How to Exit Android Factory Mode On Tecno Spark 20? | Dr.fone
How to Exit Android Factory Mode On Tecno Spark 20?
You’ve often heard that recovery mode will solve just about any problem your Tecno Spark 20 is experiencing. This is mostly true and one of the components of Android’s recovery mode, factory mode or factory reset is one of the most efficient ways to solve various problems on your device. While factory mode is often a good thing, there are times when your device can enter factory mode on its own. Other times, you can safely enter factory mode but not know how to get out.
Fortunately for you, this article will explain all aspects of factory mode and especially how to safely exit factory mode.
Part 1. What is Android Factory Mode?
Factory mode or what is commonly known as factory reset is one of the options available for you when your Tecno Spark 20 is in recovery mode. Several options are available for you once you enter Recovery mode on your device but few are as effective as the wipe data/ factory reset option. This option is useful in solving a whole host of problems that your device could be experiencing.
If you have been using your Tecno Spark 20 for a while now and its performance to be less than ideal, a factory reset might be a good solution. That is however not the only problem a factory reset or factory mode can solve. It will also work for a number or Android errors that you may experience, problems caused by faulty firmware updates and also tweaks made on your device that may not have worked as expected.
It is however important to note that a factory reset or factory mode does often result in the loss of all your data. Therefore a backup is necessary to protect against this data loss risk.
Part 2. Backup your Android Device First
Before we can see how to safely enter and exit factory mode, it is important to have a full backup of your device. We mentioned that a factory mode will likely erase all the data on your device. A backup will ensure that you can get your phone back to its original state before the factory mode.
In order to do a full and complete backup of your device you need to have a tool that will not only ensure that you backup everything on your device but one that makes it easy for you to accomplish this. One of the best tools in the market is Dr.Fone - Backup & Resotre (Android) . This software is designed to enable you to create a full backup of your device.
Dr.Fone - Backup & Restore (Android)
Flexibly Backup and Restore Android Data
- Selectively backup Android data to computer with one click.
- Preview and restore backup to any Android devices.
- Supports 8000+ Android devices.
- There is no data lost during backup, export or restore.
3,428,803 people have downloaded it
Follow these very simple steps to use this MobileTrans Phone Transfer software to create a full backup of your device.
Step 1. Launch Dr.Fone on your computer and choose “Backup & Restore”
Run the software on your computer and you can see all features displayed in the primary window. Choose this one: Backup & Restore. It allows you to get your device backed up entirely with one click.
Allavsoft Batch Download Online Videos, Music Offline to MP4, MP3, MOV, etc format
Step 2. Plug in with your device
Then plug in with your device to the computer. When your devic is detected, click on Backup.
Step 3. Select the file types to backup
The program will display all the file types it can support to backup. Just select the ones you would like to backup and hit Backup.
The BootIt Collection covers multi-booting, partitioning, and disk imaging on traditional PC’s using the standard BIOS and newer PC’s using UEFI. The collection includes BootIt Bare Metal (BIBM) for standard BIOS systems and BootIt UEFI (BIU) for UEFI system.
Step 4. Start backing up your device to the computer
After choosing the file’s type for backup, click “Backup” to begin backing up your device to your computer. It will take you a few minutes, depending on the storage of the data.
Note: You can use the feature of “Restore From Backup” to restore the backup file to your device, when you have the need later.
Part 3: One Click Solution to fix Android stuck in factory mode
From the above parts, you are well aware about what is factory mode. As we discussed, this mode fixes most troubles with Android devices.
But for situations when your Tecno Spark 20 gets stuck in this very same factory mode, the most feasible solution for you is Dr.Fone - System Repair (Android) . This tool fixes all Android system issues including unresponsive or bricked device, stuck on Tecno Spark 20 logo or factory mode or blue screen of death with a single click.
Dr.Fone - System Repair (Android)
One click fix to Android stuck in factory mode
- You can easily fix your Android stuck in factory mode with this tool.
- The one-click solution’s ease of operation is appreciable.
- It has carved a niche being the first Android repair tool in the market.
- You don’t need to be a pro in technology to use this program.
- It is compatible with all latest Tecno Spark 20 devices like Galaxy S9.
