Guide: How To Unbrick a Bricked Xiaomi Redmi Note 12 Pro 4G Phone

Xiaomi Redmi Note 12 Pro 4G phones are super popular thanks to their excellent features and affordable prices. But being so popular means people try to customize them with custom software. If you’re not careful, you might have a “bricked” Xiaomi Redmi Note 12 Pro 4G phone. It won’t work at all. It will be more like a brick than a smartphone.

Don’t worry, though. This guide is here to help. It will show you how to unbrick your phone step by step. You’ll learn to bring your phone back to life and make it work again. So, get started on fixing your bricked Xiaomi Redmi Note 12 Pro 4G phone by reading this article.

Part 1. Common Reasons Why Xiaomi Redmi Note 12 Pro 4G Phones Get Bricked

A bricked phone might sound like a techy term, but it’s pretty simple – when your Xiaomi Redmi Note 12 Pro 4G phone turns into a lifeless block that won’t do anything. In this section, you’ll learn all about why this happens, so you can avoid these issues and keep your phone alive as long as possible.

• Trying to flash incompatible ROMs. Sometimes, people want their Xiaomi Redmi Note 12 Pro 4G phones to run different software like a custom version of Android called a ROM. But if you use the correct ROM for your specific phone, it can mess things up nicely. Also, inexperience with ROM flashing can hard brickyour Xiaomi Redmi Note 12 Pro 4G Be sure to follow guides and ask for community help online.
• Rooting mishaps/failures.“Rooting” means giving your phone superpowers, but if you mess up, it can go wrong. Your phone might not boot up, leaving you with a brick. Like the previous bullet, follow guides carefully, especially if inexperienced.
• Failed Firmware Updates. When your phone asks you to update its software, following the instructions carefully is essential. If you interrupt the process or something goes wrong, your phone could be bricked.

Now, you must know about soft and hard-bricking to learn how to diagnose your phone. Soft bricking is like a phone’s bad day – it might not start up. However, with the right help, you can fix it. Hard bricking is worse. It’s when your phone is a paperweight – it won’t turn on, respond, or do anything useful.

Part 2. Method 1: Use the Xiaomi Redmi Note 12 Pro 4G Flash Tool To Recover Bricked Xiaomi Redmi Note 12 Pro 4G Phones

Say you’ve accidentally bricked your Xiaomi Redmi Note 12 Pro 4G phone due to rooting or ROM flashing. You might feel scared, but imagine having a magic wand that can fix your bricked phone. That’s what the Xiaomi Redmi Note 12 Pro 4G Flash Tool is –a dedicated Xiaomi Redmi Note 12 Pro 4G unbricking tool. It lets you install or flash different software onto your phone, giving it a fresh start. Most of the time, a simple firmware flash will unbrick your Xiaomi Redmi Note 12 Pro 4G.

The Xiaomi Redmi Note 12 Pro 4G Flash Tool is a superhero for various situations. Here are some scenarios where it can save the day:

• **Device Recovery.**If your phone is bricked or acting strange, the Flash Tool can help bring it back to life.
• Firmware Updates. You can use it to install official updates released by Xiaomi Redmi Note 12 Pro 4G, ensuring your phone runs smoothly.
• **Device Customization.**Want a different look for your phone? The Flash Tool can help you install custom ROMs or themes.
• **Bug Fixes.**Got pesky bugs or glitches? The Flash Tool can replace corrupted software to make your phone behave.
• Performance Enhancement. If your phone feels sluggish, the Flash Tool can boost its speed by flashing a new OS.

How To Use the Xiaomi Redmi Note 12 Pro 4G Flash Tool To Unbrick a Xiaomi Redmi Note 12 Pro 4G Phone

Now that you know what the Xiaomi Redmi Note 12 Pro 4G Flash Tool is all about, it’s time to learn how to use it. If you’ve bricked your Xiaomi Redmi Note 12 Pro 4G phone, follow the steps below:

• Step 1. Download the Xiaomi Redmi Note 12 Pro 4G Flash Tool and the stock firmware of your device on your computer.
• Step 2. Turn off your phone. Then, press and hold the Volume Down + Power Key simultaneously for 6-8 seconds. This will force your phone to enter the Fastboot mode.

• Step 3. Connect your phone to your computer using a cable when you see this screen flash.

