Home Button Not Working on Tecno Pova 5 Pro? Here Are Real Fixes

There is no doubt that it is quite frustrating when your device buttons, such as home and back don’t work properly. The reasons can be software as well as hardware issues. If you are wondering whether there is any solution to fix this problem, then you’ve come to the right place. Firstly, yes some methods can probably help you to come out of this issue. Here, in this guide, we have covered various solutions you can try to resolve the “home button not working Android” problem no matter whether it is due to software or hardware reason.

Part 1: 4 Common Measures to Fix Home Button Not Working Android

Here, we are going to mention four common methods that you can try to resolve the home button problem on your Tecno Pova 5 Pro with ease.

1.1 One click to fix Android Home Button Not Working

[Try It Free](https://download.wondershare.com/drfone_repair_full3371.exe)

When it comes to the home button not working Tecno Pova 5 Pro problem, the most common reason is the unknown system issues. In such a scenario, the best solution is using Dr.Fone - System Repair (Android) software to repair your Android system to normal in one click. This tool is powerful enough to resolve various Android issues within a few minutes.

Dr.Fone - System Repair (Android)

Android repair tool to fix home button not working on Android

The tool can help you to fix the Android operating system in a wide range of scenarios.
It is compatible with all Tecno Pova 5 Pro devices.
There is no need for technical skills to use the software.
The software comes with a high success rate for fixing the Android system.
It provides easy steps to resolve Android issues.

3981454 people have downloaded it

To learn how to fix home button not working problem, download and install the Dr.Fone - System Repair (Android) software on your computer, follow the below step-by-step guide:

Step 1: To begin with the process, launch the software on your computer and select the “System Repair” option from the software main window.

Step 2: Thereafter, connect your Tecno Pova 5 Pro to the computer using a USB cable and select the “Android Repair” tab from the left menu.

Step 3: Next, you will navigate to a device information page where you have to provide your device information.

Step 4: After that, the software will download the appropriate firmware to repair your Android system.

Step 5: After downloading the firmware, the software will start the repair process. Wait for a few seconds, the problem should get fixed and your phone will get back to its normal state.

1.2 Force Restart your Android

Whenever you encounter with Android virtual soft keys, not working problem, the first thing you should try is to force restart your phone . If the problem is due to a software issue, then it can be probably fixed by simply force restarting your Android.

Here are simple steps on how to force restart on Android:

Step 1: To begin with, press and hold the power button and either volume up or down button at the same time until your device screen goes off.

Step 2: Next, press the power button for a few moments to force restart your device.

1.3 Restore Factory Settings

If force restarting won’t help you to fix the problem you are facing, it’s time to reset your Tecno Pova 5 Pro to factory settings. The factory reset on an Android device will erase all of your phone settings, third-party apps, user data, and other app data to restore your device to its original manufacturer condition or settings. It means that this can bring back your device to its normal state.

To learn how to restore factory settings, follow the below steps:

Step 1: Go to your ‘Settings” and then, go to “System”>” Advanced”>” Reset options”.

Step 2: Next, tap on “Erase all data”>” Reset phone” to factory reset on your phone. Here, you may need to enter the password or pin or pattern.

Once you are done with the above steps, restart your phone and restore your data and this might be fixed the problem for you. If not, then try the next solution.

1.4 Update Android Firmware

It might be the case that your Android firmware is not updated and that’s why you are experiencing the home button not working Android problem. Sometimes, not updating your Android firmware can cause various issues and problems while using your device. So, you should update it, and here are steps on how to do it:

Step 1: Open the Settings and then, go to “About device”. Next, click “System updates”.

Step 2: After that, click “Check for updates” and if updates are available, then download and install it to update your Android version.

Part 2: What if the Home Button fails due to hardware reasons?

When your Android home and back button not working because of hardware reasons, you can’t get the problem resolved by simply rebooting your device. In such cases, you have to use alternative apps to replace the home button.

2.1 Simple Control app

The Simple Control app is the first and foremost solution to fix the Android home button not working issue. With the help of this app, you can fix many soft keys of your device. It is specially designed for Android users facing trouble using home, volume, back, and camera buttons. Plus, the app utilizes Accessibility service, but it doesn’t get access to your sensitive and personal information.

Pros:

It can easily replace broken and failed buttons.
The app is quite easy to use.

Cons:

It is not as much efficient as other similar apps available out there.

