Guide: How To Unbrick a Bricked Lava Agni 2 5G Phone

Lava Agni 2 5G phones are super popular thanks to their excellent features and affordable prices. But being so popular means people try to customize them with custom software. If you’re not careful, you might have a “bricked” Lava Agni 2 5G phone. It won’t work at all. It will be more like a brick than a smartphone.

Don’t worry, though. This guide is here to help. It will show you how to unbrick your phone step by step. You’ll learn to bring your phone back to life and make it work again. So, get started on fixing your bricked Lava Agni 2 5G phone by reading this article.

Part 1. Common Reasons Why Lava Agni 2 5G Phones Get Bricked

A bricked phone might sound like a techy term, but it’s pretty simple – when your Lava Agni 2 5G phone turns into a lifeless block that won’t do anything. In this section, you’ll learn all about why this happens, so you can avoid these issues and keep your phone alive as long as possible.

• Trying to flash incompatible ROMs. Sometimes, people want their Lava Agni 2 5G phones to run different software like a custom version of Android called a ROM. But if you use the correct ROM for your specific phone, it can mess things up nicely. Also, inexperience with ROM flashing can hard brickyour Lava Agni 2 5G Be sure to follow guides and ask for community help online.
• Rooting mishaps/failures.“Rooting” means giving your phone superpowers, but if you mess up, it can go wrong. Your phone might not boot up, leaving you with a brick. Like the previous bullet, follow guides carefully, especially if inexperienced.
• Failed Firmware Updates. When your phone asks you to update its software, following the instructions carefully is essential. If you interrupt the process or something goes wrong, your phone could be bricked.

Now, you must know about soft and hard-bricking to learn how to diagnose your phone. Soft bricking is like a phone’s bad day – it might not start up. However, with the right help, you can fix it. Hard bricking is worse. It’s when your phone is a paperweight – it won’t turn on, respond, or do anything useful.

Part 2. Method 1: Use the Lava Agni 2 5G Flash Tool To Recover Bricked Lava Agni 2 5G Phones

Say you’ve accidentally bricked your Lava Agni 2 5G phone due to rooting or ROM flashing. You might feel scared, but imagine having a magic wand that can fix your bricked phone. That’s what the Lava Agni 2 5G Flash Tool is –a dedicated Lava Agni 2 5G unbricking tool. It lets you install or flash different software onto your phone, giving it a fresh start. Most of the time, a simple firmware flash will unbrick your Lava Agni 2 5G.

The Lava Agni 2 5G Flash Tool is a superhero for various situations. Here are some scenarios where it can save the day:

• **Device Recovery.**If your phone is bricked or acting strange, the Flash Tool can help bring it back to life.
• Firmware Updates. You can use it to install official updates released by Lava Agni 2 5G, ensuring your phone runs smoothly.
• **Device Customization.**Want a different look for your phone? The Flash Tool can help you install custom ROMs or themes.
• **Bug Fixes.**Got pesky bugs or glitches? The Flash Tool can replace corrupted software to make your phone behave.
• Performance Enhancement. If your phone feels sluggish, the Flash Tool can boost its speed by flashing a new OS.

How To Use the Lava Agni 2 5G Flash Tool To Unbrick a Lava Agni 2 5G Phone

Now that you know what the Lava Agni 2 5G Flash Tool is all about, it’s time to learn how to use it. If you’ve bricked your Lava Agni 2 5G phone, follow the steps below:

• Step 1. Download the Lava Agni 2 5G Flash Tool and the stock firmware of your device on your computer.
• Step 2. Turn off your phone. Then, press and hold the Volume Down + Power Key simultaneously for 6-8 seconds. This will force your phone to enter the Fastboot mode.

• Step 3. Connect your phone to your computer using a cable when you see this screen flash.

• Step 4. Using the Lava Agni 2 5G Flash Tool, click Select. Then, locate the firmware files you downloaded earlier.

• Step 5. Click the refresh button until the flash tool recognizes your device. Then, click flash to replace the firmware. A text saying “success” should appear under the result column.

Congratulations! Your phone should be up and working after following these steps.

Part 3. Method 2: Wondershare Dr.Fone System Repair – Your One-Stop Shop for Unbricking Your Lava Agni 2 5G Phone

If you gave the Lava Agni 2 5G Flash Tool a shot and your phone is still not cooperating, don’t lose hope. Sometimes, the magic touch needs a slight variation. That’s where Dr.Fone comes into play. This dedicated software can work wonders when fixing various phone problems. It can even help in cases of bricked Lava Agni 2 5G phones involving software or firmware issues.