• Step 4. Using the Xiaomi Redmi Note 12 Pro 4G Flash Tool, click Select. Then, locate the firmware files you downloaded earlier.

• Step 5. Click the refresh button until the flash tool recognizes your device. Then, click flash to replace the firmware. A text saying “success” should appear under the result column.

Congratulations! Your phone should be up and working after following these steps.

Part 3. Method 2: Wondershare Dr.Fone System Repair – Your One-Stop Shop for Unbricking Your Xiaomi Redmi Note 12 Pro 4G Phone

If you gave the Xiaomi Redmi Note 12 Pro 4G Flash Tool a shot and your phone is still not cooperating, don’t lose hope. Sometimes, the magic touch needs a slight variation. That’s where Dr.Fone comes into play. This dedicated software can work wonders when fixing various phone problems. It can even help in cases of bricked Xiaomi Redmi Note 12 Pro 4G phones involving software or firmware issues.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

• Fix your Android to normal, no skills required.
• Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
• The high success rate in resolving Android system issues.
• Compatible with a wide range of Android devices and OS versions
• User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

One of Dr.Fone’s most astonishing powers is its “System Repair” feature. This is where the real magic happens. If your Xiaomi Redmi Note 12 Pro 4G phone is bricked, it can help repair the underlying software glitches that caused the issue. Moreover, Dr.Fone brings a toolbox of features to the table, making it more than just a one-trick pony. Here are its key features:

• **Data Recovery:**If you’ve lost precious data, Dr.Fone can help recover it, even from a bricked phone.
• **Data Transfer:**You can quickly move data between devices, even if one is unresponsive.
• **System Backup & Restore:**Fone can help you create a backup of your phone’s system and restore it when needed.
• **Unlocking Tools:**If you’re locked out of your phone, Dr.Fone can help you regain access.

How To Use Dr.Fone System Recovery Feature To Unbrick a Xiaomi Redmi Note 12 Pro 4G Phone

Now that you know about Dr.Fone, it’s time to understand how to use it. Hopefully, it can save your bricked Xiaomi Redmi Note 12 Pro 4G phone from its problems. Follow the steps below:

• Step 1. DownloadDr.Fone from its official website , and launch it on your computer. After entering the Toolbox menu from the left panel, click System Repair. Make sure that your Xiaomi Redmi Note 12 Pro 4G phone is connected.
• Step 2. Select Android on the next screen.

• Step 3. Initiate the Android System Repair by clicking Start.

• Step 4. Confirm your device details. You can edit any details that might be wrong.

• Step 5. Put your phone into Download mode. Follow the guidelines for phones with or without home buttons. Your phone will begin downloading the dedicated firmware.

• Step 6. After downloading the firmware, verify and proceed with the installation by clicking Fix Now. Confirm firmware installation by typing “000000” into the text box in the appearing window. Click Confirm afterward.

• Step 7. After the process is finished, your phone should now be okay. Click Done.

Part 4. Best Practices/Tips Before Unbricking Your Phone

Before diving into the unbricking process, you must arm yourself with some tips and precautions to ensure your recovery journey is as smooth as possible. Here’s what you need to know:

• Backing Up Data: An Ounce of Prevention. Remember the golden rule: always back up your data before attempting any phone recovery. Unbricking might save your phone, but being safe is better than sorry.
• **Authentic Tools and Software: Stay on the Safe Side.**Using genuine and trustworthy tools is crucial when unbricking your Xiaomi Redmi Note 12 Pro 4G This applies especially to Dr.Fone, which you should only download from the official website. Additionally, when recovering your phone’s software, use authentic Xiaomi Redmi Note 12 Pro 4G ROMs (the operating system’s files).
• **Learning from Online Guides and Communities: Seek Guidance.**Navigating the unbricking process might seem daunting, but you’re not alone. There are many online guides, tutorials, and communities where people share their experiences and solutions.

Conclusion

So, there you have it – your guide to fixing a bricked Xiaomi Redmi Note 12 Pro 4G phone. Remember, bricking happens when your phone stops working. You won’t be afraid when that happens, as you learned about the Xiaomi Redmi Note 12 Pro 4G Flash Tool and Dr.Fone. They are your phone-saving superheroes that can unbrick even a hard-bricked Xiaomi Redmi Note 12 Pro 4G phone.