URL: https://play.google.com/store/apps/details?id=ace.jun.simplecontrol&hl=en_US

2.2 Button Savior app

Button Savior app is one of the ultimate apps that can help you to fix the Android home button not working problem with ease. For this app, root and no root versions are available on the Google Play store. To fix the Home button not working issue, no root version is the right one. But, if you want to fix the Back button or other buttons, then you need to go for the root version.

Pros:

It comes with a root as well as no root version.
The app is powerful enough to fix a wide range of buttons.
It shows information regarding the date and time and battery.

Cons:

The root version of the app can cause data loss.

URL: https://play.google.com/store/apps/details?id=com.smart.swkey" target="_blank” rel=”nofollow

Navigation Bar app is another great solution to fix the home button not responding problem. It can replace broken and failed button for users who are facing difficulty using navigation bar panel or buttons not working properly. The app offers numerous features, and it is easy to use.

Pros:

It offers many colors to make an incredible navigation bar.
The app provides 15 themes for customization.
It comes with the ability to change the size of the navigation bar.

Cons:

Sometimes, the navigation bar stopped working.
It comes with ads.

URL: https://play.google.com/store/apps/details?id=nu.nav.bar

2.4 Home Button app

Home button app is another remarkable solution to replace broken and failed home buttons for users having trouble while using buttons. With this app, it is quite easy to press or even long press on the home button as assistive touch.

Pros:

You can change the button of color using the app.
With the help of it, you can set a vibrate setting on touch.
It provides support for many press actions, such as home, back, power menu, etc.

Cons:

It doesn’t come with a lot of features, unlike other apps.
Sometimes, it shuts down automatically.

URL: https://play.google.com/store/apps/details?id=nu.home.button

2.5 Multi-action Home Button app

Is your Android physical home button is broken or dead? If yes, then the Multi-action Home Button app can help you to fix it with ease. With the help of it, you can create a button in centre-bottom of your device screen, and you can also add numerous actions to that button.

Pros:

It provides various actions with the button.
It is very simple and easy to use.

Cons:

The app’s very useful feature comes with its pro version.

URL: https://play.google.com/store/apps/details?id=com.home.button.bottom

Conclusion

Hopefully, the methods covered in this post helps you to fix Android home and back button not working problem for you. If it is a system issue, then the best thing you can do is to take advantage of Dr.Fone - System Repair (Android) software. It can surely help you to fix your Android system to normal within a few minutes.

Stuck at Android System Recovery Of Tecno Pova 5 Pro ? Fix It Easily

In this article, you will learn what is Android system recovery, and how to fix Android stuck at system recovery step by step. To get out of Android system recovery more easily, you need this Android repair tool.

You know your Tecno Pova 5 Pro is stuck in recovery mode when you cannot turn on the Tecno Pova 5 Pro device. If you try to turn it on, it shows a message that says, “Android System Recover.” This situation can be quite debilitating for most Android users. Most of the time, you don’t know whether you have lost all of your important Android data. It is even more worrying because of the fact that you cannot turn on your device at all, especially when you don’t know how to fix it.

Part 1. What is Android System Recovery?

Despite all the worry that surrounds an unwanted Android system recovery screen, it is actually a feature that can be quite helpful to your Tecno Pova 5 Pro when it’s needed. It can be useful when you want to hard reset the Android device without having to access the settings. This can be very useful if your device is not working very well or if your touch screen is experiencing problems. It can also be very helpful when you are having a problem accessing the settings on your device.

For these reasons, it is actually a good thing, although when it does happen unexpectedly, you may want to know how to fix it.

Part 2. How to get to Android System recovery

Now that you know how useful the Android System can be, you may want to know how to utilize this feature to get out of some of the problems we mentioned above. Here’s how you can safely get to the Android recovery system on your Tecno Pova 5 Pro.

Step 1: Hold down the power key and then select “Power Off” from the options on the screen. If, however, your screen is unresponsive, keep holding the power key for several seconds until the Tecno Pova 5 Pro device is completely turned off.

Step 2: Next, you need to hold down the Power and the Volume Key. You should able to see the Android image and a bunch of information about your device. There should also be a “Start” at the top right corner of the screen.

Step 3: Press the Volume up and Volume down keys and use the Power key to select menu options. Press the Volume down key twice to see “Recovery Mode” in red at the top of the screen. Press the Power key to select it.

Step 4: The white Google logo will appear immediately followed by the Android logo again as well as the words “No Command” at the bottom of the screen.