3,645,867 people have downloaded it
In this part we will explain how to exit Android recovery mode using Dr.Fone - System Repair (Android) . Prior to proceeding, you got to remember that device backup is paramount to keep your data safe. This process might erase your Tecno Spark 20 data.
Phase 1: Ready your device and connect it
Step 1: Installation completion needs to be followed by running Dr.Fone on your system. Over the program window, tap ‘Repair’ afterwards and get the Android device connected.
Step 2: Select the ‘Android Repair’ option from the list to fix Android stuck in factory modeissue. Hit the ‘Start’ button soon after.
Step 3: Select Android device details on the Tecno Spark 20 device information window, followed by tapping the ‘Next’ button.
Step 4: Enter ‘000000’ for confirmation then proceed.
Phase 2: Get in ‘Download’ mode for repairing the Android device
Step 1: It’s important to put the Android device in ‘Download’ mode, here are the steps to do so –
- On a ‘Home’ button-less device – turn off the Tecno Spark 20 device and push down the ‘Volume Down’, ‘Power’ and ‘Bixby’ buttons for about 10 seconds and un-hold. Now, hit the ‘Volume Up’ button to get into ‘Download’ mode.
- For a device with ‘Home’ button – switch it off and hold down the ‘Power’, ‘Volume Down’ and ‘Home’ buttons together for 10 seconds and release. Click the ‘Volume Up’ button for entering ‘Download’ mode.
Step 2: Press ‘Next’ for initiating firmware downloading.
Step 3: Dr.Fone –Repair (Android) starts Android repair as soon as download and verification of firmware is done. All Android issues along with Android stuck in factory mode will be fixed now.
Glarysoft File Recovery Pro - Helps to recover your lost file/data, even permanently deleted data.
Part 4. Common Solutions to Exit Factory Mode on Android
Having a backup of all your data will eliminate the risk of losing any of your data. You can now safely exit factory mode using one of the 2 methods below. These two methods will work on a rooted device.
Method 1: Using “ES File Explorer”
To use this method, you will need to have installed file explorer on your device.
Step 1: Open “ES File Explorer” and then press the icon on the top left corner
Step 2: Next, go to “Tools” and then turn on “Root Explorer”
Step 3: Go to Local> Device> efs> Factory App and then open factorymode as text in the “ES Note Editor” Turn it ON
Step 4: Open keystr as text in the “ES Note Editor” and change it to ON. Save it.
Step 5: Reboot the Tecno Spark 20 device
Method 2: Using Terminal Emulator
Step 1: Install Terminal emulator
Step 2: Type “su”
Step 3: Then Type the following;
rm /efs/FactoryApp/keystr
rm /efs / FactoryApp/ Factorymode
Echo –n ON >> / efs/ FactoryApp/ keystr
Echo –n ON >> / efs/ FactoryApp/ factorymode
chown 1000.1000/ efs/FactoryApp/keystr
chown 1000.1000/ efs/FactoryApp/ factorymode
chmod 0744 / efs/FactoryApp/keystr
chmod 0744 / efs/ FactoryApp/ factorymode
reboot
You can also exit factory mode on unrooted device by going to Settings> Application manager> All and the search for Factory Test and “Clear Data”, “Clear Cache”
As much as factory mode can be a useful solution to a number of problems, it can be quite annoying when it pops up unexpectedly. Now you are equipped with 2 effective solutions to help you safely exit factory mode if ever you find yourself in this situation.
Bricked Your Tecno Spark 20? Here’s A Full Solution
A bricked phone is a device that won’t turn on no matter what you do and everything you try to do to fix it doesn’t work. Most people will tell you that there is really nothing you can do to fix a bricked device. But with the right information, the right buttons to push and useful additional software you can actually try to fix a bricked device.
In this article we are going to look at how you can fix your device if you are sure it is bricked, how to rescue the data on your bricked device and even how you can avoid this situation in the future.
Part 1: Rescue the data on your Bricked Android Phone
Before we can learn how to fix a bricked device, it is important that you are able to save the data that is on the Tecno Spark 20 device. Having the data saved somewhere else will be the added insurance you need in case anything goes wrong during the process. There are very few software solutions in the market to help you get back data from a bricked device. One of these and the most reliable is Wondershare Dr.Fone - Data Recovery (Android) .