As a parting reminder, always keep a tool ready for emergencies. For this, choose Dr.Fone. It’s a super tool for all your phone problems. Give it a shot and be confident with your phone wherever you go and whatever you do with it.

safe & secure

3,052,835 people have downloaded it

Stuck at Android System Recovery Of Xiaomi Redmi Note 12 Pro 4G ? Fix It Easily

In this article, you will learn what is Android system recovery, and how to fix Android stuck at system recovery step by step. To get out of Android system recovery more easily, you need this Android repair tool.

You know your Xiaomi Redmi Note 12 Pro 4G is stuck in recovery mode when you cannot turn on the Xiaomi Redmi Note 12 Pro 4G device. If you try to turn it on, it shows a message that says, “Android System Recover.” This situation can be quite debilitating for most Android users. Most of the time, you don’t know whether you have lost all of your important Android data. It is even more worrying because of the fact that you cannot turn on your device at all, especially when you don’t know how to fix it.

Part 1. What is Android System Recovery?

Despite all the worry that surrounds an unwanted Android system recovery screen, it is actually a feature that can be quite helpful to your Xiaomi Redmi Note 12 Pro 4G when it’s needed. It can be useful when you want to hard reset the Android device without having to access the settings. This can be very useful if your device is not working very well or if your touch screen is experiencing problems. It can also be very helpful when you are having a problem accessing the settings on your device.

For these reasons, it is actually a good thing, although when it does happen unexpectedly, you may want to know how to fix it.

Part 2. How to get to Android System recovery

Now that you know how useful the Android System can be, you may want to know how to utilize this feature to get out of some of the problems we mentioned above. Here’s how you can safely get to the Android recovery system on your Xiaomi Redmi Note 12 Pro 4G.

Step 1: Hold down the power key and then select “Power Off” from the options on the screen. If, however, your screen is unresponsive, keep holding the power key for several seconds until the Xiaomi Redmi Note 12 Pro 4G device is completely turned off.

Step 2: Next, you need to hold down the Power and the Volume Key. You should able to see the Android image and a bunch of information about your device. There should also be a “Start” at the top right corner of the screen.

Step 3: Press the Volume up and Volume down keys and use the Power key to select menu options. Press the Volume down key twice to see “Recovery Mode” in red at the top of the screen. Press the Power key to select it.

Step 4: The white Google logo will appear immediately followed by the Android logo again as well as the words “No Command” at the bottom of the screen.

Step 5: Finally, press and hold both the Power and the Volume up Key for around 3 seconds and then let go of the Volume up Key but keep holding the Power Key. You should see the Android system recovery options at the top of the screen. Use the Volume keys to highlight and the Power key to select the one you want.

Part 3. Android Stuck at System Recovery? How to fix in one click?

Sometimes during the System Recovery process, the process can glitch, and you’ll lose data on your device, rendering it unusable. However, another solution to fix this is to repair your device using the Dr.Fone - System Repair tool.

Dr.Fone - System Repair (Android)

One-stop solution to fix Android stuck at System recovery

• It’s the #1 software for PC-based Android repair
• It’s easy to use with no technical experience required
• Supports all latest Xiaomi Redmi Note 12 Pro 4G devices
• Easy, one-click fix Android stuck at system recovery

3981454 people have downloaded it

Here’s a step by step guide on how to use it yourself;

Note: Be aware that this process can erase all your personal files on your device, so ensure you’ve backed up your Xiaomi Redmi Note 12 Pro 4G before continuing.

Step #1 Head over to the Dr.Fone website and download the software for your Windows computer.

Once installed on your computer, open onto the main menu and connect your Xiaomi Redmi Note 12 Pro 4G using the official USB cable. Select the System Repair option.

Step #2 Select the ‘Android Repair’ option from the next screen.

vMix Basic HD - Software based live production. vMix Basic HD includes 4 inputs, 3 cameras, streaming, recording, playlist.
This bundle includes Studio 200 for vMix from Virtualsetworks, HTTP Matrix 1.0 automation scheduler, and 4 introductory training videos from the Udemy vMix Basic to Amazing course.

Insert your device information, including the brand, carrier details, model and country and region you’re in to ensure you’re downloading the correct firmware.

Step #3 Follow the onscreen instructions on how to put your device in Download Mode.

Your device should already be in this mode but follow the instructions to make sure. There are methods available for devices, both with and without home buttons.