Step 5: Finally, press and hold both the Power and the Volume up Key for around 3 seconds and then let go of the Volume up Key but keep holding the Power Key. You should see the Android system recovery options at the top of the screen. Use the Volume keys to highlight and the Power key to select the one you want.

Part 3. Android Stuck at System Recovery? How to fix in one click?

Sometimes during the System Recovery process, the process can glitch, and you’ll lose data on your device, rendering it unusable. However, another solution to fix this is to repair your device using the Dr.Fone - System Repair tool.

Dr.Fone - System Repair (Android)

One-stop solution to fix Android stuck at System recovery

It’s the #1 software for PC-based Android repair
It’s easy to use with no technical experience required
Supports all latest Tecno Pova 5 Pro devices
Easy, one-click fix Android stuck at system recovery

3981454 people have downloaded it

Here’s a step by step guide on how to use it yourself;

Note: Be aware that this process can erase all your personal files on your device, so ensure you’ve backed up your Tecno Pova 5 Pro before continuing.

Step #1 Head over to the Dr.Fone website and download the software for your Windows computer.

Once installed on your computer, open onto the main menu and connect your Tecno Pova 5 Pro using the official USB cable. Select the System Repair option.

Step #2 Select the ‘Android Repair’ option from the next screen.

Insert your device information, including the brand, carrier details, model and country and region you’re in to ensure you’re downloading the correct firmware.

Step #3 Follow the onscreen instructions on how to put your device in Download Mode.

Your device should already be in this mode but follow the instructions to make sure. There are methods available for devices, both with and without home buttons.

Step #4 The firmware will now start downloading. You’ll be able to track this process in the window.

Ensure your device, and your computer stays connected the entire time, and make sure your internet connection remains stable.

After downloading, the software will automatically start to repair your device by installing the firmware. Again, you can track the progress of this on the screen, and you’ll need to ensure your device remains connected throughout.

You’ll be notified when the operation is complete and when you’re able to disconnect your phone and use it as normal, free from it being stuck on the Android system recovery screen!

Part 4. Android Stuck at System Recovery? How to fix in a common way?

If, however, your device is stuck on system recovery mode, here’s how you can easily get it out of system recovery. The process is slightly different for different Android devices, so you should check your device’s manual before attempting this process.

Step 1: Power off the Tecno Pova 5 Pro device, and just to be sure, take out the battery to ensure that the Tecno Pova 5 Pro device is fully turned off. Then reinsert the battery.

Step 2: Press and hold down the Home button, Power Button, and the Volume up Key simultaneously until the Tecno Pova 5 Pro device vibrates.

Step 3: Once you feel the vibration, release the power button but continue to hold down the Home and Volume up Key. The Android recovery screen will display. Release the Volume up and Home buttons.

Step 4: Press the Volume down key to select the “Wipe Data/ Factory Reset option and then press the Power button to select it.

Step 5: Next, you need to press the Volume down button to highlight “Delete All User Data” and then press the Power button to select it. The device will reset and present the “Reboot System Now” option.

Step 6: Finally, press the Power button to reboot the phone in normal mode.

Part 5. Backup and Restore Android System

Losing data on your Tecno Pova 5 Pro is a common occurrence, and since Android devices don’t really have an automatic full backup solution, it is important to know how to backup and restore your device system. Here’s how to easily do that.

Step 1: Enter the recovery mode on your Tecno Pova 5 Pro, as described in Part 2 above. Use the Volume and Power keys to select the “Backup & Restore” option on the screen.

Step 2: Tap on the backup option or use the Volume and Power keys if your screen is unresponsive. This will begin backing up your system to the SD card.

Step 3: After the process is complete, choose “Reboot” to restart the Tecno Pova 5 Pro device.

Step 4: You can then simply check Recovery > backup directory on your SD card. You can rename it to easily find it later during the restore process.

To restore the system from the backup created, follow these simple steps.

Step 1: Once again, enter recovery mode as described in part 2 above and then choose Backup & Restore from the menu list.

Step 2: Press “Restore” to begin the recovery process from the Backup file we created

Step 3: You will be notified when the system restore is complete.

Android system recovery mode can be quite useful, especially when your system is unresponsive. As we have also seen, it is important to know how to get into and out of System Recovery mode if you are going to backup and restore your Android system. It is also quite easy to do both of these things.