Dr.Fone - Data Recovery (Android)
World’s 1st Android smartphone and tablet recovery software.
- Recover data from broken Android in different situations.
- Scan and preview files before starting the retrieval process.
- SD card recovery on any Android devices.
- Recover contacts, messages, photos, call logs, etc.
- It works great with any Android devices.
- 100% safe to use.
4,771,974 people have downloaded it
How to Use Dr.Fone - Data Recovery (Android) to Rescue Data from a Bricked Android
If your device is completely unresponsive, don’t worry Dr.Fone can help you get all the data back. Simply follow these steps to gain access to the Tecno Spark 20 device and recover all your data.
Step 1: Download and install Wondershare Dr.Fone to your PC. Launch the program and then click on Data Recovery. Select the data types you would like to recover and then click on Next.
Step 2. Select the issue type for your phone. Choose from “Touch screen not responsive or cannot access the phone” or “Black/broken screen”.
Step 3: In the next step, you need to select your device model. If you don’t know the model of your device click on “How to check the Tecno Spark 20 device model” to get help.
Step 4: The next screen will provide instructions on how to enter “Download mode.” Connect the Tecno Spark 20 device to your PC once it is in “Download Mode”
Step 5: The program will begin an analysis of your device and then download the recovery package.
Step 6: Then Dr.Fone will display all the recoverable file types. You can click on the files to preview them. Select the ones you need and click on “Recover to Computer” to save them to your computer.
Part 2: How to Fix Your Bricked Android Phone
Android devices are usually very flexible in allowing users to flash ROM but sometimes an incorrect process can result in a bricked device. While there are few solutions to this problem, here are a few things you can do;
When the Tecno Spark 20 device Boots Straight into Recovery
If the Tecno Spark 20 device can boot to the recovery screen, you can find an alternative ROM to install and copy it your device. Installation can then be done in the recovery menu. If the Tecno Spark 20 device is booting to recovery mode there is a chance that it can be fixed.
Step 1: Load up Clockworkmod or any other recovery tool that you have been using.
Step 2: Once you are in, navigate to the “Reboot system now.” If you are using Clockworkmod, this should be your first option. Hopefully everything will work just right if you do this, If it doesn’t you may need to download and re-flash the ROM again.
When the Tecno Spark 20 device won’t stop rebooting
Here’s what to do if the Tecno Spark 20 device wont stop rebooting.
Step 1: Turn off the Tecno Spark 20 device and then reboot in recovery mode.
Step 2: Go to “Advanced” which will bring up a number of options to choose from.
Step 3: One of the options should be “Wipe Dalvik cache” select this option and then follow the instructions. When finished select “Go Back” to return to the main menu.
Step 4: Go to the “Wipe Cache Partition” and select it.
Step 5: Go to “Wipe data/ factory reset.”
Step 6: Finally reboot the Tecno Spark 20 device by selecting “Reboot system now.” This should fix the problem. You may also want to flash the same ROM or try a new one.
If the above methods don’t work, try one of the following options.
You can return to resource where you found the flash tools and search or ask for advice
Sometimes these errors can be caused if the ROM installation was performed via SD card. In this case reformatting the SD card might help.
If all else fails, it is time to returning the Tecno Spark 20 device to the vendor if your warranty is still applicable.
Part 3: Useful Tips to avoid Bricking your Android Phone
If you are planning on installing custom ROM you need to install Custom Recovery. This will enable you restore the Tecno Spark 20 device to its original settings should anything go wrong and hopefully help you avoid bricking your device.
- Ensure that you are familiar with the Fastboot or ADB commands before doing anything. You should know how to recover your device by flashing a command line and also manually transfer important files to your device.
- Make a backup of your device. This is obvious but most people fail to adhere to it. At the very least you can get back all your files and settings to transfer to a new phone.
- Keep a full Nandroid backup on your phone
- Keep another backup on your PC which you can access should anything go wrong with the Custom ROM installation
- Know how to hard reset your device. It may come in handy when your device freezes on you.
- You should also consider enabling USB debugging. This is because many solutions for a Bricked device rely on USB debugging.