Step #4 The firmware will now start downloading. You’ll be able to track this process in the window.

Ensure your device, and your computer stays connected the entire time, and make sure your internet connection remains stable.

After downloading, the software will automatically start to repair your device by installing the firmware. Again, you can track the progress of this on the screen, and you’ll need to ensure your device remains connected throughout.

You’ll be notified when the operation is complete and when you’re able to disconnect your phone and use it as normal, free from it being stuck on the Android system recovery screen!

Part 4. Android Stuck at System Recovery? How to fix in a common way?

If, however, your device is stuck on system recovery mode, here’s how you can easily get it out of system recovery. The process is slightly different for different Android devices, so you should check your device’s manual before attempting this process.

Step 1: Power off the Xiaomi Redmi Note 12 Pro 4G device, and just to be sure, take out the battery to ensure that the Xiaomi Redmi Note 12 Pro 4G device is fully turned off. Then reinsert the battery.

Step 2: Press and hold down the Home button, Power Button, and the Volume up Key simultaneously until the Xiaomi Redmi Note 12 Pro 4G device vibrates.

Step 3: Once you feel the vibration, release the power button but continue to hold down the Home and Volume up Key. The Android recovery screen will display. Release the Volume up and Home buttons.

Step 4: Press the Volume down key to select the “Wipe Data/ Factory Reset option and then press the Power button to select it.

Step 5: Next, you need to press the Volume down button to highlight “Delete All User Data” and then press the Power button to select it. The device will reset and present the “Reboot System Now” option.

Step 6: Finally, press the Power button to reboot the phone in normal mode.

Part 5. Backup and Restore Android System

Losing data on your Xiaomi Redmi Note 12 Pro 4G is a common occurrence, and since Android devices don’t really have an automatic full backup solution, it is important to know how to backup and restore your device system. Here’s how to easily do that.

Step 1: Enter the recovery mode on your Xiaomi Redmi Note 12 Pro 4G, as described in Part 2 above. Use the Volume and Power keys to select the “Backup & Restore” option on the screen.

Step 2: Tap on the backup option or use the Volume and Power keys if your screen is unresponsive. This will begin backing up your system to the SD card.

Step 3: After the process is complete, choose “Reboot” to restart the Xiaomi Redmi Note 12 Pro 4G device.

Step 4: You can then simply check Recovery > backup directory on your SD card. You can rename it to easily find it later during the restore process.

To restore the system from the backup created, follow these simple steps.

Step 1: Once again, enter recovery mode as described in part 2 above and then choose Backup & Restore from the menu list.

Step 2: Press “Restore” to begin the recovery process from the Backup file we created

Step 3: You will be notified when the system restore is complete.

Android system recovery mode can be quite useful, especially when your system is unresponsive. As we have also seen, it is important to know how to get into and out of System Recovery mode if you are going to backup and restore your Android system. It is also quite easy to do both of these things.

How To Deal With the Xiaomi Redmi Note 12 Pro 4G Screen Black But Still Works?

With the advance of technology over the years, many of us rely on smartphones to communicate, work, and play. As such, it can be pretty concerning when your device begins to act strange like your phone screen suddenly went blank.

Whether you’re using an iPhone or an Android device, you’ll eventually encounter a problematic symptom like this. Therefore, this article will explore what to do when your phone screen goes black. After exploring below, you’ll learn the common causes of why your phone screen went black and how to fix it. Read on below to learn more.

Part 1: Why Did My Xiaomi Redmi Note 12 Pro 4G Screen Go Black but Still Works? Common Causes

Experiencing a cell phone blank screen is not exclusive to Android or iOS users. A phone screen not turning on happens all the time due to several factors that may or may not be out of your control. While they can be frustrating, here are some common causes you should know as to why your phone screen went black but still works.

A Drained Battery

The first thing that comes to mind when your phone screen suddenly goes black is you have a drained battery. Even though this is obvious, it’s still important to mention, as this is usually what most people encounter. To fix this problem, plug your smartphone into a charger and wait for your device to turn on again. If it works, then you just prevented a rather annoying experience.

App Troubles

If your phone is working, but the screen is black, there’s also a high probability that you are having an isolated issue with a particular application. An app could be loading something, which often happens for streaming apps such as YouTube, Netflix, Prime, and more, especially if you have slow internet connectivity.