Fix Can’t Take Screenshot Due to Security Policy on Tecno Pova 5 Pro

“Can’t take screenshots due to security policy” is a screenshot restriction on your Android smartphone. You’ve probably seen this error message before, especially when taking screenshots of banking or video streaming apps. But why do apps and websites block screenshots? It’s actually for your good.

Screenshots can be misused to steal money or pirate copyrighted content. By prohibiting screenshots, apps and websites can help to protect your data and privacy. If you want to learn more, keep reading. This article will explain why apps and websites prevent screenshot capture and why it’s important for security. We’ll also give you tips on how to take photos of apps and websites that don’t let you take screenshots.

Part 1. Can’t Take Screenshots Due to Security Policy on Android? Here’s Why

Why can’t you take a screenshot of something on your phone and get the error message that says, “Can’t take screenshot due to security policy”? Apps and websites turn off or remove the screenshot feature for a variety of reasons, including:

Device Restrictions

Lots of workplaces and schools have rules against taking screenshots on devices used for work or school. Organizations do this to protect sensitive information and prevent data breaches.

Protect Sensitive Information

Say you’re trying to take a screenshot on your Tecno Pova 5 Pro device, and you get the notification “Can’t take screenshot due to security policy.” Tecno Pova 5 Pro smartphones are not necessarily the problem.

Some apps and websites, such as banking apps, store private data like financial and credit card details. Blocking capturing screenshots is a way to prevent unauthorized access to confidential information.

Follow Regulations

Some industries and organizations have regulations that need them to protect sensitive data. Financial institutions must protect their customers’ financial information, for example. Disabling screenshots is one way to follow these regulations.

DRM-Protected Content

Android can’t take screenshots due to security policy, especially to prevent piracy. Piracy is the distribution of copyrighted material without permission. It can harm businesses that depend on copyright protection.

To prevent this, you can use DRM (digital rights management) to protect copyrighted content. DRM-protected content cannot be screenshotted or copied.

Prevent Fraud

Scammers and other criminals often use screenshots to commit fraud. For instance, people might send fake screenshots to trick others into sharing personal details or money. Disabling screenshots can help to prevent this type of fraud.

Protect Intellectual Property

Many businesses and organizations have valuable information they want to keep safe, such as trade secrets. Disabling screenshots can be helpful to prevent the theft of this intellectual property.

Protect User Privacy

Some apps and websites allow users to share private information. Some apps, like messaging apps, let users share private info. But there are limits.

You can’t take screenshots due to security policy Whatsapp features, View Once media option. This method stops people from taking pictures of private media chats, protecting users’ privacy.

You Are Using a Secure Folder

Companies design secure folders to protect your most sensitive data from unauthorized access, so screenshots are not allowed within them.

Part 2. 8 Ways To Take Screenshots When You Can’t Due to Security Policy

If you’re trying to take a screenshot of an app or website with a security policy in place, there’s usually no way to circumvent it. However, there are a few things you can do to take pictures of these apps and website content.

Enable Screen Capture on Android

Sudden “can’t take screenshot due to security policy” notifications, failing to take a screenshot, and a Tecno Pova 5 Pro user?

If you are using this Android device, you can enable the screen capture feature in the Settings app.

Step 1: Go to Settings > Apps, then tap the More options icon in the upper right corner.

Step 2: Choose Special access > All files access.

Step 3: Enable Tecno Pova 5 Pro capture.

Once you have enabled screen capture, you can check if you can take screenshots of any app or website.

Enable Screenshots in Incognito Mode

Apps and websites may prohibit screenshots in incognito mode to protect your privacy. However, you can enable the Incognito Screenshot experimental flag in Chrome to bypass this restriction.

Step 1: Open Chrome on your Tecno Pova 5 Pro and type “chrome://flags” in the address bar.

Step 2: Search for Incognito Screenshot and choose Enabled from the drop-down menu.

Step 3: Tap Relaunch on the lower right corner of the screen.

Once Chrome has relaunched, you should be able to take screenshots in incognito mode by pressing the power and volume-down buttons at the same time.

Use Google Assistant

With Google Assistant, taking screenshots on your Tecno Pova 5 Pro is now easier than ever. Just say, “Hey, Google, take a screenshot,” Google Assistant will capture the screen and save it to your gallery.

Use a Third-Party App To Take Screenshots

You can download several applications on Google Play Store if you still can’t take a screenshot due to security policy. Some popular third-party screenshot apps include:

Screenshot Easy
Screenshot Tile
Screen Master: Screenshot Markup

Third-party screenshot apps often use different methods to capture the screen. These might bypass the security measures that prevent you from taking screenshots with the built-in screenshot function.

