop computer or laptop, open Wondershare Dr.Fone. Click on Data Recovery on the left column. Connect your Xiaomi Redmi Note 12T Pro to the computer using a USB cable.

Step 2: Decide which file types to recover

On the next window, you will need to check the boxes corresponding to the type of files you can recover from a list. You can get back Contacts, Messages, Call History, WhatsApp messages & attachments, Photos, Audio and more.

Step 3: Select the problem with your phone

Opt for “Touch screen not responsive or cannot access the phone” or “Black/broken screen”. Click Next to continue.

Look up for your device – pick the Xiaomi Redmi Note 12T Pro device Name and Device Model. Advance by clicking on the Next button.

Step 4: Go into your Xiaomi Redmi Note 12T Pro’s Download Mode.

The data recovery tool will guide you on how you can go into your Xiaomi Redmi Note 12T Pro’s Download Mode. You should be getting a step-by-step guide on your computer.

Step 5: Scan the Android Phone.

Using the provided USB cable, attach your Xiaomi Redmi Note 12T Pro to your computer – the data recovery tool should be able to discover your device automatically and scan it for recoverable data.

Step 6: Review and Retrieve the Data from Broken Android Phone.

Wait for the program to finish scanning the phone – once completed, you will be able to get a list of recoverable files. You can have a preview of the file by highlighting them. Tick the box next to the file name and click on Recover to start retrieving the files and save them in the destination of your choosing.

Part 3: Android Phone Won’t Turn On: One Click Fix

After repeated attempts, when your Android mobile/tablet stops buzzing, what options do you have to revive it?

Well, we would recommend picking Dr.Fone - System Repair (Android) to fix an Android phone will not switch problem. This one-click Android system repair tool resolves every Android system issue without any fuss including Android Phone won’t turn on issue.

Dr.Fone - System Repair (Android)

The real fix to issues like “Android phone will not switch on”

This tool is aptly effective for all the latest Xiaomi Redmi Note 12T Pro devices.
With a high success rate for fixing Android devices, Dr.Fone - System Repair (Android) ranks at the top.
This is a single click application to fix all Android system issues effortlessly.
It is the first tool to repair all Android system issues in the industry.
It is intuitive and requires no tech expertise to work with.

3981454 people have downloaded it

Prior to fixing the Android phone will not switch and getting things back in action. You need to make sure that you have backed up the Android device . It is recommended that rescuing data from an Android phone by backing up is better than recovering it post the process.

Phase 1: Get the Xiaomi Redmi Note 12T Pro device ready and connect it

Step 1: Run Dr.Fone on your computer once the installation is complete and tap the ‘Repair’ option form the interface. Now, connect your Android mobile with the computer.

Step 2: You will find a range of options, tap on the ‘Android Repair’ one. Hit the ‘Start’ button so that you can proceed to fix Android Phone won’t turn on hassle.

Step 3: Now, over the Xiaomi Redmi Note 12T Pro device information window, ensure to feed your exact device details. Press the ‘Next’ button then on.

Phase 2: Enter ‘Download’ mode for fixing your Xiaomi Redmi Note 12T Pro

Step 1: You need to put your Xiaomi Redmi Note 12T Pro in Download mode for resolving the Android phone will not switch on.

For the Xiaomi Redmi Note 12T Pro device having ‘Home’ button, you got to switch it off and press ‘Volume Down’, ‘Home’, and ‘Power’ keys for 5-10 seconds at once. Let them go and click on the ‘Volume Up’ button to put your phone in ‘Download’ mode.

For ‘Home’ button-less device, turn the phone/tablet down first. For 5 – 10 seconds, hold down the ‘Volume Down’, ‘Bixby’, and ‘Power’ buttons. Tap on the ‘Volume Up’ button to get into the ‘Download’ mode, after releasing the 3 buttons.

Step 2: Hitting the ‘Next’ key will allow you to download firmware and proceed with the next step.

Step 3: Dr.Fone - System Repair (Android) would verify your firmware download and then take a while to rectify and resolve Android Phone won’t turn on issue.

Part 4: Android Phone Won’t Turn On: Common Fix

To try fixing an Android Phone that won’t turn on, follow these steps:

For any Android devices, remove the battery (considering the battery of your Xiaomi Redmi Note 12T Pro can be removed) and leave it out for at least 30 minutes. Put back the battery in and try to turn it on.
Press and hold down the Power and Volume Down buttons at the same time for 15-30 minutes to reboot the Xiaomi Redmi Note 12T Pro device.
Should the first two steps do not work, charge your Xiaomi Redmi Note 12T Pro to get it out of the start-up loop. You can also opt to use a different battery, just in case your current battery is the source of the problem.
If there are any connected hardware e.g. SD card, remove them from the Xiaomi Redmi Note 12T Pro device.
Start your Xiaomi Redmi Note 12T Pro in Safe Mode by pressing and holding down the Menu or Volume Down button on your device.
Should the first five steps do not work for you, perform a hard reset. Do take note that each device will have a different way to do so and that data that is stored locally on the phone will be deleted.
Send your Xiaomi Redmi Note 12T Pro to the repair shop should none of these steps work.

Part 5: Useful Tips to Protect Your Xiaomi Redmi Note 12T Pro

There are several reasons as to why your Xiaomi Redmi Note 12T Pro won’t turn on. The problem could be a hardware or software issue which could be prevented. Here are some useful tips to protect your Xiaomi Redmi Note 12T Pro.

I. Hardware

Remember that the components that make your Xiaomi Redmi Note 12T Pro is sensitive. To protect these components from being damaged, use a good guard casing.
Take apart your Xiaomi Redmi Note 12T Pro and clean it routinely to avoid dust and lint from clogging the phone and overheating it.

II. Software

It is recommended to download apps from Google Play Store. This way, you can be sure that your app comes from a trusted source.
Read the app’s permission to see which part of the operating system and your personal information that you are giving access to.
Install reliable anti-virus and anti-malware software to safeguard your Xiaomi Redmi Note 12T Pro from malicious attacks.
Make sure you update your operating system, software and apps to make sure you have the latest version – the developer may have fixed the bugs that have caused problems on Android phones.

It is important to note that your phone contains some important data. Therefore, when your Xiaomi Redmi Note 12T Pro won’t turn on do not just give up - there are plenty of tools at your disposal to recover back your files and phone.

Change Location

How to Exit Android Factory Mode On Xiaomi Redmi Note 12T Pro? | Dr.fone