Software Issues

A potential reason why your phone screen went black but still works could be because of your smartphone’s software. This problem suggests that your Xiaomi Redmi Note 12 Pro 4G is crashing, potentially freezing your device if not addressed immediately. If this is the cause, then your device is likely experiencing a critical system error, and you should directly try to reboot your phone.

Hardware Problem

If you dropped your phone, there’s a high chance the LCD connectors went loose due to the physical impact. If this happened to you, the phone might be working, but the screen is black due to the LCD cable dislodging. Another issue could be your phone got exposed to extreme temperatures. This can also cause a black screen but your phone is still on.

WonderFox DVD Ripper Pro

EaseText Audio to Text Converter for Windows (Personal Edition) - An intelligent tool to transcribe & convert audio to text freely

Part 2: How To Fix Black Screen on Your Phone

Here are four valuable methods you should know on what to do when your phone screen goes black on your iPhone or Android smartphone to get them working again.

Glarysoft File Recovery Pro - Helps to recover your lost file/data, even permanently deleted data.

Method 1: Force Restart your Android/iOS Smartphone

If your phone screen is black but still works, force restarting it is the easiest way to fix it. The following are the detailed steps for both Android and iOS devices.

How to Force Restart your Android Device

Here is how you force restart an Android device when your phone screen doesn’t turn on.

Step 1: Press and hold the Power and Volume Down buttons simultaneously.

Step 2: Hold the same buttons until your device restarts, and display the phone’s logo.

How to Force Restart your iOS Device

If you own the latest iPhone models, here are the method of restarting it from iPhone 8 up to 14.

Step 1: Press and immediately release Volume Up. Next, press and immediately release Volume Down.

Step 2: Press and hold Sleep/Wake until you see the Apple logo.

Note

If you own an iPhone 7, press and hold the Side button and Volume Down simultaneously until you see the apple logo.

Method 2: Uninstall or Update Outdated Applications

In some cases, your phone screen is black but still works because of installing incompatible apps on your iOS/Android device. If the installed app is frequently crashing, it may be the source of a blank cell phone screen. Uninstall the problem app to see if the black screen disappears or not.

Method 3: Inspect the LCD Connectors

If your phone screen goes black but still works, you should inspect the logic board to the LCD screen to see if it has become disconnected. It is common for smartphones that often get dropped a few times. It’s best to plug the connectors back to regain your screen’s functionality.

However, this requires technical know-how. It’s better to seek help from a professional as you could risk causing more damage to your device if you don’t know what you’re doing.

Method 4: Perform a Factory Reset

If all the methods above did not solve your problem, the last resort you can take is to perform a Factory Reset. This method works on Android and iOS smartphones and erases all your data. It is the quickest way to try to fix why your phone screen went black. Here are the steps.

For Android Users

If you’re on Android, tap Settings > Backup and Reset. Tap on Factory data reset > Delete all to initiate the factory reset.

If you cannot do this, here’s how to perform a factory reset manually using Recovery Mode.

Note

The process of booting into Recovery Mode is not the same across all Android devices and depends on the manufacturer and model of your phone. Refer to your owners manual to see which method is the right one for your Xiaomi Redmi Note 12 Pro 4G.

Step 1A: Press and hold the Power button and Volume Down buttons simultaneously and continue holding until the screen starts.

Step 1B: For Android devices with a Home button, press and hold the Home button and the Power button and continue holding until the screen starts.

Step 1C: Press and hold the Power button as well as the Volume Up and Volume Down buttons simultaneously and continue holding until the screen starts.

Step 2: Use the Volume buttons to navigate the choices and select Wipe data/factory reset and confirm your choice with the Power button.

Step 3: Simply wait for the process to complete and wait for your Xiaomi Redmi Note 12 Pro 4G to restart automatically.

F****or iOS Users

Step 1: For iOS users, meanwhile, tap Settings > General > Transfer or Reset iPhone.

Step 2: Next, choose Erase All Content and Settings. Check the list of items you want to remove.

Step 3: Tap Continue and enter your iPhone passcode. A message warns you that the process will delete all media and data and reset all settings.

Step 4: Tap Erase iPhone to confirm. You’ll be asked to type in your Apple ID and password if Find My is active. Enter your password and tap Erase.