- Ensure the Custom ROM you choose can actually be used on your device model.
While installing Custom ROM can actually be a great way to customize your device, it is also the leading reason for bricked devices. Therefore ensure that you understand what you are doing when you decide to customize your device. Learn as much as you can about the process before attempting everything.
Strategies for Apps That Won’t Download From Play Store On Tecno Spark 20
The frustration of apps not downloading in the Google Play Store can annoy users. A seamless download experience is crucial for user satisfaction and app success. When you encounter such issues, they disrupt the interaction expected from your device.
The inconvenience can impact user trust and the overall perception of an app’s reliability. Addressing these challenges is crucial to maintaining a satisfied user experience and ensuring the success of apps on the platform. Explore the article below to learn what to do when apps not downloading from the Play Store issue appears.
Part I. 7 Usual Reasons Behind Apps Not Downloading in Google Play Store
The reasons below collectively contribute to the frustration users experience when apps are unable to download from the Play Store:
Video Converter Factory ProConnectivity Issues
Slow or unstable internet connections can interfere with the download process. It often leads to failed or delayed app installations. You will experience frustration when faced with connectivity issues, impacting your ability to access desired apps.
vMix Basic HD - Software based live production. vMix Basic HD includes 4 inputs, 3 cameras, streaming, recording, playlist.Insufficient Storage
Limited available storage on the Tecno Spark 20 device prevents the installation of new apps. Users may find it challenging to manage their storage effectively. It can hinder the expansion of your app library and impact the overall device functionality.
Outdated Play Store Version
Running an outdated version of the Play Store can cause compatibility issues with the newest versions of apps. You’ll miss out on new features and improvements, affecting the overall user experience and the efficiency of the Play Store.
Google Account Authentication Problems
Issues with verifying Google accounts can restrict access to the Play Store. It prevents you from downloading or updating apps. Authentication problems pose a significant barrier, impacting your ability to stay current with app versions.
App Download Restrictions
Device settings or parental controls may impose restrictions on certain app downloads. You may encounter limitations in accessing specific apps. It can affect the Tecno Spark 20 device’s versatility.
Incorrect Date and Time Settings
Inaccurate date and time settings on the Tecno Spark 20 device can disrupt the Play Store’s functionality. You’ll face obstacles in downloading apps due to authentication errors or syncing issues. It can have a negative impact on the overall user experience.
Play Store Bugs and Glitches
Technical issues within the Play Store, such as bugs or glitches, can lead to failed downloads. You may encounter unexpected errors, causing uncertainty and potential distrust in the reliability of the app platform.
If you encounter any of these issues, having a reliable tool to fix them is essential. Wondershare Dr.Fone - System Repair offers a solution if you cannot download from the Play Store. The platform ensures you can download apps again with a high success rate in minutes.
Part II. Having a Third-Party Tool Is Essential To Safeguard Your Apps
Dr.Fone - System Repair is a dependable alternative offering a comprehensive solution to various Android-related problems. Its key features set it apart, making it an essential asset for users facing app download challenges.
safe & secure
4,307,222 people have downloaded it
Key Features
The summarized points show why Dr.Fone is a flexible and powerful tool for Android users with various phone models.
Supports up to 1000+ Android Models
Dr.Fone System Repair boasts compatibility with a vast range of Android models. It provides a universal solution for users regardless of their device. The extensive support ensures that users with diverse Android devices can rely on the tool for effective issue resolution.
Fixes All Kinds of Android Problems in Minutes
The tool is designed to address a wide array of Android problems. Whether it’s connectivity issues, authentication problems, or glitches within the Play Store, Dr.Fone - System Repair solves these issues within minutes. Its efficiency in tackling diverse problems makes it a valuable asset for users seeking a quick and reliable solution.
High Success Rate Without Data Loss
One of the standout features of Dr.Fone - System Repair is its high success rate in problem resolution without causing data loss. You can have confidence that your apps and important data remain intact throughout the repair process. It ensures a smooth solution and maintains the integrity of the user’s device and data.
When grappling with persistent issues hindering app downloads on the Google Play Store, having a reliable third-party tool becomes essential to safeguard your apps and ensure a seamless user experience. The next section will show you how to use the platform to fix the apps not downloading in the Google Play Store problem.