Capture Your Phone Display With Another Device

If you own another smartphone, you can use it to take a photo of the screen of the Tecno Pova 5 Pro device you’re trying to take a screenshot of. This is a simple workaround for any security policies that may be in place. To do this, open the camera app on your other smartphone and point it at the screen of the first device.

Check the Banking App Settings for Screenshot Permissions

Some banking apps may turn off screenshots by default, but some may allow them in the settings. To check this, open the banking app and select the settings menu. Look for a setting that allows taking in-app photos. If you find it, enable it to allow screenshots to be taken in the app.

Screen Mirroring

Smart View allows you to display your Tecno Pova 5 Pro device’s screen on your smart TV, where you can then take a screenshot of the TV to capture the app or website you need.

Step 1: Swipe down the top of the screen to access the Quick Settings panel.
Step 2: Tap the Smart View icon.
Step 3: Select your TV from the list of available devices and tap Start Now.

Alternatively, if you don’t have a smart TV, you can still mirror your phone screen display to your desktop or tablet using the Tecno Pova 5 Pro Flow app and take a screenshot of your phone’s screen instead.

Use Disable Flag Secure Magisk Module

Still experiencing the error message, “Can’t take screenshot due to security policy?” Bypass Android phone error like this using a module.

The module patches the Android framework to remove the FLAG_SECURE flag from apps. It is a relatively simple process but requires root access and Magisk. This module will turn off the security flag to take screenshots in Incognito mode and other apps.

Authors Verdict

There are a few ways to bypass screenshot restrictions on Android apps and websites, but some methods are more complicated than others. All methods should work, but if you think your device has been compromised, it is important to check if it is a system issue.

You can use a third-party tool like Wondershare Dr.Fone without rooting your device. It is easy to use and supports many Android smartphones. You can try Dr.Fone for free to test if it supports your device and can fix the underlying system issues.

Part 3. Dr.Fone: A Comprehensive Solution for Fixing Android System Issues

Dr.Fone’s System Repair tool for Android cannot bypass the security apps of banking apps and video streaming apps like Netflix. This is because these apps use sophisticated security measures to protect their users’ data.

However, Dr.Fone System Repair tool for Android can fix a wide range of other Android system issues that might happen from installing third-party apps on your smartphone, such as:

Follow this step-by-step guide and learn how to use Dr.Fone to scan your Android smartphone for system issues and repair them.

Step 1: Once you have downloaded Dr.Fone, install it and launch it on your desktop. Then, connect your Tecno Pova 5 Pro to your desktop using a USB cable.

safe & secure

3,567,199 people have downloaded it

Step 2: From the Toolbox homepage, select System Repair > Android.

Step 3: Click Start on the new window.

Step 4: Select an option from the Name, Model, Country, and Carrier in the drop-down lists. Next, select the checkbox to agree with the warning, then click Next in the bottom right corner.

Step 5: Follow the in-app instructions to put your Tecno Pova 5 Pro on Download mode, then click Next.

Step 6: Wait while the firmware automatically downloads.

Step 7: Review the details on the screen and click Fix Now to install the firmware on your smartphone.

Step 8: Read the dialogue box note, enter the code in the input box, and click Confirm.

Step 9: Keep your smartphone connected and avoid using it while Dr.Fone is repairing it.

Step 10: If your device has started properly, click Done to close this app. Otherwise, click Try again.

Conclusion

You can fix the “Can’t take screenshot due to security policy” error on Android in different ways. But it depends on the cause of the error. If an app is causing the error, you can try two things. First, remove the app’s screenshot restriction. Second, download a different screenshot app or a different device to take screenshots.

Although there are ways to bypass the “Can’t take screenshot due to security policy” error message, it’s crucial to know why screenshots are not allowed. Many apps and websites do not permit it to protect sensitive information, prevent piracy, and follow regulations. They also do it to prevent fraud, protect user privacy, and safeguard intellectual property.

If you think the issue is with your Android system, or your device becomes bricked after trying other methods, experiencing app crashes, or otherwise malfunctioning, try using the Dr.Fone System Repair tool. It is worth trying and can fix most Android system issues in a few minutes.

Change Location

Home Button Not Working on Tecno Pova 5 Pro? Here Are Real Fixes | Dr.fone