Dr.Fone - System Repair (Android)

Repair Android System Errors without Any Trouble.

• Fix your Android to normal, no skills required.
• Fix various Android system issues, stuck in boot loop , black screen , or won’t turn on , looping on start, etc.
• The high success rate in resolving Android system issues.
• Compatible with a wide range of Android devices and OS versions
• User-friendly interface with easy-to-follow steps.

3981454 people have downloaded it

One of Dr.Fone’s most astonishing powers is its “System Repair” feature. This is where the real magic happens. If your Lava Agni 2 5G phone is bricked, it can help repair the underlying software glitches that caused the issue. Moreover, Dr.Fone brings a toolbox of features to the table, making it more than just a one-trick pony. Here are its key features:

• **Data Recovery:**If you’ve lost precious data, Dr.Fone can help recover it, even from a bricked phone.
• **Data Transfer:**You can quickly move data between devices, even if one is unresponsive.
• **System Backup & Restore:**Fone can help you create a backup of your phone’s system and restore it when needed.
• **Unlocking Tools:**If you’re locked out of your phone, Dr.Fone can help you regain access.

How To Use Dr.Fone System Recovery Feature To Unbrick a Lava Agni 2 5G Phone

Now that you know about Dr.Fone, it’s time to understand how to use it. Hopefully, it can save your bricked Lava Agni 2 5G phone from its problems. Follow the steps below:

• Step 1. DownloadDr.Fone from its official website , and launch it on your computer. After entering the Toolbox menu from the left panel, click System Repair. Make sure that your Lava Agni 2 5G phone is connected.
• Step 2. Select Android on the next screen.

• Step 3. Initiate the Android System Repair by clicking Start.

• Step 4. Confirm your device details. You can edit any details that might be wrong.

• Step 5. Put your phone into Download mode. Follow the guidelines for phones with or without home buttons. Your phone will begin downloading the dedicated firmware.

• Step 6. After downloading the firmware, verify and proceed with the installation by clicking Fix Now. Confirm firmware installation by typing “000000” into the text box in the appearing window. Click Confirm afterward.

• Step 7. After the process is finished, your phone should now be okay. Click Done.

Part 4. Best Practices/Tips Before Unbricking Your Phone

Before diving into the unbricking process, you must arm yourself with some tips and precautions to ensure your recovery journey is as smooth as possible. Here’s what you need to know:

• Backing Up Data: An Ounce of Prevention. Remember the golden rule: always back up your data before attempting any phone recovery. Unbricking might save your phone, but being safe is better than sorry.
• **Authentic Tools and Software: Stay on the Safe Side.**Using genuine and trustworthy tools is crucial when unbricking your Lava Agni 2 5G This applies especially to Dr.Fone, which you should only download from the official website. Additionally, when recovering your phone’s software, use authentic Lava Agni 2 5G ROMs (the operating system’s files).
• **Learning from Online Guides and Communities: Seek Guidance.**Navigating the unbricking process might seem daunting, but you’re not alone. There are many online guides, tutorials, and communities where people share their experiences and solutions.

Conclusion

So, there you have it – your guide to fixing a bricked Lava Agni 2 5G phone. Remember, bricking happens when your phone stops working. You won’t be afraid when that happens, as you learned about the Lava Agni 2 5G Flash Tool and Dr.Fone. They are your phone-saving superheroes that can unbrick even a hard-bricked Lava Agni 2 5G phone.

As a parting reminder, always keep a tool ready for emergencies. For this, choose Dr.Fone. It’s a super tool for all your phone problems. Give it a shot and be confident with your phone wherever you go and whatever you do with it.

safe & secure

3,052,835 people have downloaded it

Reasons for Lava Agni 2 5G Stuck on Boot Screen and Ways To Fix Them

One of the main reasons why people own a phone is for convenience. It will be ironic if that device, supposed to grant convenience, provides problems instead. Some people face this when their Android phone is stuck on the logo page and unable to do anything. As expected, this is common in Android phones and is why people are unhappy with Android phones.

This article will share the possible reasons why your Android phone is stuck on the boot screen. This article will share three possible reasons for this problem and five valuable tips to help fix this issue. If all else fails, we have an application to share and recommend that is guaranteed to solve your problem in no time. Keep on reading to find out more!