Part III. First Choice: Use Dr.Fone - System Repair for App Downloading Issues
Using Dr.Fone - System Repair to resolve app downloading issues is straightforward. Here are three simple steps to effectively address app-related challenges:
**Note:**It is highly recommended that you back up your Android data before using Dr.Fone for Android repair.
- Step 1: Download and install Dr.Fone - System Repair on your computer. Launch the program and select System Repair from the available options.
safe & secure
3,143,540 people have downloaded it
- Step 2: Connect your Tecno Spark 20 to the computer using a USB cable. Dr.Fone will detect your device, and you’ll be prompted to choose your device’s type. Select Android Repair.
- Step 3: Follow the on-screen instructions until the app downloads the correct firmware for your device. As it downloads, Dr.Fone will verify it and put your device details on display. You can install the firmware on your Tecno Spark 20 by choosing Fix Now.
Step 4: Initiating the system repair process will be accompanied by a progress bar visible on the screen. Upon completion, a prompt window will emerge, presenting a completion message.
If you can download apps successfully, click Doneto close the tool.
If the problem persists, select TryAgain to rerun the process.
Take advantage of PREMIUM features.
If you can’t download Dr.Fone for some reason, you can try these common fixes to try to resolve your app download issues on your device
Part IV. 8 Other Methods of Resolving Common App Downloading Issues
Here are 8 other methods to troubleshoot and resolve common app downloading problems:
Check Internet Connection
A stable internet connection is essential for downloading apps. Do an Internet signal check to ensure you are connected to a reliable Wi-Fi network or have a strong mobile data signal. If the connection is weak, consider switching to a more robust network.
Free Up Storage Space
Insufficient storage on your device can hinder app installations. Navigate to the Tecno Spark 20 device settings, access the Storage section, and clear unnecessary files or apps. Creating more space ensures a smoother download experience.
Glarysoft File Recovery Pro Annually - Helps to recover your lost file/data, even permanently deleted data.Update the Play Store
An outdated Play Store version may lead to compatibility issues. Open the Google Play Store, go to Settings, and tap the Play Store version. If an update is available, install it to ensure compatibility with the latest apps.
Clear Play Store Cache and Data
Cached data in the Play Store can sometimes cause download problems. Head to the Tecno Spark 20 device settings and open Apps or Application Manager. Locate Google Play Store, and tap Storage. Clear both the cache and data to refresh the app.
HD Video Converter Factory Pro
Verify Google Account
Authentication issues with your Google account can prevent app downloads. Confirm that your Google account is properly verified. Go to the Tecno Spark 20 device settings, select Accounts, and ensure your Google account is active and synced.
Check Date and Time Settings
Incorrect date and time settings may disrupt the authentication process. Verify that your device’s date and time are set correctly. Enable automatic date and time settings to ensure accuracy.
Review Download Restrictions
Device settings or parental controls might impose restrictions on certain app downloads. Examine the download restrictions in the Tecno Spark 20 device settings and adjust them accordingly to allow for the installation of desired apps.
Restart the Tecno Spark 20 device
Sometimes, a simple restart can resolve various issues. Power off your device, wait a few seconds and then power it back on. This can help refresh system processes and eliminate temporary glitches.
Conclusion
Ensuring a smooth app download experience demands attention to various factors. From connectivity to storage management, each step contributes to resolving download challenges. The careful review of date/time settings and download restrictions further enhances the process when you cannot download from the Play Store.
For persistent issues, consider Dr.Fone - System Repair. The app is a viable option, providing a comprehensive approach. Embracing these measures ensures you can easily fix apps that won’t download from the Play Store. Having a reliable tool beside you also fosters an uninterrupted and enjoyable downloading journey from the Play Store.
- Title: How to Exit Android Factory Mode On Tecno Spark 20? | Dr.fone
- Author: Nova
- Created at : 2024-07-19 22:38:21
- Updated at : 2024-07-20 22:38:21
- Link: https://change-location.techidaily.com/how-to-exit-android-factory-mode-on-tecno-spark-20-drfone-by-drfone-fix-android-problems-fix-android-problems/
- License: This work is licensed under CC BY-NC-SA 4.0.