Part 3: How To Fix Black Screen Phone With an Alternative

If your phone screen went black but still works and doing the methods above did not solve the issue, you can use Wondershare Dr.Fone for iOS and Android as a last resort. It’s one of the most popular smartphone repair tools today, enabling you to fix all kinds of annoying scenarios. These include black screen, boot loop, white screen of death, bricked iOS or Android device, and more.

KoolReport Pro is an advanced solution for creating data reports and dashboards in PHP. Equipped with all extended packages , KoolReport Pro is able to connect to various datasources, perform advanced data analysis, construct stunning charts and graphs and export your beautiful work to PDF, Excel, JPG or other formats. Plus, it includes powerful built-in reports such as pivot report and drill-down report which will save your time in building ones.

It will help you to write dynamic data reports easily, to construct intuitive dashboards or to build a whole business intelligence cockpit.

KoolReport Pro package goes with Full Source Code, Royal Free, ONE (1) Year Priority Support, ONE (1) Year Free Upgrade and 30-Days Money Back Guarantee.

Developer License allows Single Developer to create Unlimited Reports, deploy on Unlimited Servers and able deliver the work to Unlimited Clients.

Key Features

Dr.Fone – System Repair for iOS and Android has fantastic features you can immediately take advantage of. Here are its key features below.

• Fix all Android and iOS Problems in Minutes

Dr.Fone – System Repair can fix all kinds of issues on your Android/iOS, such as a black screen, white screen of death, screen freeze, boot loop, or recovery mode. All of this can be done within less than 10 minutes to save you precious time.

• Supports up to 1000+ Android Smartphones and the latest iOS

All iOS versions, including the latest iOS 16 and iOS 16 beta, are fully supported by Dr.Fone – System Repair. The app handles all your smartphone issues without data loss to secure your info. On the other hand, if you own an Android, the app supports up to 1000+ Android smartphones, making it highly versatile for Android owners.

Tech Specs

Dr.Fone – System Repair (Android)’s minimum system requirements for your computer are listed below.

Computer OS	Android
Windows 11, 10, 8.1, 8, 7	Android 2.1 and up to the latest

Meanwhile, here are the system requirements for Dr.Fone – System Repair (iOS).

Computer OS	iOS
Windows 11, 10, 8.1, 8, 7	Supports all iOS versions, including the latest iOS 16 and iOS 16 beta
macOS 12, 11, 10.15, 10.14, 10.13, 10.12, 10.11, 10.10, 10.9, 10.8

Pros and Cons

If you’re still undecided about Dr.Fone – System Repair, here are its pros and cons.

Pros

• Fone – System Repair for iOS and Android has a clutter-free and beginner-friendly user interface. It’s easy to understand and use, so you can start immediately.
• Both the iOS and Android versions finish the repair tasks within less than 10 minutes to save you time.

Cons

• Each version for each OS is sold separately.
• The free version works up to your device’s compatibility. Once you start the repair process, the app will ask you for a valid license key.

How to Fix Black Phone Screen With Dr.Fone – System Repair

Here’s how to fix your phone screen with Dr.Fone – System Repair on iOS/Android.

Step 1: Download and install Dr.Fone – System Repair for iOS or Android. Next, open the program and connect your smartphone.

Step 2A (For iOS): Choose the correct model of your iPhone for the program to be able to download the appropriate firmware package.

Step 2B (For Android): Click Start. On the next window, choose the Brand, Name, Model, Country, and Carrier of your smartphone, then click Next.

Step 3: Follow the on-screen instructions provided on the main program window and wait for the repair process to complete.

vMix HD - Software based live production. vMix HD includes everything in vMix Basic HD plus 1000 inputs, Video List, 4 Overlay Channels, and 1 vMix Call
This bundle includes Studio 200 for vMix from Virtualsetworks, HTTP Matrix 1.0 automation scheduler, and 4 introductory training videos from the Udemy vMix Basic to Amazing course.

safe & secure

4,262,204 people have downloaded it

Conclusion

Our increasing reliance on smartphones has led to amazing advancements in new technologies. However, lingering issues such as your phone screen not turning on or your phone screen being black but still working are ongoing problems to many. That’s why learning how to prevent these events is essential to take care of your smartphone.

Doing all the recommended methods above usually solves the case. If the different fixes don’t work for you, Dr.Fone – System Repair for iOS and Android can help resolve all your problems within less than 10 minutes. You can download it for free on Windows and Mac to test it yourself.