Part 1. Why Is Your Lava Agni 2 5G Stuck on the Boot Screen?

There are countless reasons why a problem happens, just like why your Android phone is stuck on the logo page. This section sieved out the top 3 reasons why your Android boot screen happens and some tips to overcome it.

1. Changes to the Software

Android is a flexible operating system. It allows users to customize it in any way they desire, which is Android’s beauty. The customizable nature of the operating system allows users to unlock, root, flash, and tinker. However, this flexibility in customization might be a double edge sword. Accidental tampering with the Android system might result in software problems, such as being stuck on the Android boot screen.

Fortunately, this is not a complicated fix. Android accepts different fixes and allows the system to return to how it once was. Even with software issues, the system does not get completely inoperable. The best way to fix changes to the software is to start from the beginning of the process. This might offer the best chance for you to restore your phone to normal.

Although it is fun to customize and change the software, following trusted sources ensures you do not damage your phone. Having an Android phone stuck on the logo page is one of the many examples of the problems that might happen if changes to the software go out of hand.

2. Android Software Updates

Updates are a common cause of Android phones stuck on the logo. It happened when the update did not complete as it should have been. Several reasons for incomplete updates, such as poor internet connection, the connection between computer and phone being lost, a power cut, the phone freezing, and the list go on. When an update is uncompleted, issues such as being stuck at the Android boot screen and many others might occur.

Before an update starts, your mobile device will notify you of the duration of the update. As a tip, set aside an additional 10-15 minutes on top of the update duration to ensure your update is completed successfully. It will be ideal for activating the software update only when there is sufficient power in your phone or keep it charging during the update.

When an update is disrupted or stopped before it completes, the existing Android version will become corrupted while the new software to be updated is incomplete. This means that your Lava Agni 2 5G has no system to run on. Always complete your software updates, and you will not have the problem of your Android phone getting stuck on the logo.

3. Malfunctioning Applications

If you noticed that your Android phone is stuck on the logo page only after installing certain apps, there is a high chance that the app is not compatible with the existing apps in your phone or with the Android version. When an app conflicts with the Android system or other apps, this will run into problems with your phone.

This problem typically happens when an app is downloaded from a third-party source, not the official Google Play Store. This app from a third-party source might be malicious or contain a virus. This can cause problems such as being stuck at the Android boot screen.

To overcome this, locate the app that has been giving you issues and remove the app from your phone. Restart your device, and you should be able to have your Lava Agni 2 5G functioning properly.

Part 2. 5 Helpful Ways To Fix Android Phones Stuck on Boot Screen

After understanding the common problems on why your Android phone is stuck on the logo page, here are five easy solutions you can try solving at home.

1. Force Reboot

When encountering problems with your Lava Agni 2 5G, such as being stuck at the Android boot screen, you should first try a forced reboot. This simple yet effective solution could be what you need to solve all your Android problems. It is essential to leave your device turned off for at least a minute or two before turning it back on.

2. Pull Out Battery

Another way to restart your Lava Agni 2 5G when it is frozen is to try taking the battery out. Android devices are designed with a removable battery, and sometimes you can resolve the issue easily by removing the battery and replacing it after a couple of seconds. Then, turn on your device again and test to see if your Android phone is stuck on the logo page.

If it works, then the problem is solved. However, some Android devices come with a built-in battery. For these kinds of devices, a stimulated battery pull should be attempted. A simulated battery pull is a set of instructions telling your Lava Agni 2 5G to switch off and on again. If your device does not offer the simulated battery pull option, omit this troubleshooting option.

3. Charge Your Device

If your Android phone is stuck on the logo page and not getting past it, no matter how many times you have tried, it may be due to a low battery! As simple as it sounds, plug your device into a power outlet and try restarting your phone. You might be surprised that this simple fix is all it takes to solve your Android problem.

4. Wipe Cache Data

Cache refers to a software or hardware component of an Android device that stores your program and data for reference. This data might result from the daily usage of your device or duplicate data from a different source on the Lava Agni 2 5G device. Similar to a computer, if the cache occupies too much space on your device, it might cause your Lava Agni 2 5G to become slower and eventually get stuck at the Android boot screen.

Wiping out the cache data from your Lava Agni 2 5G could free up more space, allow your device to function faster, and avoid problems such as being stuck at the Android boot screen. Do not worry; wiping the cache data is entirely safe and will not lead to any loss of important data or programs on your phone.

5. Factory Reset

If all the methods above fail, performing a factory rest might be your last option. However, it is important to note that performing a factory reset will erase everything on your phone, including apps, contacts, photos, etc. As a tip, back up all your data from your device before performing a factory reset. That way, you can still retrieve all your precious information after the reset.

Follow the steps below to perform a factory rest on your Lava Agni 2 5G:

Step 1: Turn off your phone and press the Power button and Volume Down button at the same time

Step 2: Use the Volume button to scroll the options and highlight Wipe data/factory reset. Press the Power button to begin the factory reset.

Part 3. Bonus Tip: Best App To Solve Android Phone Stuck On Boot Screen

If all the solutions above do not work and you do not want to perform a factory reset on your phone, one option is to use an app called Dr.Fone. It is one of the most effective phone recovery solutions and can help to bring your Lava Agni 2 5G back to a state like it was brand new. Being stuck on the Android boot screen will be a problem of the past.

Refer to the tutorial below to solve your Android phone is stuck on the logo page issue.

Step 1: Download and install Dr.Fone – System Repair (Android) on your computer. Open the application and connect your Lava Agni 2 5G to the computer.

Step 2: Select the issue you face on the next page. If you use a Lava Agni 2 5G phone, select Stuck at Lava Agni 2 5G Logo. Alternatively, you can click on Black Screen or Stuck in Boot Loop.

Step 3: Input the Brand, Name, Model, Country, and Carrier of your phone and click on Next.

Step 4: Follow the instructions provided on the page and wait for the system repair to finish. After which, click on Done to complete the process.

safe & secure

Conclusion

This article summarizes some possible reasons your Android phone is stuck on the logo page. Five useful strategies were shared to easily overcome your Lava Agni 2 5G being stuck in the boot. However, if all the above methods do not work, we recommend trying the Dr.Fone-System Repair.

Dr.Fone-System Repair repairs the operating system issues and fixes the problem with your Lava Agni 2 5G. Once you power on your Lava Agni 2 5G again, you can rest assured that it will be like new.

Lava Agni 2 5G Camera Not Working Unexpected Error? Fix It Now

For all its glory and goodness, the Android OS often has its users pulling their hair in frustration at just how buggy the OS can be at times. So, if you’re having one of those days today, we are here to help. Camera app is one of the most used apps on smartphones today. People only launch the app when they want to take a photo, for everything else there’s a dedicated photo gallery app. What happens when you launch the camera app only to realize it threw an error and you missed your photo moment? Don’t throw the phone, not yet. Let us help you out.

Part I: Why Is Android Camera Not Working?

There are a few reasons why the camera app is not working on your Lava Agni 2 5G.

Low Memory

Camera app does rely heavily on system resources, so in case you have too many apps open and for some reason the OS is not able to manage the resources appropriately for the camera app to function as it should, you will get a camera error.

Low Storage

The camera app needs storage space to save the photos it takes. So, in case your phone is running low on storage space, the camera app would likely malfunction as it would have no way to store the photos it would be taking.

General Bugs And Glitches

OS bugs and general glitches within the OS and the camera app can cause camera not working issue anytime during everyday operation. This is part and parcel of any technology.

Hardware Issues

In the rarest cases, there might have developed an actual hardware issue with the camera system on your Lava Agni 2 5G. The likely culprit is misuse and abuse, such as a dropped phone or maybe the phone was too hot for extended periods of time, causing hardware issues.

Part II: How To Fix Android Camera Not Working Issue?

So, how to get the Android camera not working problem solved? There are a few ways you can try fixing the camera not working issue on your Lava Agni 2 5G right where you are, without needing to take the Lava Agni 2 5G device to the manufacturer’s service center.

II.I: Restart The Handset

One of the first things to do any time an app or your phone or tablet does not work like it should, restarting the Lava Agni 2 5G device refreshes everything just enough to resolve most commonly occurring issues.

Use the power button on your smartphone to restart your Android handset and see if this resolves the issue.

II.II: Close And Relaunch The Camera App

If the camera app (or any app for that matter) has been in the background for a while and then it is brought to the foreground, there are always chances of it crashing for any reason, or not working as expected. So, closing the app completely and relaunching it is recommended.

Step 1: Launch the app switcher on your specific Android device the way your device manufacturer suggests you to. Usually, it is a swipe up and hold gesture to get into the app switcher.

Step 2: Next, you can choose to close just the camera app or, better yet, close all apps by tapping the Close All button. Flicking any app upwards (quick upward swipe) is how you close an app. If there is no Close All button anywhere, repeat the gesture for all open apps.

II.III: Check App Permissions

These days, thanks to strides in the privacy initiatives, apps need permissions before they can function the way they do. Most of the times, apps such as camera do have the necessary permissions, but sometimes it is possible that the permissions are set incorrectly. To check if the camera app has the requisite permissions, do the following:

Step 1: Go to Settings > Apps > Camera > Permissions.

Step 2: Tap Camera.

Step 3: See if the selected option is Allow Only While Using This App. If not, select it.

II.IV: Clear The Camera App Cache

Clearing the camera app cache is sometimes helpful. To do that:

Step 1: Go to Settings > Apps > Camera and tap Storage Usage.

Step 2: Tap Clear Cache.

II.V: Clear The Photo Gallery App Cache

The camera app is closely tied to the photo gallery app that comes baked in into Android OS. That is because photos that the camera app takes are stored in the photo gallery app. Consequently, if there were any issues in the photo gallery app, that could lead to the camera app not working on Android problem. Here’s how to clear the photo gallery app cache:

Step 1: Go to Settings > Apps > Photos > Storage Usage.

Step 2: Tap Clear Cache.

II.VI: Check For App Updates

This does not happen always, but sometimes, with known bugs and issues, there may be an update released that fixes those bugs and issues that prevent some users from using a given app reliably. Checking for updates is a good step to make sure that your camera app is updated to the latest version possible.

Step 1: Go to Play Store and tap your profile picture on the right.

Step 2: Tap Manage Apps and Device.

Step 3: If there are updates available, Tap Update All to update all apps.

II.VII: Cool The Phone Down

We do not realize the immense power that is packed into the thin smartphone form factor these days. If you have been using the phone to video chat for a while now, you might not realize that the phone has become hot, especially if you are using a desk stand. Same for shooting high-resolution videos; the phone does get quite hot shooting high-resolution videos.

If this is the case, close all apps and let the phone cool down. You might even want to shut the phone off to help cool it faster.

II.VIII: Nudge The Camera System

You may want to tap your camera system (the lenses and surrounding area) gently to see if that gets the camera working. In case it did, this is indicative of a hardware issue, and you should get it checked at the service center at your earliest convenience.

II.IX: Fix Android Camera Not Working Issue In One Click (With Dr.Fone)

Now, if the above fixes have not worked, you might want to repair your Android OS once before you make that appointment with the service centre. And, we have just the app to help you fix your camera not working on Android problem quickly.

Wondershare Dr.Fone is a multi-module app that works on both Windows and macOS and is the only app you will ever need to resolve nearly all of your smartphone and tablet issues that you are likely to encounter. Need to take backups? Dr.Fone Phone Backup has you covered with the ability to take and restore even selective backups, and to any location such as your computer or an external disk as well. Want to transfer WhatsApp chats to a new phone? Use WhatsApp Transfer to do just that! Bought a new phone? Use Phone Transfer to transfer contents from old phone to new, and then use Dr.Fone Data Eraser to securely wipe your old phone before giving it away!

Today, we will use Dr.Fone’s System Repair (Android) module to fix Android camera not working issue quickly.

Download Dr.Fone here.

safe & secure

Step 1: Launch Dr.Fone app on your PC or Mac.

Step 2: Click System Repair module and then Android.

Step 3: For now, don’t bother with the scenarios given and click Start to go to the next screen.

Step 4: Your Android device will be detected by Dr.Fone. If anything seems incorrect, use the dropdown options to change it, and click Next.

Step 5: Your phone needs to be put into Download mode before it can be repaired. Follow the instructions shown onscreen and click Next.

Step 6: Dr.Fone automatically downloads the most recent firmware for your device and when it is ready, waits for your input. Click Fix Now to start the repair process.

Step 7: You will need to enter a 6-digit code (digit zero, six times – 000000) to confirm and begin the repair process.

When the repair is complete, Dr.Fone shows the final screen as below:

safe & secure

Conclusion

The camera app on your smartphone is one of the most important apps you use. This is not a game; this is an app that makes previous memories possible for you. So, when you get any of those incorrigible errors that are impossible to make sense of, what do you do? This guide gives you 9 fixes to fix Android camera not working error quickly and easily.